Categories
new blog
PCL is a fully degradable polymer with good biocompatibility. When introduced into waterborne polyurethane, it can make waterborne polyurethane have shape memory.Shape memory waterborne polyurethane has attracted wide attention for its shape memory function, temperature sensitivity and moisture permeability. PCL3000 PCL4000 was used as the soft segment, and toluene diisocyanate was used as the har...
Food packaging is divided into ordinary packaging and high-performance packaging, the corresponding waterborne polyurethane adhesive can be divided into four categories: general use, steaming boiling, transparent cooking, aluminum foil cooking.Usually such adhesives are two-component solvent-based polyurethane adhesives, the main agent is polyether or polyester polyol After the aromatic isocyanate...
When waterborne polyurethane is used as adhesive, it must be mixed generally. Based on waterborne polyurethane, crosslinking agent, thickening agent, filler, plasticizer, pigment and other additives can be added. Other types of waterborne resin and water can be added.In order to obtain higher resistance to water Heat resistance and bonding strength, at present a lot of waterborne polyurethane syst...
Waterborne polyurethane adhesive is a kind of high-grade adhesive, with excellent flexibility, impact resistance, chemical resistance and wear resistance, the most important is its low temperature resistance.It has adsorption and chemical bonding effect on many kinds of materials. It can not only bond porous materials, but also bond smooth surface materials. It is widely used. Polyurethane adhesiv...
The most important application indexes of water-based adhesives in the packaging and printing industry mainly include four aspects: bonding strength, high/low temperature resistance, moisture resistance and viscosity holding.In practical application, defects such as weak adhesion and brittle degumming film are basically caused by the above four application indicators are not up to standard.In prac...
Water-based adhesives are environmentally friendly adhesives made of natural or synthetic macromolecule as adhesives and water as solvent or dispersant instead of toxic organic solvents that pollute the environment.Existing water-based adhesives are not 100% solvent-free and may contain limited vocs as additives for their aqueous media in order to control viscosity or fluidity.Advantages are mainl...
Water-based plastic composite ink is a product with water as the solvent. From the perspective of printing mode, water-based ink is not suitable for offset printing at present. Its main application fields are flexographic printing gravure printing and screen printing. Printing costs are related to the raw materials selected by ink manufacturers, such as the size of the molecular weight of the resi...
From the development of printing industry in developed areas of the future development track can be considered in China's packaging and printing industry to take the road of environmental protection is an inevitable trend, and the environmental protection of ink plays an increasingly important role.Although the stage has not yet established green ink or environmental protection ink discrimination ...
Water-based ink resin is suitable for intaglio printing ink. The ink coating prepared with this product has good film forming ability, quick drying, high gloss, high hardness and scratch resistance, good film forming ability on the surface of paper foil and good compatibility with water-based pigment. Application characteristics 1 Good film formation 2 Suitable for a variety of substrates, good ad...
Waterborne polyurethane fabric coating agent can give the fabric a good soft and plump feel and skin feeling, and the anti-wrinkle, anti-shrinkage, resilience and flexure of the coated fabric have been greatly improved, waterproof waterproof polyurethane fabric coating agent has become the fabric manufacturers and consumers favored object.So how does waterborne polyurethane work as a waterproofing...
Adhesives with water (inorganic solvent) as the solvent/carrier are called water-based glues, solute (glue) can be dissolved in water/or dispersed in water,Water-based glue can be miscible and dispersed in water, diluent is water. Adhesives with organic solvents as solvents/carriers are called oil-based adhesives (solvent-based adhesives). Oil-based adhesives are not soluble in water and cannot be...
◆ The procedure of bonding process:◆ The adhesive surface should be evenly coated to ensure infiltration, as far as possible to avoid bubbles, due to the porosity of the adhesive strength greatly reduced, resulting in degumming.Attention should be paid to the alignment of the position, not staggered, can be pressurized, air exclusion, make it close contact. Time is three important parameters of cu...
The chemical composition of glue, the polymer in the water environment glue (vinyl acetate in white glue is a kind of petroleum derivatives) are round particles, the radius of the general particle is between 0.5~5μm.The bonding of objects is achieved by the tension between the polymers in the glue.In the glue, water is the carrier of the polymer, and the water carries the polymer slowly into ...
Finally, ordinary glue products, ordinary glue products have a certain elasticity and softness, and have a good tensile length but tensile strength and strength is not very large, adhesion welcome you to consult, this is our email sales@sinogracechem.com
Composition of pressure sensitive tape 1.Pressure sensitive adhesive, 2.substrate 3.Primer 4.Back treatment agent 5.Isolation paper The main components of the pressure sensitive adhesive and resin, including rubber such as polyacrylic acid ester or polyvinyl ether, homogeneous base material requirements, small scale and good to solvent invasive, including, (1) fabric such as cotton, glass cloth or...
Surface treatment of metal materials 1)metal material surface degreasing: organic solvent degreasing alkali degreasing electric degreasing ultrasonic degreasing 2)metal material surface derusting 3)Activation treatment of metal surface 4)Metal surface sandblasting treatment: increase the surface roughness Surface treatment of non-metallic materials 1)Mechanical treatment: sandpaper grinding, etc 2...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية