Categories
new blog
First: Teflon coating introduction Industrial Teflon coating is suitable for plastic rubber mold, ball mold, glove mold, latex mold, roller, conveyor belt, mechanical parts and other surface treatment, containing "FEP" and "PTFE" polytetrafluoroethylene ingredients with high-performance resin, divided into the bottom coating and surface coating a total of two layers, has the best anti-corrosion, h...
The primer sprayed on the plastic surface can promote the effective adhesion between the glue and the material, increase the adhesion between the adhesive and the plastic, and solve the problem of degumming, and the main role of the primer is to solve the problem of degumming in the adhesive process. One: The definition of primer? The base coating agent is a base coating treatment agent that assis...
The foam problem in water treatment has troubled many people, debuting the initial foam, surfactant foam, impact foam, peroxide foam, circulating water treatment with non-oxidizing fungicide generated foam, etc., so the use of defoamer in water treatment is more common, this article comprehensively introduces the principle, classification, selection and dosage of defoamer! Methods of foam eliminat...
Non-stick coating refers to the coating formed after coating with low surface energy, easy to clean and other characteristics of the coating, which is widely used in all kinds of food contact, hardware products, mechanical parts, chemical equipment, electrical equipment. Non-stick pans are also the most widely recognized non-stick paint application scenarios. 1. non-stick coating has fluorine resi...
First, environmental performance VOC content Needless to say, water-based wood paint is perfect in this respect, water-based wood paint is based on water as a solvent with ultra-low VOC content, and will not produce pungent odor during construction. Nitrocellulose paint and polyester paint add organic solvents, and their products contain benzene, toluene, xylene and its derivatives, whic...
The difference between water-based paint and paint: Compared with paint, water-based paint, its wear resistance, and aging resistance have been significantly improved, compared with traditional paint, water-based paint is more affordable, more easily used by people, and less harmful. Water-based paint, water as diluent, with wear-resistant, aging resistance, easy to use and other characteristics, ...
There are four common waterborne polyurethane thickeners: ①Inorganic thickeners, such as flake silicates, fumed silica, etc.; ②Natural organic thickeners, such as cellulose ethers; ③Synthetic organic thickeners, such as polyacrylates, polyvinylpyrrolidone; ④associative thickener. This paper mainly introduces the associated emulsion thickener. Associative emulsion thickeners are non-ionic synthetic...
In gravure printing, ink resolubility is also a key indicator to test the performance of ink. Especially in the color ink printing, the moderate resolubility can not only make the color fully displayed, but also solve the problem of shallow plate mesh blocking and overprinting cross-color. In color ink printing, according to the different hue requirements, the depth of the ink hole mesh of the pri...
In order to prevent ink delamination and pigment precipitation, users must be fully stirred before printing. The following summarizes the faults and elimination methods of screen printing ink in use for your reference. 1.Poor adhesion: the reason is improper selection of ink, insufficient pre-press treatment, impurities in the substrate, insufficient drying temperature, insufficient time, improper...
With the development of the application of digital inkjet printing technology in the clothing industry, environmental monitoring is more stringent and the demand for small batch production and personalized customization is increasing. Therefore, the requirements for textile coating ink are becoming higher and higher, and the raw materials for the production of textile coating ink are bec...
What is a peelable resin? Strippable resin is a special resin material with strippable properties (also known as removable film resin). It is often used in the preparation of protective films for electronic products, packaging of semiconductor devices, etc., which can protect these products more intact, and it is easy to peel off when it needs to be replaced or disassembled. When prepari...
As an important material for printing, ink is composed of resin, pigment, filler and auxiliary. Due to many industries such as books, packaging, construction, and circuit boards, with the gradual increase in social demand, the use of ink is also increasing. However, in the production and use of ink, due to the addition of surfactants, equipment stirring operation and environmental changes will cau...
Color paste, also known as pigment paste, is an important form of dye application, which is widely used in textile, ink, paint and other industries. In the classification of pastes, low-halogen pastes and ordinary pastes are two common types. They have certain differences in composition, performance and use, and the differences between the two types of pastes will be discussed in detail below. Fir...
PTFE coatings (polytetrafluoroethylene) are non-stick, fluoropolymer containing high temperature coatings, they have a single coating system or a double coating system of primer and top coat, and have a variety of properties. The Teflon spray process is an important surface treatment that gives objects outstanding properties. With the right preparation, spraying procedures and techniques, Teflon s...
Rubber mold, silicone mold, shoe mold, latex pillow mattress mold, anti-stick easy mold Teflon spray, good model flon coating, non-stick mold surface treatment process The role of mold coating Molds are common tools in the manufacturing industry and are used to make a variety of products. In order to capture the service life and production efficiency of the mold, people often coat the surface of t...
The most important difference between non-stick cookware and ordinary cookware is that the surface is coated with a layer of non-stick paint, and the Teflon non-stick cookware commonly used on the market is to coat the main raw material of fluorinated resin such as polytetrafluoroethylene coating on the metal surface such as aluminum, copper or iron, and through sintering. Properties of NI-PTFE co...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية