Search
  • High performance wetting agent
    High performance wetting agent WET-245
    WET-245 is a high wetting agent modified by polyether siloxane copolymer. It has excellent substrate wetting, anti-crater effect and flow promotion performances. It is widely used in all kinds of water based and solvent based system.
    read more
  • Silicone wetting agent
    Silicone wetting agent for aqueous coatings WET-267
    WET-267 is a silicone wetting agent with low viscosity and low surface tension. Imparts good spreading and wetting properties. Improves the wetting of water printing inks on high slip PE, PP and PET used in packaging.
    read more
  • Low foaming organic silicone wetting agent
    Low foaming organic silicone wetting agent WET-270
    WET-270 is a low foaming silicone wetting agent with low viscosity and low surface tension. Imparts good spreading and wetting properties. Excellent anti-crater effect with flow promotion in water based, solvent based and radiation-curing formulations.
    read more
  • Low foaming organic silicone wetting agent
    Modified trisiloxane ethoxylate wetting agent/spray adjuvant WET-608
    WET-608 is a superspreading surfactant/wetting agent based on a trisiloxane ethoxylate. It lowers the surface tension of spray solutions, beyond that which is achievable with conventional adjuvants.
    read more
  • Polyether modified polysiloxane spray adjuvant
    Modified heptamethyltrisiloxane spray adjuvant WET-618
    WET-618 is a high superspreading surfactant modified by trisiloxane ethoxylate with super low surface tension. It lowers the surface tension of spray solutions, beyond that which is achievable with conventional adjuvants.
    read more
  • Polyether modified polysiloxane spray adjuvant
    Polyether modified polysiloxane spray adjuvant WET-628
    Description Polyether modified polysiloxane spray adjuvant WET-628 is a high permeability surfactant/wetting agent based on a polysiloxane. It lowers the surface tension of spray solutions, beyond that which is achievable with conventional adjuvants. Type Polyether modified polysiloxane Key features Nonionic Medium spreading High permeability Promotes spray volume reduction Promotes rapid uptake of agrochemicals (rainfastness) Superspreader for soluble liquid and emulsifiable concentrate formulations Typical properties Appearance:                                    Colorless clear liquid Active content (%):                           100% Density (g/cm3):                               1.01 Viscosity (cp, 25 ℃):                        100-130 Cloud Point (0.1 wt%), (℃):              49 CAS:                                                 No. 27306-78-1 Surface tension (0.1%, dyn/cm):      <22.5 Application -Plant Growth Regulators            0.025% to 0.05% -Herbicide                                    0.025% to 0.15% -Insecticide                                  0.025% to 0.1% -Fungicide                                    0.015% to 0.05% -Fertilizers and Micronutrients     0.015% to 0.1% Note: use rates are dependent on crop, agrochemical and spray volume requirements. Storage and handling Available in 25 kg/barrel or 200kg/barrel Store products in tightly closed original containers at 5-40℃ Shelf life: 12 months from delivery date According to non-dangerous goods transport How to use IN AGROCHEMICAL FORMULATIONS -WET-628 may be used as a component in agrochemical formulations. Although organosilicone surfactants are subject to hydrolysis under acidic or basic conditions, optimum performance is achieved by buffering the formulation to pH 6.5-7.5. Additionally, it is recommended that WET-628 spray adjuvant be used at a concentration of at least 5%,based on the total formulation. A TANK MIX ADJUVANT -WET-628 spray adjuvant, when used as a tank-side adjuvant may be used to improve spray coverage, improve uptake or to allow for a reduction in spray volume. WET-628 spray adjuvant is most effective as a tank-side adjuvant when spray mixtures are 1) within a pH range of 5-8, and 2) used within 24 hours of preparation. -High spray volumes, coupled with high surfactant rates, are not required to achieve sufficient coverage with WET-628 spray adjuvant. In fact, it has the potential to provide adequate coverage in many low volume spray applications at rates between 0.025% and 0.1%.
    read more
  • High performance surfactant
    High performance surfactant/penetrating agent OP-10
    Description OP-10 is a water-soluble nonionic surfactant composed of a 10-mole ethylene oxide adduct of octylphenol. Type Octylphenol Ethoxylate Key features Easily soluble in water Chemically stable and effective over a wide pH range and in electrolyte solutions Can be used as emulsifiers, wetting agents, dispersants, synthetic latex stabilizers and detergents in formulating cleaning products Typical properties Appearance:                    Colorless or yellowish liquid Active content (%):            >99% Density (g/cm3):               1.06 pH ((5.0% aqueous):        6-8 Cloud Point (1.0%, ℃):     65-70 HLB :                                 13.3-14.0 Pour point (℃):                 7 Water weight (%):              0.5 max Application -Emulsifiers -Wetting agents -Dispersants -Synthetic latex stabilizers -Detergents in formulating cleaning products Storage and handling Available in 25 kg/barrel or 200kg/barrel Store products in tightly closed original containers at 5-40℃ Shelf life: 12 months from delivery date According to non-dangerous goods transport
    read more
  • Metal rust inhibitor
    Metal rust inhibitor MC-P5200
    Feature The passivating film is colorless No chromium and heavy metal ions Pollution-free and it is environmentally friendly product Can increase the coating adhesion and anti-corrosion performance Application process Recommended dosage: 0.3~0.5% Temperature: Room temperature or medium temperature Processing time: 1-2 min Processing way: Dipping or spray pH: 8.0-10.0 The using dosage is depends on the storage time, material and other environmental indexes. Our technical engineer will recommend the optimal using dosage according to the customers’ request.  Technical process  ① Degreasing---②Water wash---③Rust remove---④Water wash---⑤Phosphate ---⑥Water wash ---⑦Rust inhibitor---⑧Post treatment Remark: Degreasing and rust removing process can be substituted for sand blasting Application -Cast iron parts, cold-rolled sheet and galvanized steel profiles surface treatment etc. Storage and handling Available in 200 kg/ barrel or 25 kg/ barrel Storage period: 12-24 months in closed containers, shady and dry place
    read more

Copyright © 2015-2017 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.Powered by dyyseo.com

top