• 2026-05-28 17:52:05
• admin

When choosing coated work gloves, customers often focus on grip patterns, coating color or glove thickness. However, the performance of a dipped glove also depends greatly on the latex material used in the coating formulation. A good coating should remain attached to the knitted liner, bend easily with hand movement and withstand repeated contact during daily work. If the coating is too rigid, the...

• Dipped Work Glove Coating
• XSBR Latex for Gloves
• Carboxylated Styrene-Butadiene Latex

• 2026-06-05 18:37:46
• admin

BOPP, PP, OPP, and PE films are widely used in flexible packaging, labels, and decorative applications due to their transparency, chemical resistance, and stable processing properties. However, printing on these films isn’t always straightforward. A printed surface may look fine initially, but problems can appear during tape tests, rewinding, die-cutting, or transport. Ink may peel, scratch, or lo...

• Water-based top coating
• BOPP ink adhesion
• Film surface treatment

• 2026-06-10 17:41:44
• admin

In packaging and label printing, a good printed surface is not only about bright color. It also needs to stay firmly on the substrate during rewinding, cutting, lamination, transportation and daily use. Some common problems are familiar to many ink manufacturers and printers: ink peels off after tape testing, the printed surface is easily scratched, color becomes uneven, or the ink layer loses str...

• acrylic emulsion for ink
• pigment grinding emulsion
• water-based ink resin

• 2026-07-22 18:56:18
• admin

When formulating a water-based acrylic pressure-sensitive adhesive for labels, Tg is usually one of the first parameters we set. It indicates whether the dry adhesive film will behave relatively soft or firm at a given temperature and influences initial tack, peel adhesion, holding power, low-temperature performance and adhesive ooze. However, Tg alone does not determine whether an adhesive is sui...

• pressure sensitive adhesive Tg
• removable label adhesive formulation
• label adhesive Tg

• 2026-07-29 17:36:58
• admin

When UV ink comes off during a tape test, the primer is often blamed first. However, poor adhesion can also result from the film surface, contamination, incomplete primer drying or incorrect UV curing. Here, “adhesion promoter” refers to a primer applied before printing. No single grade is suitable for every plastic film. Choose the Primer by Substrate PET and BOPET films often benefit from a prim...

• BOPP printing primer
• UV ink adhesion promoter
• water-based UV ink primer