Categories
new blog
There are many factors affecting the quality of the film, in addition to paper, ink layer, film, adhesive and so on In addition to the objective factors, it is also affected by subjective factors such as temperature, pressure, speed, and glue amount. If these factors are not handled well, various laminating quality problems will occur. There are snowflakes on the product 1.The amount of glue is to...
In the actual operation of our manufacturer, whether the laminating products can normally complete the factory and meet the requirements of customers, in addition to the quality of the laminating glue itself, it is also related to the supporting factors such as paper, film, equipment accuracy, environment, and operating experience in the composite process. Often in some small details, it will caus...
Whether the water-based film adhesive meets the quality requirements of composite products, in addition to the quality of the glue itself, but also related to the paper, film, equipment accuracy, operating experience and other supporting factors in the film coating process, after long-term practice, we summarized the common problems in the application of water-based film adhesive, and put forward ...
Common problem Cause Solution The middle part of the compound bubbles Add dry oil when brushing Dry and then recombine The amount of glue is too small Increase glue Film or print surface contamination or excessive dusting Dedusting The overflow on the surface of the rubber roller is not removed, causing the mucous membrane to empty Cleaning glue roller The pressure is too small, and the ...
As a kind of widely used adhesive, coated adhesive has a variety of processes. Here are some of the common processes used: 1. Hot melt coating: hot melt coating is to place a layer of film on the surface of the print, and then through hot pressing the film and the print together.In this process, the laminating glue is heated to turn it into a liquid, which then forms a uniform coating between the ...
Brand :Sinograce Type: Water base adhesive Appearance:Milky white emulsion with blue light Performance and use:This product is suitable for the coating of BOPP film, PET film and printed color paper (dry coating process). High bonding q degree, large tension compound drying speed, good parallel flow; For gold and silver cardboard, single powder paper bonding q degree, tension q, to avoid the...
First, the choice of self-adhesive printing raw materials When selecting raw materials, we must choose high-quality self-adhesive materials with qualified physical and chemical indexes, rather than products with expired or unstable physical and chemical indexes. Although the latter price is low, but due to the unstable quality of such materials, large consumption in each process, and even lead to ...
The performance requirements of water-based varnish for printing paper glazing are as follows: 1.The film has good environmental resistance. Some of the printed matter after glazing is used to make all kinds of packaging cartons, in order to be able to play a good protective effect on the packaged products, the environmental resistance of the glazing film layer must be better. For example, the pac...
2
2
adminpagesCopyright © 2015-2024 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top