• 2024-12-27 17:59:28
• admin

As for the performance difference between water-based acrylic acid and water-based polyurethane, it can be briefly analyzed from the following aspects: 1.Chemical structure: Waterborne acrylic resin is mainly composed of acrylic monomer, while waterborne polyurethane resin is composed of isocyanate monomer and polyether or polyester polymer. 2.Performance characteristics: Water-based acrylic resin...

• polyurethane waterproof paint
• waterborne polyurethane
• waterborne acrylic

• 2025-01-10 17:36:18
• admin

(1) The use of hydrosol Hydrosol is a polymeric dispersion of very small particles, which has the characteristics of both emulsion system and solution system, and can effectively improve water resistance (2) Reduce the amount of emulsifier Although emulsifier plays an important role in the formation of micelles in polymerization and the stability of the polymerization emulsion, it is als...

• tackifier chemical
• tackifier for water based adhesive
• tackifier resin adhesive

• 2024-12-25 17:52:42
• admin

In the formulation of water-based paint, the choice of emulsion raw material is the most important decision for the engineer. The main properties of the paint are determined by the resin. There are a wide variety of water-based acrylate emulsions, including polystyrene-acrylate emulsions, which are mixed in the market. The different composition of water-based acrylate resin has great influence on ...

• pure acrylic emulsion
• self crosslinking acrylic emulsions
• acrylic emulsion binder

• 2024-12-23 17:06:39
• admin

The application of water-based ink coating is very wide, mainly reflected in the following aspects: 1.Printing industry Water-based inks can be used to print a variety of paper and packaging materials, such as books, newspapers, magazines, posters, gift boxes, etc. All kinds of paper such as kraft paper, coated paper, thermal paper, Glasin paper, release paper and corrugated board can be...

• polyurethane resin for printing ink
• acrylic emulsion for flexo ink
• gravure printing ink resin

• 2024-12-21 16:17:28
• admin

01 Conditions for film formation Stowing operation The water evaporates, and the particles are close to each other to achieve a dense charging state Fusion process The surface layer of the particles is destroyed, and the particles are in contact with each other. Diffusion process The molecular chains between the dispersion particles are diffused with each other to form a homogeneous film with cert...

• polyurethane waterproof coating
• polyurethane resin
• polyurethane coating

• 2024-12-17 16:39:26
• admin

Glove PU coating refers to coating the outer layer of gloves with a layer of polyurethane (PU) material. This coating has a variety of functions, mainly including: Oil and chemical resistance: makes the gloves suitable for work environments where oils and chemicals need to be handled. Anti-slip and wear resistance: Enhances the stability of the gloves in wet or greasy environments, reduces the ris...

• foam latex glove palm coating
• gloves coating liquid
• safety gloves coating water based polyurethane dispersion

• 2024-12-13 17:30:02
• admin

SA-210 Styrene Acrylic emulsion for internal and external walls has the characteristics of fast drying speed, good film formation, high bond strength, good initial water resistance, low water absorption, and scrubbing resistance. Application The products are suitable for the interior wall decoration of villas, apartments, office buildings, buildings and other files. Typical properti...

• Styrene Acrylic emulsion
• styrene acrylic copolymer

• 2024-12-12 17:28:07
• admin

This product uses butadiene, Acrylonitrile as the main raw materials, through emulsion polymerization of anionic polymer dispersion, can be used to produce disposable medical examination gloves, with excellent elongation and tensile strength The product is an environmentally friendly product, free of formaldehyde, APEO, NPEO and other harmful substances, and has excellent elongation, tensile stren...

• Nitrile latex
• acrylonitrile butadiene rubber latex
• NBRL

• 2024-12-11 17:38:08
• admin

Styrene-butadiene rubber latex is a kind of copolymer emulsion obtained by emulsion polymerization with butadiene and styrene as monomers or main monomers. Ordinary styrene butadiene latex Carboxylic butadiene-styrene latex Bufedipine latex There are many varieties of styrene-butadiene latex, according to the different types of raw materials can be divided into ordinary styrene-butadiene late...

• Styrene-butadiene rubber
• Carboxylic butadiene-styrene latex
• Styrene-butadiene rubber latex

• 2024-12-07 16:19:24
• admin

Compared with natural latex, the commonality of synthetic latex lies in its excellent storage stability, mechanical stability, chemical stability and freeze-thaw stability during storage and application. The characteristics of different kinds of synthetic latex are as follows: Styrene-butadiene latex Butadiene series latex is a copolymer latex synthesized mainly by butadiene and styrene monomer. B...

• styrene butadiene latex
• butadiene latex
• synthetic latex