Categories
new blog
1.The role of acrylic resins in photocured inks.Acrylic resin is widely used in the manufacture of photocuring inks because of its unsaturated property and polymerization reaction under the action of ultraviolet light.It and other substances, such as polyether, carbamate, polyester, epoxy resin, modified epoxy resin, poly caprolactam copolymer, can be used as a photocuring ink resin component. 2.T...
Polyurethane is the short form of polyurethane (PU). It is a block polymer formed by addition polymerization. It is a polymer compound with flexible and elastic polyether or polyester as soft segment and rigid and hard carbamate as hard segment. It contains a considerable number of ammonia ester bonds. Waterborne polyurethane has been successfully applied in the textile printing and dyeing industr...
The addition of wetting dispersant has obvious effect on the foam of some water-based ink.For example, polyacrylic acid wetting dispersants foam more than other types of wetting dispersants.Generally speaking, wetting dispersant foam with low dispersion capacity is also less. If diisobutyl sulfonate is based on disate, there is little foam at its content of 0.1-0.25%. The use of thickeners will ma...
Water based adhesive Water-based adhesive refers to the water-soluble polymer dissolved into appropriate concentration of aqueous solution, or insoluble polymer dispersed into micro-particles (emulsion) in water with the help of surfactant in the general term of adhesives;In simple terms, adhesives made of materials that can be dispersed or dissolved in water are aqueous adhesives and are often re...
With the continuous improvement of people's demand for life, glue and adhesive products are also advancing with The Times and constantly upgrading to meet people's needs. The emergence of removable glue greatly satisfies this phenomenon, so what is removable glue? What are the characteristics of removable glue? Removable adhesive is a new type of environmentally friendly synthetic material, the ap...
①BOPP / VMCPP The composite structure is mainly used in the field of light food packaging such as instant noodles, egg yolk pie and snow cake. The composite structure is most suitable for one-component aqueous adhesives. Compared with solvent-based polyurethane adhesive, single component water glue less ink transfer phenomenon, and the initial adhesion is high, without aging, can be directly cut b...
Pressure sensitive adhesive (PSA) is a self-adhesive material, only need to apply a small pressure, can form a van der Waals force on the surface of the two objects, and the adhesive is firmly bonded, this pressure sensitive bonding performance is its basic feature, is also different from other adhesives typical characteristics. PSA can be divided into solution type, emulsion type, photocuring typ...
Composition of adhesive Adhesives are adhesives that can bond two objects together, referred to as glue. There are different types of adhesives according to different divisions, the use of adhesives is also quite extensive, and now it has been filled in our lives, for adhesives, do you know how it is composed? How adhesives are composed: Synthetic adhesive Synthetic adhesive is composed of main ag...
Water-based pressure-sensitive adhesive is a type of adhesive that uses water as a solvent and is pressure-sensitive, that is, it can adhere quickly to the surface when slight pressure is applied. Due to its environmental protection, non-toxic, cost-effective, adjustable viscosity and other advantages, it has gradually become the mainstream product in the pressure sensitive adhesive market. Accord...
With the development of the market economy, the demand for flexible packaging in various industries is also rising year by year. The development of flexible packaging materials and processing technology continue to improve, flexible packaging in many areas is playing an increasingly important role, so what are the composite ways of flexible packaging? This article briefly describes five composite ...
The foam problem in water treatment has troubled many people, debuting the initial foam, surfactant foam, impact foam, peroxide foam, circulating water treatment with non-oxidizing fungicide generated foam, etc., so the use of defoamer in water treatment is more common, this article comprehensively introduces the principle, classification, selection and dosage of defoamer! Methods of foam eliminat...
Advantages and disadvantages of the same type of defoamer Organic defoamer such as mineral oils, amides, low alcohols, fatty acids, fatty acid esters and phosphate esters has been studied and applied earlier, belonging to the first generation of defoamer, which has the advantages of easy access to raw materials, high environmental performance and low production cost.The disadvantages are low defoa...
LABELEXPO Europe-2023 exhibition at Place de Belgique 1 BE - 1020 BrusselsSept.11th -Sept.14th, 2023 At Labelexpo Europe 2023, view hundreds of live demonstrations of the latest innovations, examine the most advanced collection of label and package printing technologies and acquire what your business needs to succeed. Explore the world’s largest label and package printing trade show and advance te...
1 Fluorescent ink: Fluorescent ink is made of fluorescent material dissolved in the corresponding resin. The particles of fluorescent pigments are generally thicker, the types of bonding materials are more, different bonding materials will produce different fluorescence, in the use of fluorescent ink should ensure that it has sufficient concentration, the ink layer on the printing product is thick...
Pigment printing The printing method of coating printing is that the non-water-soluble substance particles with color or special effect are adhered to the fiber/fabric surface with a polymer adhesive to form the desired pattern. Paint printing characteristics 1.the process is simple and convenient, wide applicability to fibers; 2.Complete chromatography, bright color; 3.Clear outline and distinct ...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2026 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.
top
English
français
русский
español
العربية