• 2026-04-23 15:31:36
• admin

Many people find themselves torn when selecting materials: since both are used for coatings, which one offers greater durability? Which is the more suitable choice for waterproofing during renovation? In reality, neither possesses an absolute advantage over the other; the key lies in the specific requirements of the application scenario. Today, we will clarify the core distinctions between the two...

• polyurethane rubber
• polyurethane dispersion
• acrylic polymer

• 2026-07-16 15:53:46
• admin

Waterborne polyurethane dispersions, commonly known as PUDs, may appear milky white, translucent, or slightly bluish in the liquid state. This difference is mainly related to particle size, particle size distribution, and how strongly the dispersed particles scatter visible light. In general, milky dispersions scatter more light, while finer dispersions allow more light to pass through. However, a...

• PUD
• polyurethane dispersions
• waterborne polyurethane

• 2026-08-05 17:59:28
• admin

Choosing a water-based resin should begin with the application, not with viscosity, solids content, or price. Products with similar technical data can behave very differently in production. A resin may work well on paper but show weak adhesion on plastic film. A coating may form properly under heated drying but remain tacky at room temperature. A low-viscosity polyurethane dispersion may look too ...

• water-based resin
• Polyurethane dispersions
• Acrylic emulsions