Categories
new blog
Waterborne paint testing and standards:hardness Hardness is one of the most important physical properties of a coating. Coating hardness reflects the coating's ability to resist constant dents, scratches, scribes, and penetrations caused by a hard object. Testing the hardness of materials with different methods will give different results because the testing methods are for different amounts of ma...
Current problems with waterborne polyurethane adhesives: (1) Low solid content: At present, the solid content of water-based polyurethane (WPU) can reach 45%. Fewer systems lead to higher drying and transportation costs. Increasing the solid content leads to an increase in the viscosity of the system, which makes emulsification and dispersion difficult. Reduced emulsion stability. (2) Slow drying ...
Precautions for using two-component polyurethane adhesives 1.Before applying the adhesive, the surface of the adherend must be clean, dry and free of grease. 2.The resin and curing agent should be mixed in the required ratio. 3.When scraping the glue, please try to scrape it carefully as it has a defoaming effect. 4.Store adhesive in (> 10, <50 * C) and dry place 5.Run out of the mixed glue ...
Glass fiber is an important reinforcing material for the manufacture of fiber reinforced plastics (FRP), and is also used for weaving high temperature resistant fiber cloth.But the glass fiber that has not been treated is brittle, easy to take static electricity after friction, and the surface is smooth, when making the reinforcing material of the resin is not easy to stick with the resin.In the m...
Thank you for the New Year gift of our company. In the New Year, we hope to make our products better and serve our customers better,Hope the performance increase day! Sinograce Chemical wish you a happy New Year!
One, extinction principle General can be divided into physical extinction and chemical extinction.Physical matting, is the addition of matting agent, so that the coating in the film when the uneven surface, reduce reflection and achieve low gloss. Two, the kind of matting agent Coating common matting agent can be divided into organic matting agent and inorganic matting agent two categories. 1.Orga...
The choice of solvent In the printing ink manufacturing process, in consideration of the overall solvent system of the ink volatility, to improve the printing ink solvent release and reduce the solvent organic solvent residue, the use of solvents are often several volatile mixed solvents.In the printing ink manufacturing process, the main organic solvents are toluene, butanone, cyclohexanone, ethy...
At present, two-component waterborne polyurethane has been widely used in leather, textile dyeing AIDS, adhesives, foam materials, coatings and other fields. With the continuous development of two-component waterborne polyurethane scientific research, it is gradually replacing solvent polyurethane as the medium to occupy the dominant position in the market. One: leather China's leather resources, ...
1.Introduction to silicone acrylic emulsion Silicon-acrylic emulsion is a kind of composite emulsion. It is a copolymer emulsion of organosilicone and acrylate.Acrylic resin has many excellent characteristics, such as weather resistance and light resistance, long time under ultraviolet irradiation is not easy to yellow。In addition, it also has flexibility, so it is often used as a leather finishin...
Water-based wood lacquer can be used to apply. The characteristics of the brush method is simple, easy to master, fast coating speed, and can eliminate the brush method commonly seen bubbles and brush marks and other shortcomings. This is because the paint left on the surface of the wood is very thin and the pressure of the brush is high, which makes the air in the wood grain and micro hole easy t...
Composition of water bases adhesive 1.adhesive: also known as adhesive agent, after the surface treatment of two or more adhesive materials firmly connected together, and has a certain mechanical strength of chemical properties, such as epoxy resin phosphate copper oxide white latex. 2.Solid material (base material): determines the main physical, chemical and mechanical properties of rubber joints...
1.Principles of adhesive selection Consider the type, nature and hardness of the bonding material Consider the shape, structure and process conditions of the bonding material Consider the load and form (tensile force, shear force, peel force, etc.) borne by the bonding part; consider the special requirements of materials such as high temperature and low temperature resistance. 2.Properties of bond...
Automotive interior adhesive is a anionic waterborne polyurethane emulsion developed and produced by ourselves, which belongs to environmental protection waterborne polyurethane adhesive. Appearance Dark grey liquid Solid content(% ) 50±1 PH 6-9 softening point(℃) 45-55℃ Proportion（g/cm3） 1.06±0.02 viscosity（mPa.s） 1000-2000（Viscosity can be adjusted） Application Area Automobile interior adhesive ...
Water based wood lacquer is mainly made of waterborne acrylic acid and polyurethane and refined by strict production process standards. It is suitable for the protection of indoor wood and wood products, and can play the role of decoration, protection and service life extension.Waterborne wood lacquer uses water as diluent, does not contain benzene and other harmful substances, non-toxic...
What are the uses of waterborne acrylic emulsions? Waterborne acrylic emulsion is used as finishing agent for silk fabrics and leather Water based acrylic emulsion is used as finishing agent and treating agent for photographic printing paper Waterborne acrylic emulsion has good sealing performance on wood grease and tannic acid, used as transparent sealing primer for wood,...
Laminated oil magnetic cards, Identification Card and other cards used in water-based adhesive. The card is both a document and a form or carrier of the document's existence, although it has entered the 5G era,Many things exist in electronic form, such as electronic balance cards, electronic driver's licenses, electronic health care cards, etc.But the physical card such as id card bank card is als...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية