Description This product is suitable for substrates such as kraft paper, aluminum foil, glass fiber, cotton paper, BOPP, PET, PP, cloth, etc.Suitable for high weight, high stripping force, high adhesion; Coating thickness of some substrates, such as double-sided tape, cloth base, etc. The adhesive force is adjustable from 1200g to 1800g/25mm, and the long-term temperature resistance can reach above 80°C.

Description This product is suitable for substrates such as MOPP, OPP, PET, PP laminated paper, PP, etc., and can be used as an adhesive for textured paper and laminated paper. The adhesive force is adjustable from 200g to 400g/25mm, and the long-term temperature resistance can reach above 80°C.

1. Application This adhesive is suitable for substrates such as BOPP, PET, PP, coated paper, and pearlescent film. Adhesion 400g ~700g/25mm(adjustable). The long-term temperature resistance can reach above 80°C. It can be labeled at a low temperature of minus 20°C. Composition Chemical Name UV light curing hot melt pressure sensitive adhesive Type (single product or mixture) Mixture Chemical name of main components Content(% Acrylic ester copolymer  ≥99% Ethyl acetate  ≤1% 2. Performance Composition of test piece       -----Substrate 50μmPET film -----Adhesive 25μm dry ----- Release paper, double-sided silicon release paper Curing condition Use UVC band to make it cure Mechanism of  UV curing The photoinitiator in the UV glue generates free radicals to abstract hydrogen under the UVC band to form crosslinks. Physical and chemical indicators   3. Precautions during coating 1.This adhesive cannot be mixed with other adhesives. Clean the container, glue pump, rubber hose and coating head before use. 2.This product is a UV-curable hot-melt pressure-sensitive adhesive, which is solid at room temperature and should be protected from light during transportation and storage. 3.Gluing thickness: coating according to customer needs. 4.This adhesive can be used as a removable label adhesive, and can be applied with low weight pressure sensitive adhesive. 5.Adjust the energy according to the level of adhesion requirements. The specific curing energy can be referenced according to the following data.   Energy mj/cm2 180°Peeling force /N Annular initial adhesion /N Holiding power/25℃/h Thickness/μm 25 6 10 ≥24 25 Remark:The test substrate is 50 μm PET film, and the coating method is direct coating; This data is for reference only, and the specific data shall be determined according to customer needs. The curing of UV hot melt adhesive is closely related to the energy of UV lamp and the speed of coating. The substrate used for coating is different, and the energy and speed of the coating need to be adjusted accordingly. 4.7  The platen gluer is heated to about 150±10°C and put into the glue box, ready for coating. 4.8  Coating head temperature requirements: adjust according to equipment and process conditions. 4.9  Coating speed: adjusted according to the thickness of the glue and the energy of the UV lamp.   4.Ripening of tape In order to make the performance of the adhesive reach a stable value, and at the same time make the cohesive strength of the glue close to the maximum value, the coated tape must be stored for 24 hours before testing, processing or use. 5.Adhesive Storage The validity period of the adhesive is six months, and the storage temperature is 25±5°C, stored in a ventilated, dry and cool place, and protected from light.

1. Application This product is suitable for substrates such as MOPP, OPP, PET, PP synthetic paper, PP, etc. The adhesive force is adjustable from 200g to 400g/25mm, and the long-term temperature resistance can reach over 80 ℃ 2. Performance This product is suitable for substrates such as MOPP, OPP, PET, PP synthetic paper, PP, etc. It can be used as an adhesive for protective films and can be used for the coating of low weight pressure sensitive adhesives

This product with base material such as cement, ceramic tile, marble with strong bonding strength.

This product with base material such as cement, ceramic tile, marble with strong bonding strength.

The tackifier emulsion provided by Sinograce Chemical has a very narrow particle size distribution interval and a small average particle size, low foam, excellent storage and mechanical stability. It is used to improve the initial adhesion / peel strength, holding power properties of water-based glue/adhesive

SA-232L is an adhesive specially designed for reverse and various gravure coaters at higher converting speeds, for the production of general purpose paper labels or other pressure sensitive articles.