Search
  • Pure Acrylic Emulsion
    Pure Acrylic Emulsion PA-239
    Pure acrylic emulsion is designed for high grade exterior wall latex paint. Excellent water resistant, weatherability, outstanding yellowing&aging resistance.
    read more
  • polyurethane metal topcoat
    Water based polyurethane metal topcoat (PU-203)
    PU-203 is water based polyurethane dispersion composed of polycarbonate structure. It is developed high hardness, high gloss, abrasion resistance, water resistant and excellent salt-fog resistance.
    read more
  • non-yellowing PU coating
    Flexible and non-yellowing PU coating for textile PU-403
    It is a kind of soft economical co-solvent free polyurethane for a variety of textile or flexible substrate applications.
    read more
  • Oil-Soluble Polyurethane Hydrophobic
    One Component Oil-Soluble Polyurethane Hydrophobic Foam PU-111
    It is one component oil-soluble polyurethane hydrophobic foam, it reacts with water and expands to be a foam does not dissolve in the water. Not only used for waterproof plugging, but also with effect of reinforcement. It is widely used in subway tunnels, water conservancy and hydroelectric power, basement parking, sewage etc. for waterproof plugging and reinforcement projects.
    read more
  • Water based polyurethane
    Water based polyurethane for wood topcoat PU-105
    Water based polyurethane is an easy-to-apply, quick clean-up, crystal clear finish for interior wood surfaces. Formulated with state-of-the-art resins, this clear finish is non-yellowing and perfect for use over light or natural wood colors. It dries quickly and can be recoated in only two hours. This extremely durable finish resists abrasion, alcohol, water and virtually all household chemicals. This product has superior hardness and adhesion.
    read more
  • Water based polyurethane
    Water based polyurethane for wood primer PU-106
    Aromatic polyurethane dispersion is designed for wood primer. It is designed specifically for use on interior and exterior new and unpainted hard and soft wood before applying a paint topcoat.
    read more
  • Water based PU
    Water based 2K PU for wood furniture coatings PU-107
    Water based 2K polyurethane systems are a new technology which is already successfully used in many applications also for wood coatings and more specifically furniture finishes, without having to sacrifice quality. Some properties like the ease of introduction by hand of the hardener and the determination of the pot-life through the viscosity increase can be optimized by choosing the right solvent to dilute the polyisocyanate.
    read more
  • JS cement waterproof emulsion
    JS cement waterproof emulsion WF-800
    A Suitable for polymer cement waterproofing slurry and polymer cement waterproof sand
    read more
  • Castable Polyurethane prepolymer
    Castable Polyurethane prepolymer IPDI System
    Description Polyurethane prepolymer IPDI system Key features Good transparency Excellent UV resistance Low viscosity at room temperature With adjustable curing time. Typical properties IPDIsystem IPDI-230 IPDI-231 IPDI-232 Prepolymer Appearance (25℃) Colorless Transparent Liquid Colorless Transparent Liquid Colorless Transparent Liquid NCO Content(%) 400±100 400±100 400±100 Using Mixture Ratio (PHR) 100:100 100:100 100:100 Life in the Reaction Kettle 180~480 180~480 180~480 Stripping Time(90-100℃/min) 3~5 3~5 3~5 Physical Properties of Finished Products Hardness (Shore A) 65±5 85±5 70±5D Tensile Strength (MPa) 15.2 17.0 22.3 Tearing Strength (kN/m) 10 19 25 Elongation at Break(%) 170 130 110   Application -The utility model is mainly used for the production of products which are not required to be changed, such as a lens, an instrument panel, and can also be used for dripping glue, making nameplate, labels, etc. Usage method -The utility model can be used for manual operation, and is more suitable for gluing machine and pouring machine. Attention The prepolymer should be stored at low temperature and dry place, avoid the moisture and moisture when used After the opening of the prepolymer should be used up as soon as possible, if not exhausted with nitrogen seal. The storage period of unopened prepolymer is three months. If you want to add color paste or other materials, keep the water content below 0.1%, and consider the compatibility of additives. The prepolymer should be stored at low temperature and dry place, not long time at higher temperatures (more than 75 degrees Celsius) heating.
