Categories
new blog
Adhesives can be used to bond metal, glass, wood, paper, fiber, rubber, plastic and other materials together to produce a function or performance greater than the sum of its part and the whole. Adhesive bonding method is increasingly replacing the mechanical coupling method, which is mainly due to the adhesive bonding method has the following advantages. (1) Film, fiber and small particles an...
Adhesives can be used to bond metal, glass, wood, paper, fiber, rubber, plastic and other materials together to produce a function or performance greater than the sum of its part and the whole. Adhesive bonding method is increasingly replacing the mechanical coupling method, which is mainly due to the adhesive bonding method has the following advantages. (1) Film, fiber and small particles an...
Anhui sinograce Chemical Co., Ltd.participated in the 20th China International Adhesive and Sealant Exhibition in 2017 and get complete success. Sinograce Chemical as a well-known brand in water-based products industry, participated in this event. The exhibition focused on the display of water-based acrylic adhesive and special modified acrylic adhesive. In the three...
The rubber pressure-sensitive adhesive in addition to the main components of rubber, while adding a thickening resin, plasticizers and so on. The rubber type pressure-sensitive adhesive is made of rubber elastomer, thickener, softener, antioxidant and other components dissolved in the preparation of solvent.In addition to resin, resin pressure-sensitive adhesive must also add to defoamer.Wett...
In addition to China, the United States, Europe, Japan are the main origin of water-based pressure-sensitive adhesive. Although the world's water-based pressure-sensitive adhesive production cannot be counted，probably the trend can be seen. In the water-based pressure-sensitive adhesive products,transparent sealing tape, stickers label dominant. Production of Pressure-sensitive is low,return ...
The method to determine whether the quality of the seal printing tape is poor: Ordinary sealing tape glue is acrylic glue, also known as pressure-sensitive adhesive, the main component is tincture. Tincture is a kind of macromolecular active substance. The activity will be affected by the level of temperature. Tincture content of glue will directly affect the use of tape. Some individuals thi...
The Selection of good quality water-based adhesive not only help to improve the production efficiency, but also to protect the appearance of the product quality. Such as widely used in the field of self-adhesive water-based pressure-sensitive adhesive, such as water-based pressure-sensitive adhesive which is widely used in the field of stickers. This adhesive has many advantages, it is particularl...
Some of the traditional glue in the adhesion of a great advantage is good adhesion, and the efficiency is very low, the most important thing is relatively low cost, most are someorganic materials. Relatively speaking,the biggest advantage of water-based adhesive is green, the traditional glue is inorganic materials, so it is not very environmentally friendly, pollution is relatively large, water-b...
Labelexpo Europe 2019 at the period of 24-27 September, 2019 in BRUSSELS, Belgium At Labelexpo Europe 2019, view hundreds of live demonstrations of the latest innovations, examine the most advanced collection of label and package printing technologies and acquire what your business needs to succeed. Explore the world’s largest label and package printing trade show and advance ten steps ahead of th...
Plastics are classified into two types: thermosetting and thermoplastic.Among them, thermosetting plastics have high cross-linking density, good solvent resistance and heat resistance, relatively high surface polarity, and wide range of coatings available.For example, unsaturated polyester is called polyester fiberglass. The texture is hard and polar, and there are many coatings that can be used. ...
Current problems with waterborne polyurethane adhesives: (1) Low solid content: At present, the solid content of water-based polyurethane (WPU) can reach 45%. Fewer systems lead to higher drying and transportation costs. Increasing the solid content leads to an increase in the viscosity of the system, which makes emulsification and dispersion difficult. Reduced emulsion stability. (2) Slow drying ...
Composition of water bases adhesive 1.adhesive: also known as adhesive agent, after the surface treatment of two or more adhesive materials firmly connected together, and has a certain mechanical strength of chemical properties, such as epoxy resin phosphate copper oxide white latex. 2.Solid material (base material): determines the main physical, chemical and mechanical properties of rubber joints...
1.Principles of adhesive selection Consider the type, nature and hardness of the bonding material Consider the shape, structure and process conditions of the bonding material Consider the load and form (tensile force, shear force, peel force, etc.) borne by the bonding part; consider the special requirements of materials such as high temperature and low temperature resistance. 2.Properties of bond...
Automotive interior adhesive is a anionic waterborne polyurethane emulsion developed and produced by ourselves, which belongs to environmental protection waterborne polyurethane adhesive. Appearance Dark grey liquid Solid content(% ) 50±1 PH 6-9 softening point(℃) 45-55℃ Proportion（g/cm3） 1.06±0.02 viscosity（mPa.s） 1000-2000（Viscosity can be adjusted） Application Area Automobile interior adhesive ...
Laminated oil magnetic cards, Identification Card and other cards used in water-based adhesive. The card is both a document and a form or carrier of the document's existence, although it has entered the 5G era,Many things exist in electronic form, such as electronic balance cards, electronic driver's licenses, electronic health care cards, etc.But the physical card such as id card bank card is als...
When waterborne polyurethane is used as adhesive, it must be mixed generally. Based on waterborne polyurethane, crosslinking agent, thickening agent, filler, plasticizer, pigment and other additives can be added. Other types of waterborne resin and water can be added.In order to obtain higher resistance to water Heat resistance and bonding strength, at present a lot of waterborne polyurethane syst...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية