-
How to Choose the Right Water-Based Resin for Your Application
- 2026-08-05 17:59:28
- admin
Choosing a water-based resin should begin with the application, not with viscosity, solids content, or price. Products with similar technical data can behave very differently in production. A resin may work well on paper but show weak adhesion on plastic film. A coating may form properly under heated drying but remain tacky at room temperature. A low-viscosity polyurethane dispersion may look too ...
-
How to Choose a Waterborne Polyurethane Dispersion for Industrial Glove Coatings
- 2026-08-11 18:51:37
- admin
As global environmental regulations such as EU REACH and OEKO-TEX® Standard 100 become increasingly stringent, traditional solvent-based PU systems face growing restrictions in protective glove manufacturing. With advantages such as low VOC emissions and no DMFa residue, waterborne polyurethane (WPU) emulsions are rapidly becoming a key choice for glove manufacturers transitioning from solvent...
-
How to Reduce Pinholes in PTFE Coatings with PFA 001 Dispersion
- 2026-09-03 15:43:32
- admin
Poor surface smoothness, low gloss, and microscopic pinholes may occur during the spraying and baking of waterborne PTFE non-stick coatings. These defects can allow steam, fats, and corrosive substances to penetrate the coating over time, increasing the risk of blistering, peeling, and reduced non-stick performance. Why Pinholes May Form Pure PTFE has extremely high melt viscosity and limited flow...
-
Celebrating the Mid-Autumn Festival at Sinograce Chemical
- 2026-09-30 10:33:06
- admin
The Mid-Autumn Festival is a time for family, reunion, and sharing good wishes. At Sinograce Chemical, it is also a chance to thank the people behind our work. Our team develops and supplies water-based acrylic emulsions, polyurethane dispersions, adhesives, and functional coatings for a range of applications. Every product recommendation, sample, and customer project depends on the care of our co...
-
Can Waterborne PUD Be Blended with NBR Latex for Glove Dipping
- 2026-10-10 16:18:43
- admin
Waterborne Polyurethane (PUD) × NBR Latex: Verified Compatibility for Water-Based Polymer Blending How can polyurethane and nitrile rubber latex work together to develop high-performance water-based formulations? Waterborne polyurethane dispersion (PUD/WPU) and nitrile butadiene rubber (NBR) latex each offer valuable properties for industrial applications. Combining them can create new opportuniti...
-
Why Does Exterior Acrylic Paint Leave Rain Streaks Even When It Feels Dry
- 2026-10-16 11:18:09
- admin
The wall feels dry, but after a light shower, visible streaks appear. Some areas may also look glossier than the surrounding surface. Does this mean the acrylic emulsion has poor water resistance, or could the additive package be contributing to the problem For exterior paint formulators, the starting point is to examine the formulation and drying conditions together. Why a Dry Surface May Still B...
-
Visiting Guangzhou During the Canton Fair — Meet Us to Discuss Resins and Coatings
- 2026-10-20 10:04:30
- admin
Are you visiting Guangzhou during the Canton Fair? Sinograce Chemical will be in the city fromOctober 22 to 24, 2026, and we would welcome the opportunity to meet and talk about your resin and coating needs. From materials for printing and textiles to surface finishing and non-stick applications, let us use the meeting to explore products relevant to your business. Water-Based Acrylic and Polyuret...
-
Why PTFE Coatings Release Food but Adhere to Metal: The Role of Primer Resins
- 2026-10-30 11:18:53
- admin
A fried egg slides easily off a non-stick pan, yet the coating underneath remains attached to the metal through repeated heating and cooking. This raises an interesting question: if PTFE is known for its exceptionally low adhesion, how can it form part of a durable coating on cookware? The explanation lies in the difference between the surface that contacts food and the interface that bonds with t...
-
Why Do Water-Based Emulsions Break, and How Can You Prevent It
- 2026-11-11 11:20:35
- admin
Water-Based Emulsion Breaking: Common Causes and Prevention Emulsion breaking is a stability problem that can occur during the storage and use of water-based polymer emulsions. It may appear as particle aggregation, coagulation or irreversible separation, affecting processing and product consistency. 1. Common Causes of Emulsion Breaking Temperature Stress Prolonged exposure to high temperatures m...
-
How to Choose an Acrylic Resin for Pigment Dispersion in Water-Based Inks
- 2026-11-18 15:19:20
- admin
The right resin for a water-based flexographic or gravure ink depends on where you add it. If you mill dry pigment in-house, look for an acrylic grinding resin that helps wet and disperse the pigment and keeps the concentrate easy to remix after storage. If you buy a ready-made water-based pigment dispersion, start with the letdown binder, the resin you blend into the concentrate to make the finis...