-
How Do You Select the Right Tg for a Water-Based Acrylic Label Adhesive
- 2026-07-22 18:56:18
- admin
When formulating a water-based acrylic pressure-sensitive adhesive for labels, Tg is usually one of the first parameters we set. It indicates whether the dry adhesive film will behave relatively soft or firm at a given temperature and influences initial tack, peel adhesion, holding power, low-temperature performance and adhesive ooze. However, Tg alone does not determine whether an adhesive is sui...
-
How to Diagnose Printing Defects on PP, PE and PET Films
- 2026-08-28 17:54:10
- admin
Printing problems on plastic film do not always come from the same part of the process. Ink may shrink immediately after transfer. A printed layer may look normal but fail a tape test after drying. Some problems only appear after water exposure, rubbing or when the press reaches normal production speed. During troubleshooting, it is useful to record when the defect first appears before changing se...
-
How to Choose an Acrylic Resin for Pigment Dispersion in Water-Based Inks
- 2026-11-18 15:19:20
- admin
The right resin for a water-based flexographic or gravure ink depends on where you add it. If you mill dry pigment in-house, look for an acrylic grinding resin that helps wet and disperse the pigment and keeps the concentrate easy to remix after storage. If you buy a ready-made water-based pigment dispersion, start with the letdown binder, the resin you blend into the concentrate to make the finis...