Categories
Types and characteristics of main extinction agents Types Features Organic matting agent (synthetic wax) It can not only extinction, but also increase the surface smoothness, enhanced hand feeling and anti-settling property of the coating film. However, such matting agents often affect the transparency of the coating film and even affect the interlayer adhesion of the coating film. Inorganic matti...
Water-based coating formulation design system - preservative Water-based wood coatings are water-based systems that are easier to bring into bacteria during production and are more susceptible to microbial degradation during storage. Therefore, the type and amount of preservatives should be properly added during formulation to prevent system and coating corruption.From the perspective of environme...
Waterborne paint formulation design system - pH regulator Waterborne wood coatings may also need to adjust the pH when necessary.Most emulsions or aqueous dispersions have been adjusted to a pH of 8 to 9 when they are produced, eliminating the need for pH adjusters when making paint.If the pH value is different, add 0.05% to 0.1% of the pH adjuster during the paint making process, and adjust the p...
To master waterborne wood coatings and coatings, you must be familiar with the characteristics of wood. In this way, we can find the root cause of the problem in the painting process and make the necessary preventive and treatment measures. Wood is a natural fiber material, seen from the cross section of the trunk, it is a uniform material composed of layers of different materials, with many textu...
Due to the chemical composition of the wood and the particularity of the wood fiber, if it is not handled properly, the water-based paint film will be damaged. Wood is composed of cellulose and a small amount of gum, resin (rosin), pigment, tannin and the like. Although the amount of gum, resin, pigment, tannin, etc. is small, it has a large negative impact on the properties of the coating (mainly...
Wood coating process 1.There are many large holes in the hard wood, putty or hole adding agent to flatten; 2.Apply closing primer after hole filling； 3.If you need to deepen the surface texture of the wood and highlight the wood grain, you can apply the closed primer and apply the water color； 4.After conditioning the wood grain, apply two closed primer； 5.Finish with top coat. Sinograce Chemical ...
The steel is subjected to different degrees of corrosion conditions in different operating environments. According to the corrosion conditions, the environmental conditions used by the steel are divided into four grades: Steel use environment and corrosion conditions Steel use environment and corrosion conditions Definition Performance Requirements Coating Effect Harsh conditions Products used in ...
Plastics are classified into two types: thermosetting and thermoplastic.Among them, thermosetting plastics have high cross-linking density, good solvent resistance and heat resistance, relatively high surface polarity, and wide range of coatings available.For example, unsaturated polyester is called polyester fiberglass. The texture is hard and polar, and there are many coatings that can be used. ...
From the viewpoints of molecular structure, molecular polarity and molecular interaction force, the adhesion of the paint film results from the polar group orientation of the polymer molecules in the coating, and its polar group with the polar molecules on the surface of the coated object. The mutual attraction between each other.Only when the polar phase of the two is adapted to obtain a good adh...
Cohesion and thermal expansion coefficient of paint film The force caused by the cohesion of molecules of the same substance is called cohesion.The more cohesive the coating, the worse the adhesion.In the drying process of paint, with the increase of solvent volatilization and crosslinking degree, the cohesion between film forming material molecules increases, the film produces shrinkage phenomeno...
The adhesion of the paint film is caused by the mutual attraction between the paint and the polar groups on the surface of the coated substrate, and the mutual attraction between the polar groups is based on the premise that the paint is well wetted on the surface of the coated substrate.Since the wet condition of the coating on the surface of the coated substrate depends on the surface tension of...
Sinograce Chemical - Jingangtai rafting trip On August 17th, Sinograce Chemical Marketing Center carried out the second quarter group building activities of the Rapids Warriors, blue sky and white clouds, green mountains and green waters, riding a rubber boat, leaping in the cool water, Sometimes light as a swallow, Now and then it gallops like a tiger, the event The thrills not only make the...
Adding certain kinds and dosages of substrate wetting agent and adhesion promoter to the transparent base formulation helps to improve the adhesion of the paint film; the type and quality of the color paste are not only related to the phase of the color paste and the transparent base. Capacity also has a certain influence on the adhesion of the paint film. The thickness of the paint film, the dryi...
Water - based acrylic emulsion formulation needs to be considered: water - based acrylic resin composition The choice of emulsion raw materials is the most important decision for engineers when formulating aqueous paint formulations.The main properties of the coating are determined by the resin.A wide variety of water-based acrylate emulsions, including polystyrene-acrylate emulsions, are on the m...
The internal structure of waterborne acrylic emulsion particles will affect several aspects of waterborne paint formulations.According to the order in which the effects are affected, the phase structure will first affect the selection and addition of the filming aid.Different phases have different hydrophilic/lipophilic characteristics, and the oleophilic properties of various coalescents are diff...
How to deal with the surface of water-based anti-rust paint before painting As the saying goes, "seven-point paint three-point paint." The correct handling of the substrate can have a major impact on the performance of the coating. Waterborne anti-corrosive paint is no exception. During the processing, transportation and storage of the workpiece, the surface often has the moldi...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2024 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية