Categories
First, the choice of self-adhesive printing raw materials When selecting raw materials, we must choose high-quality self-adhesive materials with qualified physical and chemical indexes, rather than products with expired or unstable physical and chemical indexes. Although the latter price is low, but due to the unstable quality of such materials, large consumption in each process, and even lead to ...
That is, metal foil printing adhesive, commonly known as hot stamping adhesive, is a special performance adhesive, but also the key to the success of metal foil printing. product presentation Hot stamping adhesive consists of a special adhesive composed of a suitable hot melt adhesive and a bonding resin, which is composed of two points: 1.There are polyamide series, polyester series, polyethylene...
An important link in the production of color printing packaging is after color printing or paper-plastic film decoration, now the means of packaging products mainly rely on film or glazing, advertising instructions, books and notebook covers, commodity packaging and signs are all so. In terms of surface coating or glazing, there are now a variety of decorative methods to choose from, such as: (1)C...
Laminating glue is currently a kind of strong glue widely used in the market, so what is the application processing process of laminating glue? The application processing technology of laminating glue is as follows: 1, the composite method is dry composite, that is, the coating machine should use a dry composite machine with curing furnace and composite roller heating. 2, curing furnace ambient te...
1.There are many formulations of coated glue, and different formulations need to be determined according to the specific use. It generally includes basic glue, thickener, curing agent, auxiliaries and other ingredients. 2.Basic glue is the most important component of laminating glue, it can be selected according to different use requirements of different types, such as water-based, oily, dilu...
The transparency of composite film is very high, but in the composite processing of plastic film, the composite film often has problems such as insufficient transparency. So, what is the reason for affecting the transparency of the composite film? This article analyzes one by one for reference. Improper selection of adhesives: Such as the color of the adhesive itself is dark or the fluid...
"If there are small bubbles in the complex, opaque and foggy, it will not only affect the appearance quality, but also affect the peeling strength of the complex, reducing it, which is a very bad phenomenon." 1.The surface tension of the base film is too small, the infiltration is poor, the glue is not uniform, and the space without glue is empty and bubbles are generated. The solution is to use a...
Different processing methods will cause different fault manifestations, the following we mainly analyze the causes of paper thermit sealing delamination phenomenon under the gravure and solvent-free composite processing methods. The YBB paper aluminum-plastic composite film standard does not specify the composite strength index of the paper aluminum layer in the paper aluminum-plastic composite fi...
Copyright © 2015-2024 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top