• 2026-09-03 15:43:32
• admin

Poor surface smoothness, low gloss, and microscopic pinholes may occur during the spraying and baking of waterborne PTFE non-stick coatings. These defects can allow steam, fats, and corrosive substances to penetrate the coating over time, increasing the risk of blistering, peeling, and reduced non-stick performance. Why Pinholes May Form Pure PTFE has extremely high melt viscosity and limited flow...

• PFA dispersion
• PTFE coating pinholes
• PFA modified dispersion

• 2026-09-30 15:33:07
• admin

Does Your Textile Printing Paste Still Feel Sticky or Crack? This Water-Based PU Resin Combines Softness with High Elongation Manufacturers of textile prints and thick coatings for footwear materials may have encountered these frustrating problems: The printed paste remains sticky after drying and causes blocking when the fabrics are stacked. The coating cracks or peels after several washes. In co...

• Water-Based PU Resin
• Textile Printing Binder
• Waterborne Polyurethane for Textile Coating

• 2026-09-30 16:35:42
• admin

On September 11, all employees of Anhui Sinograce Chemical Co., Ltd. stepped away from their busy work schedules and spent a relaxing and rewarding day together at a countryside resort surrounded by nature. In the morning, employees were divided into groups to participate in a variety of fun team activities. Everyone communicated actively and worked together to complete each task. The cheerful atm...

• chemical company team building
• company culture
• Sinograce Chemical team