Categories
new blog
The main difference is that the nature is different, the production process is different, and the characteristics are different, as follows: First, the nature is different 1.Flexo printing Flexo printing is a direct printing method known as flexo printing because of the use of elastic, raised image plates. 2.Gravure printing Gravure refers to gravure printing, first the printing plate on the exces...
The performance requirements of water-based varnish for printing paper glazing are as follows: 1.The film has good environmental resistance. Some of the printed matter after glazing is used to make all kinds of packaging cartons, in order to be able to play a good protective effect on the packaged products, the environmental resistance of the glazing film layer must be better. For example, the pac...
"If there are small bubbles in the complex, opaque and foggy, it will not only affect the appearance quality, but also affect the peeling strength of the complex, reducing it, which is a very bad phenomenon." 1.The surface tension of the base film is too small, the infiltration is poor, the glue is not uniform, and the space without glue is empty and bubbles are generated. The solution is to use a...
Ink scraping is not clean troubled many manufacturers, there are ten reasons for scraping is not clean, save it for use! 1.Ink viscosity is too high When the viscosity of the ink increases, the surface tension also increases correspondingly, and the force between them also increases, so that the scraper will increase the impact force of the ink on the scraper in the contact process with the ink, d...
First, material selection and preparation To make the resin crack effect, you first need to prepare the resin and pigment. Resin selection of high transparency, high hardness, wear resistance products, pigments can choose mineral pigments or metal pigments, you can also add a small amount of color pigments to prepare a rich color. Second, color mixing Mix the paint into the resin one by one and st...
Leather surface treatment agent Matte resin is a surface treatment agent, mainly used to add a matte effect to the leather surface. The principle is to form a layer of tiny particles on the surface of the leather material, and the refracted light is dispersed, making the surface appear matte. Automotive interior leather market demand analysis As a high-grade and beautiful material, leather has a w...
Water-based ink is referred to as ink, and flexible water-based ink is also known as liquid ink, which is mainly made of water-soluble resins, organic pigments, solvents and related additives by composite grinding processing. Water-based ink is especially suitable for tobacco, wine, food, beverages, medicines, children's toys and other packaging and printing products with strict sanitary condition...
Paper ink absorption is not only related to the degree of porosity and capillary state of the paper, but also related to the surface properties of the paper fiber, the content of fillers, pigments, adhesives, ink composition and characteristics, printing methods, printing pressure and other factors. In actual printing, the absorption of ink by paper can be divided into two stages. The first stage ...
Waterborne polyurethane (WPU) is a water-based dispersion material, and its unique low viscosity characteristics often bring construction challenges such as flow hanging and penetration. In order to solve these problems and improve its construction performance, self-leveling performance and storage stability, the addition of thickener has become a key step. The thickener not only endows the water-...
In the use of pesticides, only a few cases are the direct use of the original drug, and most of the cases are mixed with other additives and solvents to improve its use value and reduce the cost of use. Surfactant is a kind of additives that can give greater play to the value of pesticides and reduce the cost of pesticides. It plays the role of emulsification, foaming/defoaming, dispersi...
Teflon coating is one of the commonly used protective coatings in metal thermal spraying processing technology services, with good non-stick, wear resistance, corrosion resistance, high temperature resistance and other characteristics, can be applied to carbon steel, stainless steel, aluminum, copper, magnesium and various alloys and other metal materials. It can also be applied to non-metall...
Thermal spray Teflon can not only reduce product costs and improve production efficiency, but also can be used to directly solve problems on the product to improve product quality and increase sales. After being sprayed with Teflon, it has the following characteristics: 1.Slippability: PTFE spray film has a low coefficient of friction. When the load slides, the friction coefficient changes, b...
Many people think that the temperature of the primer baking (dry) of Teflon paint is not important, just bake it, in fact, this is a misunderstanding. If you usually encounter the following situations, please carefully bake the primer. For the primer coating of Teflon paint, we recommend a temperature of 150 ° C, after the workpiece reaches 150 ° C, bake for 5-10 minutes. I. If the temperature of ...
1.Ink The three primary color inks have different degrees of color bias, which will affect the color bias of the whole picture to different degrees. However, a small amount of color bias can be corrected from the ink preparation. When printing to grasp the gray balance of the ink used, the same amount of yellow, product, green do not produce neutral gray, they produce lighter, more turbidity with ...
The hardness and softness of the water-based acrylic resin can be adjusted according to specific needs, but it is usually biased towards the harder side. First, the characteristics and application of water-based acrylic resin Water-based acrylic resin is an environmentally friendly water-based resin, with non-toxic, easy to clean, dry fast and other characteristics, widely used in furniture, packa...
The final state of waterborne polyurethane is a solid film. During the process from emulsion to solid film, accompanied by the evaporation of water and the concentration of water dispersion, the latex particles are close to each other. Before the solid content reaches 74%, the dispersion particles can move in the continuous phase of water. Under the influence of water/air interfacial tension, the ...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية