After toning water-based plastic composite ink is used, there is often error with the standard color, which is difficult to completely avoid the problem, can only be reduced to a low limit.

Different printing ink factory use of the same part of the printing machine, different printing machine mesh mesh line number Angle has a big difference, which makes the same ink, in different printing methods have a big difference, sometimes not only the problem of dark color, but the color lightness will bring a big difference in the effect.The effect is much better than that of a printer. This type of printer can produce the same plate as a printing plant, and can design different levels of printing patterns according to the needs, which makes the printing method basically the same as that of a printing plant.

Different printing pieces have different depth, ink factory for printing pieces used depth of understanding or estimate also affects the accuracy of toning some people think that are according to the standard ink provided by the user to adjust the water-based plastic composite ink, the depth can not be considered, but in practice it is not the case.Theoretically speaking, the two inks are exactly the same, whether the plate is deep Shallow (other conditions are the same) its hue is consistent, but in the actual color, cannot allocate to draw the same ink, so often there is such a phenomenon, sometimes printed version of shallow color closer to (can meet customer requirements), but if deep version, the color is much worse, so it is very important to grasp of the version of the deep, the customer's version of how deep, it must be used Dark plates for color matching.

We are a supplier of water-based ink resins

This is our email sales@sinogracechem.com, welcome to consult.