• Acrylic coating
    Acrylic coating

    2024-01-26

    Acrylic paint is a fast drying paint made from pigments suspended in acrylic polymer emulsions and plasticizers, silicone oils, defoamizers, stabilizers, metal soaps. Acrylic paint is water-soluble, but becomes resistant to water when dried.Depending on the amount of paint diluted with water, or modified with acrylic gels, media, or pastes, the final acrylic paint can resemble watercolor, gouache, or oil painting, or have unique properties that other media cannot achieve. Acrylic paint properties The medium and binder for oil-based paints is linseed oil (or another drying oil), while acrylic paints use water as a medium for an acrylic polymer emulsion (suspension) that acts as a binder. For this reason, paint is said to be "oil-based" while acrylic paint is "water-based" (and sometimes "water-based"). The difference between acrylic and watercolor paint The significant difference is that acrylic is opaque, while watercolor is essentially translucent. Both acrylic and watercolor are easy to clean with water. Acrylic can be removed from the brush using soap and water. Watercolor pens, on the other hand, can only be cleaned with water. Sinograce Chemical is mainly based on various acrylic resins acrylic coating, welcome customers and friends to negotiate!

    read more
  • Self-adhesive printing process
    Self-adhesive printing process

    2024-01-25

    First, the choice of self-adhesive printing raw materials When selecting raw materials, we must choose high-quality self-adhesive materials with qualified physical and chemical indexes, rather than products with expired or unstable physical and chemical indexes. Although the latter price is low, but due to the unstable quality of such materials, large consumption in each process, and even lead to the normal processing of equipment, waste of raw materials at the same time also waste a lot of manpower and material resources, the processing cost of the finished product label is not necessarily low, more serious is that there may be customer returns, and even lose customers. The selection of raw materials should be considered from the following two aspects 1.Self-adhesive printing and self-adhesive printing processing characteristics ①The surface gloss and color consistency of the self-adhesive printing surface material and the uniformity of the density determine the uniformity of the ink absorption of the self-adhesive material, and also determine the color difference of the same batch of label printing. The coating strength of the surface material determines whether a large amount of paper powder will be produced when printing, and is also an important indicator to determine the quality of printing. ②The thickness uniformity and strength indication of self-adhesive printing base paper and surface material These indicators are not only related to printing performance, but also an important indicator to determine the uniformity of die cutting and the speed of waste discharge and paper edge breakage. If these indicators are too low, the label machine can not be produced at high speed ③ Flatness or uniformity of rewinding tension of self-adhesive printing materials Whether it is single sheet printing or web printing, the flatness of the material determines whether the printing can be correctly fed, run and register, and receive paper. For the reel material, the rewinding tension will play an important role in the flatness of the end face of the reel material, whether there is infiltration and whether it can be correctly registered. ④ The uniformity and correct coating amount of self-adhesive printing adhesive and silicone oil coating These indicators directly affect the stripping force (release force) between the label and the bottom paper, and the size of the stripping force directly affects the die cutting waste and the speed of the machine, and the stripping force also determines the label marking condition, that is, the application situation. In addition, the size of the amount of glue will also affect the cementing condition of the end surface of the material. Therefore, the purchase of self-adhesive materials should be carefully tested, and those materials with the appropriate amount of glue and silicon coating should be selected. Sinograce Chemical Co., Ltd. is mainly based on water-based glue, water-based self-adhesive adhesive, water-based lab...

    read more
  • Non-stick coatings, which materials and enterprises can make a big difference?
    Non-stick coatings, which materials and enterprises can make a big difference?

    2024-01-20

    Non-stick coating refers to the coating formed after coating with low surface energy, easy to clean and other characteristics of the coating, which is widely used in all kinds of food contact, hardware products, mechanical parts, chemical equipment, electrical equipment. Non-stick pans are also the most widely recognized non-stick paint application scenarios. 1, non-stick coating has fluorine resin system, silicone system, ceramic system three mainstream products. At present, the non-stick coatings on the market are mainly divided into fluorine resin non-stick coatings, silicone non-stick coatings and ceramic non-stick coatings, among which fluorine resin non-stick coatings are the mainstream, fluorine resin non-stick coatings can be divided into polyimide binders and polyaryl ether binders according to the differences in binders. In the future, polyaryl ether binders will be the direction of technological evolution. According to the type of solvent, it is divided into water-based non-stick coating, oily non-stick coating, powder non-stick coating, and water-based non-stick coating is the mainstream at present. 2, fluorine resin non-stick coating: performance "unique", generally need special engineering plastics as adhesive use. Fluorine resin non-stick coating is usually PTFE based PTFE, PFA, FEP three mixture of the form exists, binder to polyimide, polyaryl ether two types of special resin based, coating performance to composite multi-coating is best, fluorine resin non-stick coating has the best non-stick and comprehensive protection effect, in addition to the field of kitchenware and home appliances has a better application, Fluorine resin non-stick coatings can also be widely used in harsh acid, alkali, salt, high temperature protection, lubrication requirements, such as chemical reactors, large industrial nuts and bolts. However, due to the high melting point of fluorine resin and adhesive resin, the coating film baking temperature is high and the energy consumption is large, the adhesive resin is difficult to water-based processing and high energy consumption, and it is difficult to avoid the use of high temperature solvent when baking film, which limits the further improvement of fluorine resin non-stick coating in environmental protection. Fluorine resin PTFE, PFA, FEP are perfluoroppolymer, molecular chain structure due to C-F bond, its bond energy of 485kJ/mol, in all chemical bonds can be called the first, long-term use temperature 220℃, almost with all substances are not bonded, with excellent chemical stability, heat resistance, acid and alkali resistance, flame retardant, aging resistance and self-lubrication. Applied to non-stick coatings, in the range of cooking oil smoke temperature 180℃, fluorine resin structure is stable, safe and reliable, its low surface energy properties can effectively prevent food oil, protein and other materials adhesion and penetration, so it becomes the ideal choice for manufacturing non-stick coating...

    read more
  • laminated adhesive Laminating adhesive for deep embossing BOPP film PET film paper coated glue
    laminated adhesive Laminating adhesive for deep embossing BOPP film PET film paper coated glue

    2024-01-19

    Brand :Sinograce Type: Water  base adhesive Appearance:Milky white emulsion with blue light Performance and use:This product is suitable for the coating of BOPP film, PET film and printed color paper (dry coating process). High bonding q degree, large tension compound drying speed, good parallel flow; For gold and silver cardboard, single powder paper bonding q degree, tension q, to avoid the socket opening; Meet the requirements of bump, embossing, beer line, hot stamping and other post-process; · Green and environmentally friendly products, without adding phthalates.

    read more

Copyright © 2015-2024 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com

top