Categories
Finally, ordinary glue products, ordinary glue products have a certain elasticity and softness, and have a good tensile length but tensile strength and strength is not very large, adhesion welcome you to consult, this is our email sales@sinogracechem.com
Composition of pressure sensitive tape 1.Pressure sensitive adhesive, 2.substrate 3.Primer 4.Back treatment agent 5.Isolation paper The main components of the pressure sensitive adhesive and resin, including rubber such as polyacrylic acid ester or polyvinyl ether, homogeneous base material requirements, small scale and good to solvent invasive, including, (1) fabric such as cotton, glass cloth or...
The bonding effect can be achieved by applying pressure for a short time (non-aqueous solvent heating) It overcomes the solvent volatilization and drying time needed during the operation of structural adhesive, and can improve the working environment After stripping, it can be corrected without contamination and can be reused for many times Easy to operate, can greatly improve the production effic...
Waterborne polyurethane is often used in the preparation of waterborne coatings because of its excellent film formation and adhesion, excellent flexibility and wear resistance.However, water-based polyurethane dispersion contains a lot of surfactant, easy to produce bubbles, and because of the special properties of water-based polyurethane, it is necessary to use the characteristics of water-based...
In the process of coating manufacturing, it is necessary to belong to the hydrophilic polar material Yan, fillers dispersed to belong to the hydrophobic non-polar material organic base material.In order to increase the affinity between inorganic matter and organic polymer, it is generally necessary to use coupling agent or other surfactants to treat the surface of inorganic matter, so that it chan...
Compared with traditional glue, water-based coated glue is made of imported raw materials, with high solid content, low viscosity, good process applicability, strong adhesive force, non-toxic and other advantages are suitable for aluminum foil (OPA), pretreated polyethylene (HDPE,LDPE), polypropylene (OPP, CPP), polyester (PET), polyamide (PA,ONY) film, A two-component solvent-based polyurethane a...
The appearance of non-stick pan provides conditions for healthy cooking with less oil, and also makes cooking utensils more convenient to clean. However, in the non-stick frying pan into life at the same time, the safety of its coating has never been questioned.There are two main coating processes for non-stick frying pans: one is the traditional coating process, Teflon coating (PTFE); The second ...
Water-based single-component protective film adhesive is an environmentally friendly adhesive prepared by using natural polymer or synthetic polymer as adhesive and water as solvent or dispersant instead of toxic organic solvents that pollute the environment.Existing water-based adhesives are not 100% solvent-free and may contain limited volatile organic compounds as additives to their water-based...
Water-based glue, when the autumn and winter season, special attention should be paid to anti-freezing treatment, according to different temperatures, the implementation of different solutions. Cautions (1) Pay attention to warmth and anti-freezing when transporting glue: when transporting below 0℃, pay attention to the warmth of the vehicle, and transport below -5℃ is prohibited; (2) Ke...
Protective film glue transfer, there are a variety of factors, I believe that in the work, many teachers will also encounter a similar situation.The phenomenon of the so-called glue transfer is uneven coating or in the process of transportation, the glue shift remains on the surface of the profile, commonly known as glue transfer. Protective film glue transfer can be divided into the followin...
Anti -deformation power Anti -deformation capacity refers to a certain deformation after the composite product is affected by external forces, and this deformation will produce a certain amount of elasticity, especially the thin film. If the combination of composite is not enough to resist the elasticity of the return, foaming will occur, etc. Happening. There are many processes that produce defor...
Thirteen.Skinning There are two common skin phenomena: one is in the packaging bucket of glue surface skin, the other is in the glue tray surface skin. ■ The surface layer of glue in the packing bucket produces crusts 1)If the temperature of glue filtration packaging is too high, it is easy to form crust in the barrel when the temperature drops, which is common in high temperature in summer. Becau...
During December 10, 2022, customers from Russia have come to visit our company. Foreign trade manager and relevant personnel warmly welcome our customers, and introduced our product which they are interested in detailedly. Water based glue
Classification and characteristics of screen-printable pressure sensitive adhesives I.Characteristics and performance requirements of screen printing process Screen printing is through a certain pressure to make the printing base material through the holes of the plate to the substrate, the formation of an image or text. In order to achieve good printing adaptability, the physical properties of sc...
Classification and characteristics of screen-printable pressure sensitive adhesives Ⅱ Classification of screen-printable pressure sensitive adhesives Because of the simple screen printing equipment, convenient operation, simple printing, plate making and low cost, for the application of coating pressure sensitive adhesive, also often consider the use of screen printing process to coating.The ...
Screen printing UV pressure sensitive adhesive and screen printing water-based pressure sensitive adhesive, has the following different characteristics: because UV curable pressure sensitive adhesive does not contain water or organic solvent, so it can be cured without heating drying channel, and water-based pressure sensitive adhesive to water as diluent, need a lot of heat to volatilizing water;...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية