Categories
new blog
Some surface properties of plastic substrate affect coating, and the properties related to coating mainly include the following aspects: Due to the characteristics of the plastic substrate itself, its smooth and compact, low surface energy is not conducive to the wetting and adhesion of the coating on the substrate. The crystallinity of the plastic affects the adhesion of the film, and its crystal...
The internal structure of waterborne acrylic emulsion particles will affect several aspects of waterborne paint formulations.According to the order in which the effects are affected, the phase structure will first affect the selection and addition of the filming aid.Different phases have different hydrophilic/lipophilic characteristics, and the oleophilic properties of various coalescents are diff...
Acrylic pressure sensitive adhesive is a large range, PUR is one of them, most of the acrylic pressure sensitive adhesive is heated operation, can be reheated after bonding, is reversible.And PUR is wet reaction acrylic pressure sensitive adhesive, heating operation, after bonding and moisture in the air reaction, after the reaction is irreversible (that is, heating will not melt). So PUR is more ...
◆ The procedure of bonding process:◆ The adhesive surface should be evenly coated to ensure infiltration, as far as possible to avoid bubbles, due to the porosity of the adhesive strength greatly reduced, resulting in degumming.Attention should be paid to the alignment of the position, not staggered, can be pressurized, air exclusion, make it close contact. Time is three important parameters of cu...
Composition of pressure sensitive tape 1.Pressure sensitive adhesive, 2.substrate 3.Primer 4.Back treatment agent 5.Isolation paper The main components of the pressure sensitive adhesive and resin, including rubber such as polyacrylic acid ester or polyvinyl ether, homogeneous base material requirements, small scale and good to solvent invasive, including, (1) fabric such as cotton, glass cloth or...
The bonding effect can be achieved by applying pressure for a short time (non-aqueous solvent heating) It overcomes the solvent volatilization and drying time needed during the operation of structural adhesive, and can improve the working environment After stripping, it can be corrected without contamination and can be reused for many times Easy to operate, can greatly improve the production effic...
In the process of coating manufacturing, it is necessary to belong to the hydrophilic polar material Yan, fillers dispersed to belong to the hydrophobic non-polar material organic base material.In order to increase the affinity between inorganic matter and organic polymer, it is generally necessary to use coupling agent or other surfactants to treat the surface of inorganic matter, so that it chan...
Water-based glue, when the autumn and winter season, special attention should be paid to anti-freezing treatment, according to different temperatures, the implementation of different solutions. Cautions (1) Pay attention to warmth and anti-freezing when transporting glue: when transporting below 0℃, pay attention to the warmth of the vehicle, and transport below -5℃ is prohibited; (2) Ke...
Protective film glue transfer, there are a variety of factors, I believe that in the work, many teachers will also encounter a similar situation.The phenomenon of the so-called glue transfer is uneven coating or in the process of transportation, the glue shift remains on the surface of the profile, commonly known as glue transfer. Protective film glue transfer can be divided into the followin...
During December 10, 2022, customers from Russia have come to visit our company. Foreign trade manager and relevant personnel warmly welcome our customers, and introduced our product which they are interested in detailedly. Water based glue
Classification and characteristics of screen-printable pressure sensitive adhesives I.Characteristics and performance requirements of screen printing process Screen printing is through a certain pressure to make the printing base material through the holes of the plate to the substrate, the formation of an image or text. In order to achieve good printing adaptability, the physical properties of sc...
Classification and characteristics of screen-printable pressure sensitive adhesives Ⅱ Classification of screen-printable pressure sensitive adhesives Because of the simple screen printing equipment, convenient operation, simple printing, plate making and low cost, for the application of coating pressure sensitive adhesive, also often consider the use of screen printing process to coating.The ...
Screen printing UV pressure sensitive adhesive and screen printing water-based pressure sensitive adhesive, has the following different characteristics: because UV curable pressure sensitive adhesive does not contain water or organic solvent, so it can be cured without heating drying channel, and water-based pressure sensitive adhesive to water as diluent, need a lot of heat to volatilizing water;...
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. On January 16, 2023, Sinograce Chemical held a year-end work summary meeting and a New Year party. Sinograce Chemical wishes all customers a happy New Year and a better and better New Year.
Water based adhesive Water-based adhesive refers to the water-soluble polymer dissolved into appropriate concentration of aqueous solution, or insoluble polymer dispersed into micro-particles (emulsion) in water with the help of surfactant in the general term of adhesives;In simple terms, adhesives made of materials that can be dispersed or dissolved in water are aqueous adhesives and are often re...
Pressure sensitive adhesive (PSA) is a self-adhesive material, only need to apply a small pressure, can form a van der Waals force on the surface of the two objects, and the adhesive is firmly bonded, this pressure sensitive bonding performance is its basic feature, is also different from other adhesives typical characteristics. PSA can be divided into solution type, emulsion type, photocuring typ...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية