WET-245 is a high wetting agent modified by polyether siloxane copolymer. It has excellent substrate wetting, anti-crater effect and flow promotion performances. It is widely used in all kinds of water based and solvent based system.

WET-267 is a silicone wetting agent with low viscosity and low surface tension. Imparts good spreading and wetting properties. Improves the wetting of water printing inks on high slip PE, PP and PET used in packaging.

WET-270 is a low foaming silicone wetting agent with low viscosity and low surface tension. Imparts good spreading and wetting properties. Excellent anti-crater effect with flow promotion in water based, solvent based and radiation-curing formulations.

WET-608 is a superspreading surfactant/wetting agent based on a trisiloxane ethoxylate. It lowers the surface tension of spray solutions, beyond that which is achievable with conventional adjuvants.

WET-618 is a high superspreading surfactant modified by trisiloxane ethoxylate with super low surface tension. It lowers the surface tension of spray solutions, beyond that which is achievable with conventional adjuvants.

DF-7133 is a kind of silicone defoam emulsion. It is specially developed for oil field and gas plant. It helps preserve foam control under the severe conditions of a dehydrating unit.

OP-10 is a water-soluble nonionic surfactant composed of a 10-mole ethylene oxide adduct of octylphenol.

Vinyltri(2-methoxyethoxy)silane is is a vinyl-functional coupling agent that promotes adhesion among unsaturated, polyester-type resins or crosslinked polyethylene resins orelastomers and inorganic substrates, including fiber glass, silica, silicates and many metal oxides. It improves bond of glass filament, adhesion of silcone and electrical properties.

Type Phenyltriethoxysilane Typical properties Appearance: colorless transparent liquid CAS: 78-08-0 Molecular formula: CH2 = CHSi (OCH2CH3) 3 Dilution: soluble in organic solvents, insoluble in water PH = 7, the acidic water-soluble PH3-3.5 Application -Filler treatment :The coupling agent for improving the affinity of glass fibers, inorganic fillers and vinyl reactive resin between the reinforced polyester resin -Engineering Plastics: A-151 silane coupling agent for a variety of complex shapes, all density polyethylene and copolymers, for large processing latitude, filled composite materials, has a high temperature, excellent the resistance to stress cracking resistance, memory, wear resistance and impact resistance -Reforming Resin: A-151 coupling agent and the role of both the cross-linking agent, suitable polymers include polyethylene, polypropylene, unsaturated polyester -Sealants: A-151 silane coupling agent used in the preparation of electronic components plastic sealant material. Polybutadiene plastic material, the use of the product treated filler quartz powder, to improve the surface polybutadiene resin and quartz powder three-way combination of reinforced plastics density, thereby improving the moisture resistance of the plastic material -Moisture treatment: Silane coupling agent A-151 as an electronic component surface moisture treatment, available in garden trimming sheet type ceramic capacitor dielectric anti-high-pressure composite dielectric capacitor surface moisture treatment to improve moisture resistance and surface finish of products, improve product qualified rate Storage and handling Available in 25 kg/drum Store products in tightly closed original containers at 5-40℃ Shelf life: 12 months from delivery date According to non-dangerous goods transport

The Organosilicon Type Leveling Agent  Type HS code Appearance Active Ingredient Suggested Add Amount Ingredient Silica content Applications and Characteristics waterbase system solventbase system UV system SG-306 3402900090 water-write transparency 15% 0.1-1% polyether modified silicone oil solution medium Good compatibility and hand-feeling property great surface tension reducing property. It has excellent wet ability to the substrate layer and can improve smooth and anti-scrub of the film. Good capacity of orientation to the matting agent and can be used in baking varnish system under 150℃.   √   SG-3310   water-write transparency 25% 0.05-1% polyester modified silicone oil solution medium Excellent high thermal resist and can be fit for bake temp uder 300℃, suit for bake varnish system,good compatibility,levelling ability and hand feeling, strong shrinkage resist, suit for industry bake varnish   √ √ SG-314N   lemon-yellow viscous fluid  100% 0.1-1% polyether modified silicone oil low 1.Epoxy,UPE, UV etc system. 2.Excellent levelling property and good defoam ability. 3.Be well suitable for epoxy floor coat system.   √ √ SG-319   lemon-yellow lemon-green water-write transparency viscous fluid 100% 0.1-1% polyether modified silicone oil low 1.good compatibility and levelling propety. 2.be suitable for kinds of system under normal temp. 3.can be used bake varnish system under 150℃. √ √ √ SG-320   lemon-yellow viscous fluid 50% 0.1-1% polyether modified silicone oil low 1.excellent levelling property. 2.good defoam ability. 3.suitable for medium and low polar system.   √ √ SG-323   lemon-yellow viscous fluid 100% 0.1-1% aralkyl modified silicone oil  high 1.excellent levelling ability with good defoam ability. 2.Can increase the smooth ability and anti scrub ability. 3.Can increase the capacity of orientation of the matting agent and metal pigment. 4.Strong  high thermal resist and can be fit for bake temp uder 300℃.  5.Be suitable for all types of solventbase system.   √ √ SG-325   lemon-yellow viscous fluid 100% 0.1-1% modified polysiloxane medium 1.Suitable for all types of solventbase system especially for artificial leather system. 2.good levelling ability.   √ √ SG-326   lemon-yellow viscous fluid 100% 0.1-1% polyether modified silicone oil low 1.Excellent compatibility and levelling propety 2.Can get mirror face effect nearly. 3.Be suitable for both solventbase ans waterbase system. √ √ √ SG-331   lemon-yellow viscous fluid 100% 0.1-1% polyether modified silicone oil Medium 1.good compatibility with great levelling ability. 2.Specially suitable for industry paint system without effecting recoat ability. 3.Can be also used in bake varnish under 150 C. √ √ √ SG-332   lemon-yellow viscous fluid 100% 0.1-1% polyether modified silicone oil Medium 1.Excellent wetability to the substrate. 2.good leveling ability and great hand feeling. 3.Strong shrinkage resist ability with no effect recoat. 4.Specially suitable for UV ink and coat system, also can be used in bake varnish under 150 C. √ √ √ SG-333   lemon-yellow viscous fluid 100% 0.1-1% polyether modified silicone oil Medium 1.Can be used in solventbase and waterbase system. 2.Strong combination property with high compability, levelling ability, hand feeling property and the capacity of orientation of the matting agent. 3.Strong shrinkage resist ability withour effecting recoat. 4.Also can be used in bake varnish system under 150C.  √ √ √ SG-333A   lemon-yellow viscous fluid 100% 0.1-1% polyether modified silicone oil Medium 1.Can be used in solventbase and waterbase system. 2.Strong combination property with high compability, levelling ability, hand feeling property. 3.Strong shrinkage resist ability withour effecting recoat. 4.Also can be used in bake varnish system under 150C.  √ √ √ SG-334   lemon-yellow viscous fluid 100% 0.1-1% polyether modified silicone oil Medium sharp high 1.Best hand-feeling product used in high gloss system. 2.Strong combination property with high compability, levelling ability, hand feeling property . 3.Strong shrinkage resist ability withour effecting recoat. 4.Also can be used in bake varnish system under 150C.  √ √ √ SG-335   water-write transparency 100% 0.1-1% modified polysiloxane High 1.Very strong shrinkage resist ability. 2.Good levelling ability with defoam capacity.   √ √ SG-3351   lemon-yellow viscous fluid 100% 0.1-1% polyether modified silicone oil Medium sharp high 1.Specially for UV system and also can be used in epoxy,UPE and waterbase system, suitable very well for UV paper coating. 2.Srong wearing resistance and hand-feeling sticky resist property. 3.Strong tape-tearing resist ability.  √ √ √ SG-351N   semi-transparent paste 80% 0.1-1% high molecular weight siloxane dispersion High 1.high molecular weight siloxane dispersion. 2.can increase the wearin...

The Wetting agent for Base Materials Type HS code Appearance Active Ingredient Suggested Add Amount Solvent Ingredient Static surface tension Dynamic surface tension Applications and Characteristics waterbase system solventbase system UV system SG-304 3402900090 Water white solution 50% 0.1-1% dipropylene glycol monomethyl ether The mixture of non-siliceous surface active agent 33 38 1.Can reduce dynamic surface tension largely. 2.Excellent defoam ability, wetting ability and anti-shrinkage property. 3.Good levelling property. √     SG-342   lemon-yellow viscous fluid 100% 0.1-1% … The mixture of non-siliceous surface active agent 33 38 1.Can reduce dynamic surface tension largely. 2.Excellent defoam ability, wetting ability and anti-shrinkage property. 3.Good levelling property. √ √ √ SG-343   lemon-yellow viscous fluid 100% 0.1-1% … Modified organofluorine compound 18 45 1.Suitable for waterbase,solventbase and UV system. 2.High cloud point. 3.Excellent wetting ability and anti-shrinkage property. 4.Good water solubility and levelling property. √ √ √ SG-344   lemon-yellow viscous fluid 100% 0.1-1% … The mixture of non-siliceous surface active agent 33 38 1.Can reduce dynamic surface tension largely. 2.Excellent wetting ability and anti-shrinkage property. 3.Good levelling property. √     SG-345   lemon-yellow viscous fluid 100% 0.1-1% … polyether modified silicone oil 22 48 1.Suitable for waterbase,solventbase and UV system.2.High cloud point. 3.Excellent wetting ability and anti-shrinkage property. 4.Good water solubility and levelling property. 5.Using under PH 6-8 √ √ √ SG-346   lemon-yellow transparent solution 50% 0.1-1% dipropylene glycol monomethyl ether polyether modified silicone oil solution 23 48 1.Suitable for waterbase,solventbase and UV system. 2.Can reduce surface tension largely. 3.Excellent wetting ability and anti-shrinkage property. 4.Can be used in more PH range. √ √ √ SG-347   lemon-yellow viscous fluid 100% 0.1-1% … non-ionic surface active agent compound 33 38 1.Excellent dynamic surface activity and strong hydrophilic property .2.Excellent wetting ability and anti-shrinkage property. 3.Good levelling property. √     SG-348   lemon-yellow transparent fluid 100% 0.1-1% … polyether modified silicone oil 23 48 1.Suitable for waterbase,solventbase and UV system 2.Excellent fast-levelling effect. 3.Can reduce surface tension largely. 4.Excellent wetting ability and anti-shrinkage property. 5.Good levelling property and hydrolysis resistance. 6.Can be used in more PH range. √ √ √ SG-349   lemon-yellow transparent fluid 100% 0.1-1% … polyether modified silicone oil 23 48 1.Suitable for waterbase,solventbase and UV system. 2.Excellent fast-levelling effect. 3.Can reduce surface tension largely. 4.Excellent wetting ability and anti-shrinkage property. 5.Good levelling property and hydrolysis resistanc. 6.Can be used in more PH range. √ √ √ SG-360   lemon-yellow viscous fluid 100% 0.1-1% … polyether modified silicone oil 22 52 1.Suitable for waterbase,solventbase and UV system. 2.Excellent fast-levelling effect. 3.Can reduce surface tension largely. 4.Excellent wetting ability and anti-shrinkage property. 5.Good levelling property √ √ √ SG-364   lemon-yellow viscous fluid 100% 0.1-1% … non-ionic surface active agent compound 26 30 1.Excellent dynamic surface activity and strong hydrophilic property. 2.Excellent wetting ability and anti-shrinkage property.  3.Good levelling property. √     SG-375   lemon-yellow viscous fluid 100% 0.1-1% water non-ionic surface active agent compound 32 51 1.Excellent dynamic surface activity 2.Excellent wetting ability and anti-shrinkage property. 3.Good levelling property. √     SG-378   lemon-yellow Transparent fluid 100% 0.1-1% … polyether modified silicone oil 21.5 48 1.Suitable for waterbase,solventbase and UV system. 2.Can reduce surface tension largely. 3.Excellent wetting ability and anti-shrinkage property. 4.Good levelling property and can be used under PH 6-8. √ √ √ SG-379   lemon-yellow viscous fluid 100% 0.1-1% … polyether modified silicone oil 21.5 48 1.Suitable for waterbase,solventbase and UV system. 2.Can reduce surface tension largely. 3.Excellent wetting ability and anti-shrinkage property. 4.Good levelling property and can be used under PH 6-8. √ √ √

The Dispersant Type HS code Appearance Active Ingredient Suggested Add Amount Solvent Ingredient Applications and Characteristics waterbase system solventbase system UV system SG-601 3402900090 Yellowish transparent solution 50% inorganic pigment:1-2% organic pigment:10-30% Mixed aromatics The compound solution of being with pigment groups 1.High cost performance and suitable for dispersing inorganic pigments and filliers. 2.Reduce the viscosity of the vehicle apparently. 3.Increase the gloss,hiding power and wetting property to the base materials.   √   SG-604   Yellowish transparent solution 50% inorganic pigment:0.5-2% organic pigment:10-30%            Mixed aromatics The compound solution of being with pigment groups 1.General use  and can improve wetting property of various pigments largely. 2.Shorten dispersing time of grinding. 3.Excellent anti-flooding and anti-floating ability for double color system of organic and inorganic pigments. 4.Don't contain organosilicon.   √   SG-604S   Yellowish transparent solution 50% inorganic pigment:0.5-2% organic pigment:10-30%          Mixed aromatics The compound solution of being with pigment groups 1.General use. 2.Contain organosilicon ingredients and can improve wetting property of various pigments. 3.Excellent anti-flooding and anti-floating ability for double color system of organic and inorganic pigments. 4.Shorten dispersing time of grinding.   √   SG-605S   Yellowish transparent solution 50% inorganic pigment:0.5-2% organic pigment:10-30%       Mixed aromatics The mixture of the compound solution of being with pigment groups and organosilicone 1.General use. 2.Contain organosilicon ingredients and can improve wetting property of various pigments. 3.Shorten dispersing time of grinding. 4.The molecular weight is bigger than 504S. 5.Excellent anti-flooding and anti-floating ability for double color system of organic and inorganic pigments.    √   SG-613   lemon-yellow viscous fluid 50% inorganic pigment:5-10% organic pigment:10-30% carbon black:20-50% Mixed aromatics high molecular compound of amidic-salt etc with pigment groups  1.Suitable for solventbase  system. 2.General use. 3.High dispersing efficiency. 4.Can increase the gloss and reduce grinding viscosity. 5.Especially suitable for dispersing carbon black in artificial leather pigment paste system.   √   SG-641   Yellowish viscous fluid 100% inorganic pigment:1-2% bentonite:5-20%    … The compound solution of being with pigment groups 1.High cost performance and suitable for dispersing inorganic pigments and filliers. 2.Reduce the viscosity of the vehicle apparently. 3.Increase the gloss,hiding power and wetting property to the base materials.   √ √ SG-644   Brown transparent solution 50% inorganic pigment:1-5% organic pigment:10-30%    TiO2: 5-6% Carbob black:20-60% Mixed aromatics high molecular compound of  being with pigment groups 1.General use for pigments. 2.High dispersing efficiency. 3.Can increase the gloss and reduce grinding viscosity.   √   SG-696   lemon-yellow viscous fluid 50% TiO2: 2-4% Other inorganic pigment:1-5%   Mixed aromatics high molecular compound of  being with pigment groups 1.Suitable for dispersing inorganic pigments especially for titanium dioxide. 2.Can reduce grinding viscosity largely and can increase the gloss.  3.Excellent storage stability. 4.Don't contain nonylphenol.   √ √ SG-6011   lemon-yellow transparent solution 50% TiO2: 2-4% Other inorganic pigment:1-5%   Mixed aromatics high molecular compound of being with pigment groups 1.Suitable for dispersing inorganic pigments especially for titanium dioxide. 2.Can reduce grinding viscosity largely and can increase the gloss.  3.Excellent storage stability   √ √ SG-6041   Yellowish transparent solution 50% inorganic pigment:1-5% organic pigment:20-40% Carbob black:30-100% Mixed dibasic ester high molecular compound of  being with pigment groups 1.General use. 2.Extensive compatibility to various resins. 3.Strong dispersing ability to organic and inorganic pigments. 4.Excellent storage stability of grinded color paste. 5.It is not easy for grinding sole color paste to float when toning. 6.Excellent storage stability.   √ √ SG-6061   Yellowish transparent solution 30% inorganic pigment:1-5% organic pigment:20-40% Carbob black:30-100% Mixed dibasic ester high molecular compound of being with pigment groups 1.General use. 2.Extensive compatibility to various resins. 3.Strong dispersing ability to organic pigments. 4.Excellent storage stability of grinded color paste.   √ √ SG-6063   Yellowish transparent solution 45% inorganic pigment:1-5% organic pigment:20-40% Carbob black:30-100% Mixed dibasic ester high molecular c...

Wet-2412 is a wetting agent,widely used for water-based pressure adhesive system

Wet-2413 is a wetting agent, widely used for water-based pressure adhesive

Wet-2414 is a wetting agent,widely used for water-based pressure adhesive

Wet-2416 is a wetting agent, widely used for water-based pressure adhesive