Categories
1. The effect of membrane material There are dust adsorption, particle impurities, poor plasticization and other crystal points in the film. The moisture absorption on the film surface of the material and the precipitation of additives in the material will cause composite bubbles. The thickness of the film should be as uniform as possible, if the distribution is uneven, it is easy to cause the imb...
Brand :Sinograce Type: Water base adhesive Appearance：Milky white emulsion with blue light Performance and use:This product is suitable for the coating of BOPP film, PET film and printed color paper (dry coating process). High bonding q degree, large tension compound drying speed, good parallel flow; For gold and silver cardboard, single powder paper bonding q degree, tension q, to avoid the...
As an important material for printing, ink is composed of resin, pigment, filler and auxiliary. Due to many industries such as books, packaging, construction, and circuit boards, with the gradual increase in social demand, the use of ink is also increasing. However, in the production and use of ink, due to the addition of surfactants, equipment stirring operation and environmental changes will cau...
"If there are small bubbles in the complex, opaque and foggy, it will not only affect the appearance quality, but also affect the peeling strength of the complex, reducing it, which is a very bad phenomenon." 1.The surface tension of the base film is too small, the infiltration is poor, the glue is not uniform, and the space without glue is empty and bubbles are generated. The solution is to use a...
The high adhesion base coating improves the adhesion of the inkjet coating on PP paper Prevent ink from penetrating into PP composite paper substrate Fast drying speed to meet the needs of production line Good weather resistance, no yellowing Easy to use, safe and environmentally friendly Anhui sinograce company's PP composite paper digital inkjet coating adhesive base | Inkblot coating base ...
Many people think that the temperature of the primer baking (dry) of Teflon paint is not important, just bake it, in fact, this is a misunderstanding. If you usually encounter the following situations, please carefully bake the primer. For the primer coating of Teflon paint, we recommend a temperature of 150 ° C, after the workpiece reaches 150 ° C, bake for 5-10 minutes. I. If the temperature of ...
Waterborne Polyurethane (WPU) is a polyurethane system using water as a solvent or dispersion medium. In recent years, with the increasingly strict environmental regulations and the improvement of people's environmental awareness, waterborne polyurethane, as an environmentally friendly material, has received extensive attention and research. First, the characteristics of waterborne polyuretha...
Fabric coating finishing is to evenly coat a layer of molecular film on the surface of the fabric to give the fabric with various functions and expand the use of the fabric. Compared with other coating materials, polyurethane coating has high tensile strength, large elongation, good elasticity, good wear resistance, heat resistance, low temperature resistance and aging resistance, and is a hi...
Aqueous acrylic emulsion is a kind of chemical raw material with strong function and excellent performance, which is widely used in many fields such as coating, ink, textile, papermaking and waterproofing. This emulsion is mainly composed of pure acrylic monomer, which is prepared by precise copolymerization, and its non-toxic and pollution-free characteristics make it popular. I.Physica...
In the formulation of water-based paint, the choice of emulsion raw material is the most important decision for the engineer. The main properties of the paint are determined by the resin. There are a wide variety of water-based acrylate emulsions, including polystyrene-acrylate emulsions, which are mixed in the market. The different composition of water-based acrylate resin has great influence on ...
Particle size and hydrolysis resistance: The stability of the emulsion is closely related to the particle size and hydrolysis resistance of the polyurethane particles. The smaller the particle size, the better the stability of the emulsion. The poor hydrolysis resistance will cause the emulsion to degrade slowly during the storage process, produce carboxyl group, reduce pH value, and make the emul...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية