• 2026-06-24 17:17:23
• admin

A fabric coating may look smooth after drying but develop cracks, whitening or peeling when the material is stretched or folded. In many cases, the problem comes from the balance between film hardness, adhesion and elasticity. The film is too hard A hard coating film can provide good surface strength, but it may not be flexible enough for stretch fabrics. When the fabric moves, the coating must mo...

• elastic acrylic binder for fabric
• textile coating resin
• flexible acrylic polymer emulsion

• 2026-08-01 10:23:15
• admin

When UV ink comes off during a tape test, the primer is often blamed first. However, poor adhesion can also result from the film surface, contamination, incomplete primer drying or incorrect UV curing. Here, “adhesion promoter” refers to a primer applied before printing. No single grade is suitable for every plastic film. Choose the Primer by Substrate PET and BOPET films often benefit from a prim...

• BOPP printing primer
• UV ink adhesion promoter
• water-based UV ink primer

• 2026-08-11 18:51:37
• admin

As global environmental regulations such as EU REACH and OEKO-TEX® Standard 100 become increasingly stringent, traditional solvent-based PU systems face growing restrictions in protective glove manufacturing. With advantages such as low VOC emissions and no DMFa residue, waterborne polyurethane (WPU) emulsions are rapidly becoming a key choice for glove manufacturers transitioning from solvent...

• waterborne polyurethane dispersion
• industrial glove coating
• WPU for gloves

• 2026-09-03 15:43:32
• admin

Poor surface smoothness, low gloss, and microscopic pinholes may occur during the spraying and baking of waterborne PTFE non-stick coatings. These defects can allow steam, fats, and corrosive substances to penetrate the coating over time, increasing the risk of blistering, peeling, and reduced non-stick performance. Why Pinholes May Form Pure PTFE has extremely high melt viscosity and limited flow...

• PFA dispersion
• PTFE coating pinholes
• PFA modified dispersion

• 2026-09-30 15:33:07
• admin

Does Your Textile Printing Paste Still Feel Sticky or Crack? This Water-Based PU Resin Combines Softness with High Elongation Manufacturers of textile prints and thick coatings for footwear materials may have encountered these frustrating problems: The printed paste remains sticky after drying and causes blocking when the fabrics are stacked. The coating cracks or peels after several washes. In co...

• Water-Based PU Resin
• Textile Printing Binder
• Waterborne Polyurethane for Textile Coating

• 2026-10-20 10:04:30
• admin

Are you visiting Guangzhou during the Canton Fair? Sinograce Chemical will be in the city fromOctober 22 to 24, 2026, and we would welcome the opportunity to meet and talk about your resin and coating needs. From materials for printing and textiles to surface finishing and non-stick applications, let us use the meeting to explore products relevant to your business. Water-Based Acrylic and Polyuret...

• Canton Fair Guangzhou meetings
• water-based acrylic emulsion
• PTFE PFA FEP PEEK coatings

• 2026-10-28 17:08:51
• admin

A fried egg slides easily off a non-stick pan, yet the coating underneath remains attached to the metal through repeated heating and cooking. This raises an interesting question: if PTFE is known for its exceptionally low adhesion, how can it form part of a durable coating on cookware? The explanation lies in the difference between the surface that contacts food and the interface that bonds with t...

• PTFE coating adhesion
• PTFE coating peeling
• cookware coating