Categories
new blog
Waterborne polyurethane (WPU) is a water-based dispersion material, and its unique low viscosity characteristics often bring construction challenges such as flow hanging and penetration. In order to solve these problems and improve its construction performance, self-leveling performance and storage stability, the addition of thickener has become a key step. The thickener not only endows the water-...
Rubber mold, silicone mold, shoe mold, latex pillow mattress mold, anti-stick easy mold Teflon spray, good model flon coating, non-stick mold surface treatment process The role of mold coating Molds are common tools in the manufacturing industry and are used to make a variety of products. In order to capture the service life and production efficiency of the mold, people often coat the surface of t...
The most important difference between non-stick cookware and ordinary cookware is that the surface is coated with a layer of non-stick paint, and the Teflon non-stick cookware commonly used on the market is to coat the main raw material of fluorinated resin such as polytetrafluoroethylene coating on the metal surface such as aluminum, copper or iron, and through sintering. Properties of NI-PTFE co...
In the use of pesticides, only a few cases are the direct use of the original drug, and most of the cases are mixed with other additives and solvents to improve its use value and reduce the cost of use. Surfactant is a kind of additives that can give greater play to the value of pesticides and reduce the cost of pesticides. It plays the role of emulsification, foaming/defoaming, dispersi...
Teflon coating is one of the commonly used protective coatings in metal thermal spraying processing technology services, with good non-stick, wear resistance, corrosion resistance, high temperature resistance and other characteristics, can be applied to carbon steel, stainless steel, aluminum, copper, magnesium and various alloys and other metal materials. It can also be applied to non-metall...
Thermal spray Teflon can not only reduce product costs and improve production efficiency, but also can be used to directly solve problems on the product to improve product quality and increase sales. After being sprayed with Teflon, it has the following characteristics: 1.Slippability: PTFE spray film has a low coefficient of friction. When the load slides, the friction coefficient changes, b...
Many people think that the temperature of the primer baking (dry) of Teflon paint is not important, just bake it, in fact, this is a misunderstanding. If you usually encounter the following situations, please carefully bake the primer. For the primer coating of Teflon paint, we recommend a temperature of 150 ° C, after the workpiece reaches 150 ° C, bake for 5-10 minutes. I. If the temperature of ...
1.Ink The three primary color inks have different degrees of color bias, which will affect the color bias of the whole picture to different degrees. However, a small amount of color bias can be corrected from the ink preparation. When printing to grasp the gray balance of the ink used, the same amount of yellow, product, green do not produce neutral gray, they produce lighter, more turbidity with ...
The hardness and softness of the water-based acrylic resin can be adjusted according to specific needs, but it is usually biased towards the harder side. First, the characteristics and application of water-based acrylic resin Water-based acrylic resin is an environmentally friendly water-based resin, with non-toxic, easy to clean, dry fast and other characteristics, widely used in furniture, packa...
The final state of waterborne polyurethane is a solid film. During the process from emulsion to solid film, accompanied by the evaporation of water and the concentration of water dispersion, the latex particles are close to each other. Before the solid content reaches 74%, the dispersion particles can move in the continuous phase of water. Under the influence of water/air interfacial tension, the ...
Due to the hydrophobic properties of waterborne polyurethane resin, it is difficult to dissolve in water or disperse uniformly, and the high reactivity of isocyanate groups to water, the direct synthesis of waterborne polyurethane faces many challenges. Therefore, to achieve the preparation of waterborne polyurethane, the primary strategy is to cleverly integrate hydrophilic functional groups (suc...
The viscosity of waterborne polyurethane emulsion has different distribution range, and the viscosity of waterborne polyurethane emulsion has different requirements when applied in different fields. In addition to adjusting the viscosity by adding thickening agents, it can also affect the viscosity of waterborne polyurethane emulsion from the molecular structure, including the content of hydrophil...
Water based polyurethane emulsion has soft properties, so that it has good adhesion when attached to the surface of the object; At the same time, it can maintain a certain strength and does not crack. It is especially suitable for articles in high temperature, humid and chemically corrosive environment. This substance also has superior wear resistance and film smoothness, so it can form a uniform ...
Waterborne Polyurethane (WPU) is a polyurethane system using water as a solvent or dispersion medium. In recent years, with the increasingly strict environmental regulations and the improvement of people's environmental awareness, waterborne polyurethane, as an environmentally friendly material, has received extensive attention and research. First, the characteristics of waterborne polyuretha...
①The residual ink is converted into gray black ink According to the principle of color science, the complementary color of the ink mixed together, its hue will become gray black (red + green, yellow + blue-purple). Therefore, we can use this principle to deploy the complementary ink into gray-black ink by deploying the special color ink, and add it to the black ink in a certain proportion to use i...
Pigment is the main component of ink, is a fine powder-like solid colored substance, can show ball, flake and other irregular shape. Generally, the diameter of pigment particles is in the range of several hundred nanometers to tens of microns (10-7~10-5m). The pigment can be evenly dispersed in the medium, but it is insoluble in the medium and does not react with the medium. Pigment is a colored b...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية