Categories
new blog
The main difference is that the nature is different, the production process is different, and the characteristics are different, as follows: First, the nature is different 1.Flexo printing Flexo printing is a direct printing method known as flexo printing because of the use of elastic, raised image plates. 2.Gravure printing Gravure refers to gravure printing, first the printing plate on the exces...
Color paste, also known as pigment paste, is an important form of dye application, which is widely used in textile, ink, paint and other industries. In the classification of pastes, low-halogen pastes and ordinary pastes are two common types. They have certain differences in composition, performance and use, and the differences between the two types of pastes will be discussed in detail below. Fir...
The performance requirements of water-based varnish for printing paper glazing are as follows: 1.The film has good environmental resistance. Some of the printed matter after glazing is used to make all kinds of packaging cartons, in order to be able to play a good protective effect on the packaged products, the environmental resistance of the glazing film layer must be better. For example, the pac...
First, material selection and preparation To make the resin crack effect, you first need to prepare the resin and pigment. Resin selection of high transparency, high hardness, wear resistance products, pigments can choose mineral pigments or metal pigments, you can also add a small amount of color pigments to prepare a rich color. Second, color mixing Mix the paint into the resin one by one and st...
Water-based ink is referred to as ink, and flexible water-based ink is also known as liquid ink, which is mainly made of water-soluble resins, organic pigments, solvents and related additives by composite grinding processing. Water-based ink is especially suitable for tobacco, wine, food, beverages, medicines, children's toys and other packaging and printing products with strict sanitary condition...
Enhance the adhesion of UV ink and UV varnish on paper products! The tape won't come off Fast drying speed to meet the needs of production line Good affinity with UV varnish and UV ink Excellent strength and toughness Water-based UV base oil for high adhesion paper products Anhui Sinograce Chemical waterborne UV primer for high adhesion paper products is a high-performance waterborne coa...
Rubber mold, silicone mold, shoe mold, latex pillow mattress mold, anti-stick easy mold Teflon spray, good model flon coating, non-stick mold surface treatment process The role of mold coating Molds are common tools in the manufacturing industry and are used to make a variety of products. In order to capture the service life and production efficiency of the mold, people often coat the surface of t...
In the face of different needs of different industries, rollers also need to do the corresponding coating treatment, so as to improve or compensate the relevant performance of the roller. So what are the surface coating technologies for rollers? 01 Coating treatment The coating treatment of the drum includes zinc plating, chromium plating, nickel plating, etc. The different coating treatment can i...
Thermal spray Teflon can not only reduce product costs and improve production efficiency, but also can be used to directly solve problems on the product to improve product quality and increase sales. After being sprayed with Teflon, it has the following characteristics: 1.Slippability: PTFE spray film has a low coefficient of friction. When the load slides, the friction coefficient changes, b...
Insufficient or uneven amount of glue due to insufficient amount of glue produced by the white spot can be observed in the composite machine. In the dry composite process, the coated adhesive must be able to fill the bumps and bumps on the surface of the ink and film to avoid appearance defects such as obvious white spots. When the water-based adhesive dry composite is used to produce lightweight ...
The final state of waterborne polyurethane is a solid film. During the process from emulsion to solid film, accompanied by the evaporation of water and the concentration of water dispersion, the latex particles are close to each other. Before the solid content reaches 74%, the dispersion particles can move in the continuous phase of water. Under the influence of water/air interfacial tension, the ...
Due to the hydrophobic properties of waterborne polyurethane resin, it is difficult to dissolve in water or disperse uniformly, and the high reactivity of isocyanate groups to water, the direct synthesis of waterborne polyurethane faces many challenges. Therefore, to achieve the preparation of waterborne polyurethane, the primary strategy is to cleverly integrate hydrophilic functional groups (suc...
1.Touch optimization: the pursuit of softness and fullness In view of the frequent skin-to-skin contact of fabrics, the primary goal of the design of waterborne polyurethane coatings is to achieve soft touch and full form. This requires us to carefully balance the ratio of hard and soft segments in the formulation adjustment, while carefully selecting the types of both to ensure that the coating r...
There are several main reasons for water-based emulsion breaking: 1.Large temperature changes, water-based emulsion is easy to separate into water phase and oil phase at high temperature, and easy to crystallize at low temperature. 2.The selection of emulsifier is improper, and the type and dosage of emulsifier are different, which has a great impact on the stability of emulsification. The choice ...
Before the textile coating, it is necessary to pretreat the textile surface to ensure the adhesion and quality of the coating. Common surface treatment methods are: cleaning, degreasing, polishing and so on. Cleaning can be done with hot water or solvents, degreasing can be done with alkaline or acid degreasing agents, and polishing is done by mechanical removal of surface hair. The choice of coat...
The role of wax emulsion in various coatings, in the coating formulation, polyethylene wax emulsion can effectively improve the wear resistance of the paint film, the paint film is very smooth, effectively reduce the friction coefficient of the coating, play a non-adhesive role, but also improve the service life of the product. 1.Synthetic wax emulsion can improve the toughness of the coating: whe...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية