Categories
With the progress of science and technology, the printing technology industry is also developing rapidly, and more and more adhesives are used in the packaging and printing industry, and more and more varieties are also available. The film coating process is widely used in a variety of packaging, small to medicine boxes, crafts boxes, large to outer boxes and various product packaging. Some coatin...
That is, metal foil printing adhesive, commonly known as hot stamping adhesive, is a special performance adhesive, but also the key to the success of metal foil printing. product presentation Hot stamping adhesive consists of a special adhesive composed of a suitable hot melt adhesive and a bonding resin, which is composed of two points: 1.There are polyamide series, polyester series, polyethylene...
There are four common waterborne polyurethane thickeners: ①Inorganic thickeners, such as flake silicates, fumed silica, etc.; ②Natural organic thickeners, such as cellulose ethers; ③Synthetic organic thickeners, such as polyacrylates, polyvinylpyrrolidone; ④associative thickener. This paper mainly introduces the associated emulsion thickener. Associative emulsion thickeners are non-ionic synthetic...
In gravure printing, ink resolubility is also a key indicator to test the performance of ink. Especially in the color ink printing, the moderate resolubility can not only make the color fully displayed, but also solve the problem of shallow plate mesh blocking and overprinting cross-color. In color ink printing, according to the different hue requirements, the depth of the ink hole mesh of the pri...
After the ink is stored for a period of time, the upper part of the ink appears thin in the container, the viscosity is small, and the color and concentration are relatively poor; The lower part is thick, the viscosity is large, and the color and concentration are also relatively good. Intaglio printing inks are thin and have a small viscosity, because the pigment is poorly dispersed in the connec...
In order to prevent ink delamination and pigment precipitation, users must be fully stirred before printing. The following summarizes the faults and elimination methods of screen printing ink in use for your reference. 1.Poor adhesion: the reason is improper selection of ink, insufficient pre-press treatment, impurities in the substrate, insufficient drying temperature, insufficient time, improper...
With the development of the application of digital inkjet printing technology in the clothing industry, environmental monitoring is more stringent and the demand for small batch production and personalized customization is increasing. Therefore, the requirements for textile coating ink are becoming higher and higher, and the raw materials for the production of textile coating ink are bec...
What is a peelable resin? Strippable resin is a special resin material with strippable properties (also known as removable film resin). It is often used in the preparation of protective films for electronic products, packaging of semiconductor devices, etc., which can protect these products more intact, and it is easy to peel off when it needs to be replaced or disassembled. When prepari...
Protective film resin Automobile coating resin High resilience waterborne polyurethane resin 1.Typical properties Appearance： Milky white liquid Protective film resin Automobile coating resin Ph： 7.0-9.0 Automobile coating resin Solid content： 40±1% Charge： Anionic High resilience waterborne polyurethane resin Viscosity (25℃)： 300-800cP Elongation (%)： >200...
The main difference is that the nature is different, the production process is different, and the characteristics are different, as follows: First, the nature is different 1.Flexo printing Flexo printing is a direct printing method known as flexo printing because of the use of elastic, raised image plates. 2.Gravure printing Gravure refers to gravure printing, first the printing plate on the exces...
Water-based ink is referred to as ink, and flexible water-based ink is also known as liquid ink, which is mainly made of water-soluble resins, organic pigments, solvents and related additives by composite grinding processing. Water-based ink is especially suitable for tobacco, wine, food, beverages, medicines, children's toys and other packaging and printing products with strict sanitary condition...
Rubber mold, silicone mold, shoe mold, latex pillow mattress mold, anti-stick easy mold Teflon spray, good model flon coating, non-stick mold surface treatment process The role of mold coating Molds are common tools in the manufacturing industry and are used to make a variety of products. In order to capture the service life and production efficiency of the mold, people often coat the surface of t...
The most important difference between non-stick cookware and ordinary cookware is that the surface is coated with a layer of non-stick paint, and the Teflon non-stick cookware commonly used on the market is to coat the main raw material of fluorinated resin such as polytetrafluoroethylene coating on the metal surface such as aluminum, copper or iron, and through sintering. Properties of NI-PTFE co...
In the face of different needs of different industries, rollers also need to do the corresponding coating treatment, so as to improve or compensate the relevant performance of the roller. So what are the surface coating technologies for rollers? 01 Coating treatment The coating treatment of the drum includes zinc plating, chromium plating, nickel plating, etc. The different coating treatment can i...
Thermal spray Teflon can not only reduce product costs and improve production efficiency, but also can be used to directly solve problems on the product to improve product quality and increase sales. After being sprayed with Teflon, it has the following characteristics: 1.Slippability: PTFE spray film has a low coefficient of friction. When the load slides, the friction coefficient changes, b...
The final state of waterborne polyurethane is a solid film. During the process from emulsion to solid film, accompanied by the evaporation of water and the concentration of water dispersion, the latex particles are close to each other. Before the solid content reaches 74%, the dispersion particles can move in the continuous phase of water. Under the influence of water/air interfacial tension, the ...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية