-
What are the uses of polyurethane resin in ink
- 2023-03-07 11:44:11
- admin
Polyurethane (polyurethanes, abbreviated PU) is a kind of polymer with -NHCOO-repeat structural unit as the main chain. Isocyanate (monomer) is polymerized with a hydroxyl compound.Due to the strong polarity of the carbamate group, insoluble in non-polar groups, with good oil resistance, toughness, wear resistance, aging resistance and adhesion. Materials suitable for a wide temperature range (-50...
-
How much do you know about self-adhesive printed labels
- 2023-03-14 15:39:11
- admin
Self-adhesive refers to paper, film or other special materials as fabric, coated with adhesive on the back, a composite material printed with silicon protective paper as the base paper, the reason for the rapid rise of self-adhesive in recent years, because it is very practical, and very convenient, the cost is not high, the following to tell you about a few small knowledge of self-adhesive printi...
-
Introduction of six features of water-based acrylic emulsion
- 2023-04-04 18:09:50
- admin
1.Excellent adhesion The polymer structure of water-based acrylic emulsion contributes to the flow and wettability of molecular chains on the substrate surface, making the coating and substrate molecules in close contact, to achieve high adhesion. 2.High load-bearing capacity of the makeup filler can significantly reduce the cost Waterborne acrylic emulsion has excellent fillability, the total sol...
-
Is Nonstick coating Really Toxic?The nonstick frying pan at home. Will it work
- 2023-04-13 15:58:55
- admin
"Non-stick pan" is a very common pot in the kitchen, because in the process of using less oil consumption, less smoke, but also not easy to paste the problem, so it is welcomed by many people. In recent years, however, there have been more and more controversies about non-stick pans: Some people think that non-stick coating will produce toxic substances, can not be used for a long time; Some peopl...
-
Acrylic resin emulsion
- 2023-04-27 17:46:54
- admin
Acrylic acid Important organic synthesis raw materials and synthetic resin monomer Acrylic resin is an important organic synthesis raw material and synthetic resin monomer, is a very fast polymerization rate of ethylene monomer.Is the simplest unsaturated carboxylic acid, consisting of a vinyl group and a carboxylic group. Most of them are used to manufacture methyl acrylate, ethyl ester, butyl es...
-
Acrylic copolymer emulsion for building
- 2023-05-04 17:57:40
- admin
Application Acrylic emulsion is a kind of emulsion with wide applicability for construction. It can be used as a new chemical material for repairing steel structure concrete of hydraulic construction, port construction, highway, bridge, metallurgical chemical industry (urea chloro gangue) and other industrial civil buildings, such as seepage prevention, corrosion prevention and antifreeze. Cl...
-
Application of waterborne polyurethane in textile field
- 2023-05-12 17:41:25
- admin
Polyurethane is the short form of polyurethane (PU). It is a block polymer formed by addition polymerization. It is a polymer compound with flexible and elastic polyether or polyester as soft segment and rigid and hard carbamate as hard segment. It contains a considerable number of ammonia ester bonds. Waterborne polyurethane has been successfully applied in the textile printing and dyeing industr...
-
Study on the application of waterborne polyurethane in textile finishing
- 2023-06-09 16:10:44
- admin
Environmental protection pressure has prompted some traditional solvent-based products to gradually withdraw from the market and replace them with water-based, high solid content, powder products, etc.Waterborne polyurethane, as an important member of waterborne products, is facing unprecedented development opportunities with its unique excellent properties.In addition to the leather industry, it ...
-
Principle, classification, selection and dosage of defoamer
- 2023-08-30 16:26:08
- admin
The foam problem in water treatment has troubled many people, debuting the initial foam, surfactant foam, impact foam, peroxide foam, circulating water treatment with non-oxidizing fungicide generated foam, etc., so the use of defoamer in water treatment is more common, this article comprehensively introduces the principle, classification, selection and dosage of defoamer! Methods of foam eliminat...
-
Advantages and disadvantages of the same type of defoamer
- 2023-09-01 17:36:28
- admin
Advantages and disadvantages of the same type of defoamer Organic defoamer such as mineral oils, amides, low alcohols, fatty acids, fatty acid esters and phosphate esters has been studied and applied earlier, belonging to the first generation of defoamer, which has the advantages of easy access to raw materials, high environmental performance and low production cost.The disadvantages are low defoa...
-
The relationship between structure and dispersion of surfactants
- 2023-09-22 17:26:36
- admin
Water dispersion system is commonly used to analyze the relationship between surfactant structure and dispersion.As a hydrophobic solid particle, it can adsorb the hydrophobic group of the surfactant, and if it is an anionic surfactant, the outward-facing hydrophilic genes have the same charge and repel each other. Obviously, the adsorption efficiency of surfactants increases with the increase of ...
-
Warm congratulations to anhui sinograce chemical on its successful participation in the LABELEXPO Europe-2023 exhibition
- 2023-10-10 15:34:44
- admin
As a professional manufacturerof label and package printing coating industry, Anhui Sinograce Chemical Co., Ltd took part in this LABELEXPO Europe-2023 exhibition.he exhibition focused on showing the company's coatings in the field of coatings, including water-based label adhesive and water based paper adhesive,top and primers coating, Other Adhesive,coating additives,film etc. In the four da...
-
Low viscosity water-based acrylic adhesive how to choose the right defoamer
- 2023-10-10 14:09:28
- admin
Defoamer is a substance with low surface tension and high surface activity, which can inhibit and eliminate foam in the liquid, that is to say, defoamer can reduce the surface tension of water, solution, suspension, etc., to prevent foam generation or eliminate the original foam.Long-term defoaming is also known as defoaming, and the length of the defoaming time is the main sign of the quality of ...
-
What is the role of aluminized film glue, and what products are involved in paper packaging
- 2023-12-27 13:58:32
- admin
Aluminized film glue is a composite material that binds aluminum film and other materials together by glue. It is usually used in paper packaging to prevent moisture, oxidation, heat insulation and pollution. First of all, the aluminized film glue can effectively prevent the paper from absorbing moisture and oxygen in the air, thereby maintaining the dryness and freshness of the product and extend...
-
Performance of various water-based adhesives in printing and packaging applications
- 2024-01-13 15:43:40
- admin
Water-based adhesives for printing are very common, which mainly include water-based pasting adhesive, laminating adhesive, water-based sealing adhesive and so on. Water-based laminating adhesive Water-based film adhesive has been widely used in recent years for its high brightness, low cost, easy operation and water-based environmental protection. Water-based film adhesive is mainly divided into ...
-
laminated adhesive Laminating adhesive for deep embossing BOPP film PET film paper coated glue
- 2024-01-19 17:38:15
- admin
Brand :Sinograce Type: Water base adhesive Appearance:Milky white emulsion with blue light Performance and use:This product is suitable for the coating of BOPP film, PET film and printed color paper (dry coating process). High bonding q degree, large tension compound drying speed, good parallel flow; For gold and silver cardboard, single powder paper bonding q degree, tension q, to avoid the...