    read more
  • liquid Polyurethane elastomer
    Polyurethane prepolymer NDI, PPDI System
      Description Polyurethane prepolymer NDI, PPDI system Key features The utility model has the advantages of high dynamic mechanical property, especially heat resistance, and can work in the environment of 120 DEG C for a long time. Typical properties NDI、PPDI system NP-240 NP-245 Prepolymer Appearance (25℃) Waxy solid Waxy solid NCO Content (%) 3.6~4.2 3.6~4.2 Using Mixture Ratio (PHR) 3.7~4.3 3.7~4.3 Life in the Reaction Kettle 3~5 3~5 Physical Properties of Finished Products Hardness (Shore A) 90±5 90±5 Tensile Strength (MPa) 53.5 57.1 Tearing Strength (kN/m) 129.5 131.7 Elongation at Break (%) 523 551 Akron Abrasion (cm3/1.61km) 0.01 0.01 Application -The utility model is mainly used for producing products with the characteristics of heat resistance, high abrasion resistance, high bearing capacity, low internal heat generation, etc. Usage method -Can be used for manual operation, more suitable for the operation of the casting machine, chain extender is BDO or HQEE, etc. Attention The prepolymer should be stored at low temperature and dry place, avoid the moisture and moisture when used After the opening of the prepolymer should be used up as soon as possible, if not exhausted with nitrogen seal. The storage period of unopened prepolymer is three months. If you want to add color paste or other materials, keep the water content below 0.1%, and consider the compatibility of additives.
    read more
  • Hot sale Castable Polyurethane prepolymer Polyol MDI System
    Castable Polyurethane prepolymer Polyol MDI System
    Description Polyurethane prepolymer polyol MDI system Key features No irritating odor. Products have good toughness and elasticity. Excellent abrasion resistance and water resistance. Typical properties polyol MDI system P-MDI--100 P-MDI -101 P-MDI -102 P-MDI -103 P-MDI -104 P-MDI -105 Prepolymer Appearance (25℃) Waxy solid Waxy solid Waxy solid Waxy solid Waxy solid Waxy solid NCO Content(%) 5.5~6.5 6.6~7.2 7.5~8.5 5.0~6.0 6.0~6.8 7.2~8.0 Using Mixture Ratio (PHR) 5.6~6.6 6.7~7.3 7.6~8.6 5.1~6.1 6.1~6.9 7.3~8.1  Life in the Reaction Kettle (75~78℃/min) 8~10 5~7 5~7 8~10 5~7 5~7 Physical properties of finished products Hardness (Shore A) 60±5 85±5 95±5 60±5 85±5 95±5 Tensile Strength (MPa) 51.3 55.3 57.2 41.7 45.5 52.8 Tearing Strength (kN/m) 78.4 135.0 135.7 70.6 123.2 127.5 Elongation at Break (%) 516 520 498 461 577 558 Akron Abrasion (cm3/1.61km) 0.08 0.05 0.03 0.08 0.05 0.03 Application Mainly used in the production of polyurethane elastomer products with the corresponding requirements, such as a variety of industrial components, roller, rubber roller, rubber, oil seal, cushion material, plate, etc.. Usage method Can be used for manual operation, more suitable for the operation of the casting machine, chain extender are BDO and TMP, etc. Attention The prepolymer should be stored at low temperature and dry place, avoid the moisture and moisture when used After the opening of the prepolymer should be used up as soon as possible, if not exhausted with nitrogen seal. The storage period of unopened prepolymer is three months. If you want to add color paste or other materials, keep the water content below 0.1%, and consider the compatibility of additives.
