Categories
Introduction Of Electrostatic Flocking Electrostatic flocking is widely used and popular in industrially developed countries, such as the United States, Italy, Germany and Japan, because of its unique decorative effect of suede and embroidery, as well as its simple process, low cost and strong adaptability.In recent years, a variety of electrostatic flocking products have also been developed...
Water-based adhesives have various kinds and different properties, which can adapt to the trend of environmental protection. The important properties of water-based adhesive are: solid content (non-volatile mass percentage), viscosity, emulsifier or surfactant total agent dosage, surface tension, pH value, particle size and distribution, film forming temperature, mechanical stability, etc.Com...
All staff of Sinograc Chemical went rafting in Huoshan. We had a great time and had a happy holiday. I hope everyone was as happy as us.
Compared with traditional glue, water-based coated glue is made of imported raw materials, with high solid content, low viscosity, good process applicability, strong adhesive force, non-toxic and other advantages are suitable for aluminum foil (OPA), pretreated polyethylene (HDPE,LDPE), polypropylene (OPP, CPP), polyester (PET), polyamide (PA,ONY) film, A two-component solvent-based polyurethane a...
Pressure sensitive adhesive in addition to the adhesive, but also to add adhesive and other auxiliary substances. 1.The adhesive of the pressure sensitive adhesive has rubber or synthetic resin and other materials, its role is to give the adhesive layer enough cohesion strength and adhesion, the dosage is 30%-50%. 2.Viscosifier. Viscosifier rosin and its derivatives, petroleum resin, etc., it...
Now, people's environmental awareness is getting stronger and stronger, and many glue manufacturers are also seeking to transform themselves. Some water-based glue or oil-based glue are produced. Today, we will take water-based glue and oil-based glue as an example to talk about the difference between them. First, the difference between water-based glue and oily glue The first difference is that t...
After the ink is transferred to the printing surface by the blanket at a certain printing speed and under a certain printing pressure, the fixation and drying speed of the ink film, as well as the color, gloss, fastness and resistance after film formation, etc. ensure the printing effect, which are collectively referred to as the printing quality suitability of the ink. It mainly includes color, p...
Water-based single-component protective film adhesive is an environmentally friendly adhesive prepared by using natural polymer or synthetic polymer as adhesive and water as solvent or dispersant instead of toxic organic solvents that pollute the environment.Existing water-based adhesives are not 100% solvent-free and may contain limited volatile organic compounds as additives to their water-based...
Sixteen common types of self-adhesive labels This paper introduces sixteen types of self-adhesive labels commonly seen in daily life. The specific types of self-adhesive labels are as follows: 1. Press smooth writing paper and offset paper labels Multi-purpose label paper for information labels, bar code printing labels, especially suitable for high speed laser printing, also suitable fo...
Water-based glue, when the autumn and winter season, special attention should be paid to anti-freezing treatment, according to different temperatures, the implementation of different solutions. Cautions (1) Pay attention to warmth and anti-freezing when transporting glue: when transporting below 0℃, pay attention to the warmth of the vehicle, and transport below -5℃ is prohibited; (2) Ke...
Protective film glue transfer, there are a variety of factors, I believe that in the work, many teachers will also encounter a similar situation.The phenomenon of the so-called glue transfer is uneven coating or in the process of transportation, the glue shift remains on the surface of the profile, commonly known as glue transfer. Protective film glue transfer can be divided into the followin...
Hot melt adhesive (English name: HotGlue) is a kind of plastic adhesive, in a certain temperature range, its physical state changes with the change of temperature, but the chemical properties remain the same, its non-toxic and tasteless, belongs to environmental protection chemical products.Because the product itself is solid, easy to package, transport, storage, no solvent, no pollution, non-toxi...
The relationship between the index of laminating glue and common problems I. Viscosity Viscosity is the internal friction of the liquid, and colloquially, the thin consistency of the glue. The viscosity of the glue does not indicate the bonding performance of the glue, in other words, the thicker the glue is, the better the performance is. The viscosity can be adjusted within a cert...
Bond strength and deinking Bond strength is one of the most important indexes of glue properties. Bond strength refers to the amount of force required when the film and paper are stripped, and this index is often combined with the deinking effect. We first need to understand the principle and structure of paper-plastic composite. If you want to enhance the bonding force, you must consider the...
During December 10, 2022, customers from Russia have come to visit our company. Foreign trade manager and relevant personnel warmly welcome our customers, and introduced our product which they are interested in detailedly. Water based glue
Existing water-based adhesives are not 100% solvent-free and may contain limited volatile organic compounds as additives to their water-based media in order to control viscosity or fluidity.The advantages are mainly non-toxic, no pollution, no combustion, safe use, easy to achieve clean production technology, etc., disadvantages include slow drying speed, poor water resistance, poor fros...
Copyright © 2015-2024 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top