• 2024-11-20 17:54:47
• admin

Gloves are mainly used to protect the skin from harm in People's Daily activities and special environments, and can also be used to play a decorative role in daily life.According to the different production methods, it is divided into knitted gloves, sewing gloves, soaked gloves and so on. Depending on the function, there are flame retardant gloves, welding gloves, non-slip gloves, oil resistant g...

• polyurethane glove emulsion resin
• safety gloves coating water based polyurethane dispersion
• polyurethane dispersion

• 2024-12-17 16:39:26
• admin

Glove PU coating refers to coating the outer layer of gloves with a layer of polyurethane (PU) material. This coating has a variety of functions, mainly including: Oil and chemical resistance: makes the gloves suitable for work environments where oils and chemicals need to be handled. Anti-slip and wear resistance: Enhances the stability of the gloves in wet or greasy environments, reduces the ris...

• foam latex glove palm coating
• gloves coating liquid
• safety gloves coating water based polyurethane dispersion

• 2024-12-25 17:52:42
• admin

In the formulation of water-based paint, the choice of emulsion raw material is the most important decision for the engineer. The main properties of the paint are determined by the resin. There are a wide variety of water-based acrylate emulsions, including polystyrene-acrylate emulsions, which are mixed in the market. The different composition of water-based acrylate resin has great influence on ...

• pure acrylic emulsion
• self crosslinking acrylic emulsions
• acrylic emulsion binder

• 2025-01-20 17:50:39
• admin

Particle size and hydrolysis resistance: The stability of the emulsion is closely related to the particle size and hydrolysis resistance of the polyurethane particles. The smaller the particle size, the better the stability of the emulsion. The poor hydrolysis resistance will cause the emulsion to degrade slowly during the storage process, produce carboxyl group, reduce pH value, and make the emul...

• liquid polyurethane rubber
• waterborne polyurethane resin
• aliphatic polyurethane binder

• 2025-06-06 17:57:17
• admin

Dispersed PTFE is a secondary particle formed by the coagulation of PTFE dispersed particles, with a diameter of 500μm. It is in powder form and has a large specific surface area. After absorbing organic solvents, it forms a paste under the action of shear force. It is usually formed by extrusion molding process, so it is called paste extrusion molding. 1.PTFE dispersion impregnation. Product...

• PTFE emulsion
• ptfe dispersion emulsion
• ptfe dispersion