    read more
  • Hot sale Castable Polyurethane prepolymer Polyether TDI System
    Castable Polyurethane prepolymer Polyether TDI System
    Description Polyether prepolymer polyether TDI system Key features General purpose products. High mechanical strength Good abrasion resistance, good hydrolysis resistance Easy to operate, low price. Typical properties Polyether TDI System PET- 510 PET- 511 PET- 512 PET- 513 PET- 514 PET- 515 Prepolymer Appearance (25℃) viscous liquid viscous liquid viscous liquid viscous liquid viscous liquid viscous liquid NCO Content(%) 2.8~3.0 3.6~4.0 4.2~4.5 4.8~5.5 5.5~6.0 6.0~6.8 Using Mixture Ratio(PHR) 8.0~8.5 10.0~11.5 12.0~13.0 13.5~15.8 15.5~16.0 16.0~18.8 Life in the Reaction Kettle(75-78℃/min) 8~10 5~7 5~7 3~5 3~5 3~5 Physical properties of finished products Hardness (Shore A) 60±5 75±2 80±2 85±2 90±2 95±2 Tensile Strength (MPa) 20.7 22.5 22.8 26.1 32.6 35.6 Tearing Strength (kN/m) 22.6 27.2 27.5 33.4 38.2 38.2 Elongation at Break(%) 401 377 358 350 320 313 Akron Abrasion(cm3/1.61km) 0.05 0.05 0.05 0.05 0.03 0.03 Application -Mainly used in the production of ordinary polyurethane elastomer products, such as a variety of industrial components, roller, rubber roller, rubber, oil seal, cushioning materials, plates, etc.. Usage method Suitable for manual and high temperature casting machine operation, chain extender is MOCA. Attention The prepolymer should be stored at low temperature and dry place, avoid the moisture and moisture when used After the opening of the prepolymer should be used up as soon as possible, if not exhausted with nitrogen seal. The storage period of unopened prepolymer is three months. If you want to add color paste or other materials, keep the water content below 0.1%, and consider the compatibility of additives.
    read more
  • Hot sale Castable polyurethane composite GEL
    Castable polyurethane composite GEL
    Description Polyurethane prepolymer GEL Key features Environmentally friendly non-toxic, tasteless, colorless and transparent. With a good rebound and feel. Typical properties GEL GEL-401 HZ-402 HZ-403                     Prepolymer Appearance (25℃) Colorless Transparent Liquid Colorless Transparent Liquid Colorless Transparent Liquid Part A viscosity at Room Temperature (25℃) 500±100 500±100 500±100 Part B viscosity at Room Temperature (25℃) 1000±100 1000±100 1000±100 Using Mixture Ratio (A:B) 100:20~25 100:20~25 100:25 Available Using  Ttime(25~35℃/min) 1~3 1~3 1~3 Stripping Time (90~100℃/min) 3~5 3~5 3~5 Physical Properties Hardness (Shore A) 0 0~5 0~25 Application -Mainly used in the production of various medical mats, mattresses, pillows, insoles, protective coating, etc. Usage method -The utility model can be used for manual operation. Attention The prepolymer should be stored at low temperature and dry place, avoid the moisture and moisture when used After the opening of the prepolymer should be used up as soon as possible, if not exhausted with nitrogen seal. The storage period of unopened prepolymer is three months. If you want to add color paste or other materials, keep the water content below 0.1%, and consider the compatibility of additives.
    read more
  • Hot sale Castable polyurethane composite Pouring Sealant
    Castable polyurethane composite Pouring Sealant
    Description Polyurethane prepolymer sealant Key features The cured product has excellent electrical insulation. Anti vibration, moisture, corrosion, etc. Typical properties  POURING SEALANT PS-800 Prepolymer Appearance (25℃) Yellow transparent liquid Part A viscosity at Room Temperature (25℃) 1500±100 Part B viscosity at Room Temperature (25℃) 1000±100 Using Mixture Ratio (A:B) 100:100 Available Using Time(25~35℃/min) 20~40 Stripping Time(25~35℃/min) 120~180     Physical Properties of  Finished Products Hardness (Shore A) 50±5 Tensile Strength (MPa) 8.0 Tearing Strength (kN/m) 21 Elongation at Break(%) 320 Volume Resistivity(Ω.cm) 1×1014 Application -Suitable for various electronic components, micro computer control board, etc. Usage method -The utility model can be used for manual operation, and is more suitable for gluing machine and pouring machine. Attention The prepolymer should be stored at low temperature and dry place, avoid the moisture and moisture when used After the opening of the prepolymer should be used up as soon as possible, if not exhausted with nitrogen seal. The storage period of unopened prepolymer is three months. If you want to add color paste or other materials, keep the water content below 0.1%, and consider the compatibility of additives.
    read more
  • High resilience and wear resistant
    Special properties polyurethane prepolymer High resilience and wear resistant
    Description Special properties of polyurethane prepolymer with high resilience and wear resistance Key features The material has high resilience under high hardness. Typical properties  High resilience HR-711 HR-712 HR-713 Prepolymer Appearance (25℃) Waxy solid Waxy solid Waxy solid NCO Content(%) 4.5~5.0 7.5~8.5 8.5~9.5 Using Mixture Ratio (PHR) 13.0~14.5 7.6~8.6 8.6~9.7 Life in the Reaction Kettle  (75~78℃/min) 8~10 5~7 6~8       Physical properties of finished products Hardness (Shore D) 90±5 95±5 90±5 Tensile strength (MPa) 48.2 57.2 57.7 Tearing Strength (kN/m) 112.0 135.7 143.5 Elongation at Break (%) 380 498 514 Rebound Rate (%) 55 58 58 Application -It is mainly used in the production of polyurethane products with high hardness and good elasticity. Usage method Can be used for manual, but also suitable for the operation of pouring machine, chain extender is MOCA or other chain extender. Attention The prepolymer should be stored at low temperature and dry place, avoid the moisture and moisture when used. After the opening of the prepolymer should be used up as soon as possible, if not exhausted with nitrogen seal. The storage period of unopened prepolymer is three months. If you want to add color paste or other materials, keep the water content below 0.1%, and consider the compatibility of additives.
    read more
  • High tensile tearing type
    Special properties polyurethane prepolymer High tensile tearing type
    Description Special properties polyurethane prepolymer high tensile tearing type Key features The material has high resilience under high hardness. Typical properties  High tensile tearing type HTT-901 HTT-902 HTT-903 HTT-904 Prepolymer Appearance (25℃) Waxy solid Waxy solid Waxy solid Waxy solid NCO Content(%) 6.0~6.5 7.5~8.5 6.0~6.5 4.5~5.5 Using Mixture Ratio (PHR) 17.0~18.5 7.6~8.6 17.5~18.5 13.2~15.8 Life in the Reaction Kettle (75~78℃/min) 6~8 5~7 6~8 5~6 Physical properties of finished products Hardness (Shore D) 95±5 95±5 95±5 90±5 Tensile Strength (MPa) 65.5 57.2 46.9 68.3 Tearing Strength (kN/m) 122.5 135.7 137.1 133.1 Elongation at Break(%) 380 498 552 431 Rebound Rate (%) 57 58 65 47 Application -It is mainly used in the production of polyurethane products with high hardness and good elasticity. Usage method -Can be used for manual, but also suitable for the operation of pouring machine, chain extender for MOCA or other chain extender. Attention The prepolymer should be stored at low temperature and dry place, avoid the moisture and moisture when used. After the opening of the prepolymer should be used up as soon as possible, if not exhausted with nitrogen seal. The storage period of unopened prepolymer is three months. If you want to add color paste or other materials, keep the water content below 0.1%, and consider the compatibility of additives.
    read more

Copyright © 2015-2017 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.Powered by dyyseo.com

top