Categories
new blog
What is nano coating? What are the advantages? Nano paint is a new high-tech coating, is the nano raw materials and coating material, in addition to add silicon oxide single slurry nano technology emulsion nano technology pesticides fungicide and other modifiers.The metope paint with relative tradition not only lacquer face is meticulous and extraordinary, and price also is cost-effective.The meto...
The most important application indexes of water-based adhesives in the packaging and printing industry mainly include four aspects: bonding strength, high/low temperature resistance, moisture resistance and viscosity holding.In practical application, defects such as weak adhesion and brittle degumming film are basically caused by the above four application indicators are not up to standard.In prac...
Water-based adhesives are environmentally friendly adhesives made of natural or synthetic macromolecule as adhesives and water as solvent or dispersant instead of toxic organic solvents that pollute the environment.Existing water-based adhesives are not 100% solvent-free and may contain limited vocs as additives for their aqueous media in order to control viscosity or fluidity.Advantages are mainl...
Waterborne polyurethane fabric coating agent can give the fabric a good soft and plump feel and skin feeling, and the anti-wrinkle, anti-shrinkage, resilience and flexure of the coated fabric have been greatly improved, waterproof waterproof polyurethane fabric coating agent has become the fabric manufacturers and consumers favored object.So how does waterborne polyurethane work as a waterproofing...
Adhesives with water (inorganic solvent) as the solvent/carrier are called water-based glues, solute (glue) can be dissolved in water/or dispersed in water,Water-based glue can be miscible and dispersed in water, diluent is water. Adhesives with organic solvents as solvents/carriers are called oil-based adhesives (solvent-based adhesives). Oil-based adhesives are not soluble in water and cannot be...
◆ The procedure of bonding process:◆ The adhesive surface should be evenly coated to ensure infiltration, as far as possible to avoid bubbles, due to the porosity of the adhesive strength greatly reduced, resulting in degumming.Attention should be paid to the alignment of the position, not staggered, can be pressurized, air exclusion, make it close contact. Time is three important parameters of cu...
The chemical composition of glue, the polymer in the water environment glue (vinyl acetate in white glue is a kind of petroleum derivatives) are round particles, the radius of the general particle is between 0.5~5μm.The bonding of objects is achieved by the tension between the polymers in the glue.In the glue, water is the carrier of the polymer, and the water carries the polymer slowly into ...
1.After besmear brushes its film sex is good, the surface after coating solidifies can form uniform rubber shape elastomer, and this kind of coating suits special-shaped structure very much. 3.It is very convenient when construction, suit any besmear to brush means, be it wet surface also can construct. 4.Coating itself is absolutely environmental protection, non-toxic without any smell, the use o...
Finally, ordinary glue products, ordinary glue products have a certain elasticity and softness, and have a good tensile length but tensile strength and strength is not very large, adhesion welcome you to consult, this is our email sales@sinogracechem.com
Composition of pressure sensitive tape 1.Pressure sensitive adhesive, 2.substrate 3.Primer 4.Back treatment agent 5.Isolation paper The main components of the pressure sensitive adhesive and resin, including rubber such as polyacrylic acid ester or polyvinyl ether, homogeneous base material requirements, small scale and good to solvent invasive, including, (1) fabric such as cotton, glass cloth or...
Non-stick pot is cooking will not stick to the bottom of the pot, because the bottom of the pot uses a non-stick coating, the common non-stick can best have teflon coating and ceramic coating. The non-stick pan overcomes all the shortcomings of the traditional pot, easy to clean, a light wipe is clean, non-stick pan can easily fry food without sticking to the bottom, can minimize the oil, the kitc...
Surface treatment of metal materials 1)metal material surface degreasing: organic solvent degreasing alkali degreasing electric degreasing ultrasonic degreasing 2)metal material surface derusting 3)Activation treatment of metal surface 4)Metal surface sandblasting treatment: increase the surface roughness Surface treatment of non-metallic materials 1)Mechanical treatment: sandpaper grinding, etc 2...
First, pour the glue on the flat glass to observe its rheology, and wiggle it to observe its rheology,If the flow of glue is too fast, it means that the glue is too thin and poor, and too thick is not conducive to bonding. Secondly, with a hand dip to observe its viscosity if you can slowly draw, a little sticky hand is better. Then, pour it on a small piece of glass to observe its film forming ti...
The bonding effect can be achieved by applying pressure for a short time (non-aqueous solvent heating) It overcomes the solvent volatilization and drying time needed during the operation of structural adhesive, and can improve the working environment After stripping, it can be corrected without contamination and can be reused for many times Easy to operate, can greatly improve the production effic...
Waterborne polyurethane is often used in the preparation of waterborne coatings because of its excellent film formation and adhesion, excellent flexibility and wear resistance.However, water-based polyurethane dispersion contains a lot of surfactant, easy to produce bubbles, and because of the special properties of water-based polyurethane, it is necessary to use the characteristics of water-based...
Waterborne Acrylic Resin Product Description: The water-based acrylic resin is made of acrylic acid and acrylate monomer through solution polymerization. Product purpose: This product can be used for water-based aluminum foil gloss and ink, water-based gravure printing paper gloss and ink, water-based carton ink manufacturing Product features:alcohol water as the main solvent, has no smell, no tox...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية