• 2026-05-11 16:49:22
• admin

When manufacturing labels, the choice of adhesive backing is just as crucial as the face material and print quality. Whether a label adheres firmly, resists edge curling, or leaves behind residue upon removal often depends heavily on the adhesive applied to its backing. The adhesive commonly used on the back of labels is known as pressure-sensitive adhesive (PSA). This type of adhesive requires ne...

• PSA for Label Adhesive
• Pressure Sensitive Adhesive
• label adhesive

• 2026-05-28 17:52:05
• admin

When choosing coated work gloves, customers often focus on grip patterns, coating color or glove thickness. However, the performance of a dipped glove also depends greatly on the latex material used in the coating formulation. A good coating should remain attached to the knitted liner, bend easily with hand movement and withstand repeated contact during daily work. If the coating is too rigid, the...

• Dipped Work Glove Coating
• XSBR Latex for Gloves
• Carboxylated Styrene-Butadiene Latex

• 2026-06-01 18:20:08
• admin

In ceramic fiber paper production, the sheet does not always fail at the forming stage. Sometimes the wet sheet looks acceptable, but problems appear later during drying, winding, or cutting. For example, the paper may feel weak after drying. The edge may crack during slitting. Fine fiber dust may come off the surface. In continuous production, these small problems can quickly lead to material los...

• ceramic fiber paper dusting
• ceramic fiber paper cracking
• binder for insulation paper