Categories
new blog
Water-based paint sticky sticky brush - Ask a water paint expert Problem:Water-based paint, when brushing, paint is easy to stick to the brush, so that the color is not loose. What is this, please? Answer:the reasons why water-based paint is sticky and sticky are as follows 1.High viscosity of water-based paint: if the viscosity of water-based paint is high, the paint will stick to the brush as yo...
Oil pocket phenomenon in water-based paint Problem: To make furniture with transparent colors, in order to save the craft and achieve the purpose of simple construction. We added water-based Color Concentrate to the topcoat for spraying, and the resulting topcoat contained some oil pockets or other unacceptable "face problems." Reply: Aqueous color concentrates are generally made of metal complexe...
Oil pocket phenomenon in water-based paint Problem: To make furniture with transparent colors, in order to save the craft and achieve the purpose of simple construction. We added water-based Color Concentrate to the topcoat for spraying, and the resulting topcoat contained some oil pockets or other unacceptable "face problems." Reply: Aqueous color concentrates are generally made of metal complexe...
Problem：I have not done waterborne polyurethane, the waterborne paint is a rookie .I have never done water - based, water -based is a rookie，I wonder if waterborne polyurethane also needs curing agent? If you want to use it, what is the ratio?Because of the presence of water, is it possible to go back and consume the curing agent?And I want to use this to make the electroplated silver, is it ok? R...
Filming aids in waterborne coatings Problem : Why do you need to add filming aids to one-component waterborne coatings? The emulsion alone does not form a film. Filming aids are added to form a film. Why does the film-forming auxiliary volatilize, which is still a complete film, and is different from a film without a filming aid? Why can't a single emulsion be fused by water to produce a capillary...
Waterborne two-component paint seeds and loss of light - ask water-based paint experts Question: Hello! I have two problems with the double-surface water-based topcoat. One is that when the film is thick, it is easy to produce rash [related to defoaming agent or related to water and curing agent to produce CO2?]. One is a double component. After mixing for 2 hours, it will lose light. What is the ...
Abstract: Reducing the shrinkage of water-based paint film is focused on prevention,designing a rational paint formulation,controlling the paint manufacturing process, and strictly controlling the detection of paint materials, which can reduce the chance of shrinkage. Shrinkage holes have been caused, and it is usually difficult to completely solve them. It is necessary to control the degree of sh...
Water - based coating formulation design system Waterborne coatings, including waterborne wood lacquers, are water-based dispersions and diluents. Unlike conventional solvent-based coatings, the formulation system is a more complex system.When formulating, not only the type of polymer, the properties of the emulsion and the dispersion are concerned. It is also necessary to rationally select variou...
Defoamer is one of the most difficult additives in waterborne wood coatings to control the balance between defoaming and leveling.The paint liquid will generate bubbles during the application due to agitation .If the bubbles present in the paint are not removed in time, the film will dry and form an unacceptable flaw.The paint also produces air bubbles during production, pumping and filling. Defoa...
Character Mineral oil Primer Matte Strong defoaming ability higher price Different product performance differences Large adjustment space Improper selection can cause film defects Influence gloss, flow equality Non-silicone non-oil Various types of coatings, especially in high gloss finishes There are many defoamers on the market, and the choices are very cautious and can be noted in several ways:...
Formulation design system for water based coatings - wetting leveling agent The wetting leveling agent can effectively reduce the surface tension of the system and significantly improve the construction effect of the waterborne wood lacquer.After the addition of the wetting leveling agent, the wetting property and permeability of the paint increase, the leveling property of the paint liquid is imp...
Feature Traditional surfactants (mainly anionic or nonionic) Putty and low-grade system Efficient Reduce static surface tension Good effect on contaminated substrates Easy to cause surface problems Not easy to control High price PSAMS Wide adaptability Common application Minimize possible defects Minimize possible defects Low water sensitivity Low foaming Good dynamic effect expensive visit us sin...
Rheological AIDS provide a leveling effect under high shear conditions, allowing the painted fluid to level out as quickly as possible, reducing brush marks and avoiding spatter. However, as the drying time goes by, this leveling effect weakens and the film is fixed, which can prevent the fluid from sagging on the vertical surface. Rheological additives can be divided into high, medium and low she...
Types, characteristics and applications of main rheological AIDS Variety Feature Application Methyl Cellulose The water system is thickened and has high efficiency, but the water resistance is not good, it is easy to be degraded by microorganisms, moldy and smelly, and the thixotropy after thickening with the system is strong, and the leveling property is not good. Generally not used in waterborne...
The types and functions of surface control agents include: 1.Improve flow and leveling 2.Reduce friction coefficient and increase slip 3.Enhanced scratch resistance 4.Anti-blocking 5.Enhance the arrangement of matte powder, etc. 6.Special feel, such as softness, etc. 7.Others such as improving the water resistance and stain resistance of the coating film On the one hand, they balance the surface t...
Water - based coating formulation design system - matting agent Matting agents are additives used to control the gloss of waterborne wood coatings to meet the broad needs of mainstream matt paints in today's market.The extinction mechanism of the matting agent can be arranged in an orderly manner on the surface of the coating film, so that the surface of the coating film is uneven, causing the lig...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية