Categories
new blog
Water-based ink resin is suitable for intaglio printing ink. The ink coating prepared with this product has good film forming ability, quick drying, high gloss, high hardness and scratch resistance, good film forming ability on the surface of paper foil and good compatibility with water-based pigment. Application characteristics 1 Good film formation 2 Suitable for a variety of substrates, good ad...
After toning water-based plastic composite ink is used, there is often error with the standard color, which is difficult to completely avoid the problem, can only be reduced to a low limit. Different printing ink factory use of the same part of the printing machine, different printing machine mesh mesh line number Angle has a big difference, which makes the same ink, in different printing methods ...
Waterborne polyurethane fabric coating agent can give the fabric a good soft and plump feel and skin feeling, and the anti-wrinkle, anti-shrinkage, resilience and flexure of the coated fabric have been greatly improved, waterproof waterproof polyurethane fabric coating agent has become the fabric manufacturers and consumers favored object.So how does waterborne polyurethane work as a waterproofing...
Acrylic pressure sensitive adhesive is a large range, PUR is one of them, most of the acrylic pressure sensitive adhesive is heated operation, can be reheated after bonding, is reversible.And PUR is wet reaction acrylic pressure sensitive adhesive, heating operation, after bonding and moisture in the air reaction, after the reaction is irreversible (that is, heating will not melt). So PUR is more ...
◆ The procedure of bonding process:◆ The adhesive surface should be evenly coated to ensure infiltration, as far as possible to avoid bubbles, due to the porosity of the adhesive strength greatly reduced, resulting in degumming.Attention should be paid to the alignment of the position, not staggered, can be pressurized, air exclusion, make it close contact. Time is three important parameters of cu...
Composition of pressure sensitive tape 1.Pressure sensitive adhesive, 2.substrate 3.Primer 4.Back treatment agent 5.Isolation paper The main components of the pressure sensitive adhesive and resin, including rubber such as polyacrylic acid ester or polyvinyl ether, homogeneous base material requirements, small scale and good to solvent invasive, including, (1) fabric such as cotton, glass cloth or...
As we all know, with the development of society, people attach importance to food safety and so on, label printing is greatly encouraged, and label has become comparable to packaging. The development of label has driven the development of label printing, and ink is the main medicine in label printing,In the field of label printing, ink can be generally divided into three categories, namely: water-...
(1)The labels on the market (especially film labels) mostly use screen printing and flexographic printing, which not only has a complex processing process, a long cycle, but also has poor timeliness. (2)In terms of product design, the selection of design scheme needs to be modified repeatedly, which is not only troublesome, but also costly (3)The traditional printing method to achieve variable dat...
The bonding effect can be achieved by applying pressure for a short time (non-aqueous solvent heating) It overcomes the solvent volatilization and drying time needed during the operation of structural adhesive, and can improve the working environment After stripping, it can be corrected without contamination and can be reused for many times Easy to operate, can greatly improve the production effic...
Waterborne polyurethane is often used in the preparation of waterborne coatings because of its excellent film formation and adhesion, excellent flexibility and wear resistance.However, water-based polyurethane dispersion contains a lot of surfactant, easy to produce bubbles, and because of the special properties of water-based polyurethane, it is necessary to use the characteristics of water-based...
Water-based ink is composed of resin (water-soluble resin colloidal dispersion emulsion polymer) aqueous amine (mainly ammonia) pigment (organic pigment inorganic pigment) and additives.The so-called water-based ink is mainly water as a solvent by scientific processing, compared with other printing ink, water-based ink, because it does not contain volatile toxic organic solvents, so in the printin...
Plastic film as the object of packaging printing, many kinds, and the use of printing also involves many aspects, so the variety of this kind of ink is extremely wide.In particular, this ink shall have the characteristics of fastness to adhesion printing effect processing tolerance and other requirements.The surface of plastic film is smooth, and the ink can not be permeated, so it must be printed...
Printing pressure has a great influence on printing quality.Maintaining an average and constant printing pressure in the effective printing area can not only make the printing ink uniform, small color difference, but also keep the size of the printing mark.It is feasible to achieve maximum flat flat printing printing pressure But because it is the manufacturing precision of printing plate flatness...
Surfactants are a large group of organic compounds, their properties are very characteristic, application is extremely flexible, extensive, has great practical value. Surfactants have been as emulsifier, detergent, wetting agent, penetrating agent, foaming agent, solvent, dispersant, suspending agent, cement water reducing agent, fabric softener, leveling agent, fixing agent, fungicide, catalyst, ...
Polyurethane sealant is widely used in civil construction, transportation and other industries: Applications in construction - filling and sealing of doors and Windows, glass, etc.; Applications in civil engineering - caulking sealing of expressways, Bridges and airstrips; Automotive applications - Assembly and sealing of Windows (mainly windshield). Polyurethane sealant has many excellent charact...
What is a coupling agent? Coupling agent is a class of substances with amphoteric structure, a part of their molecules coupling agent is a class of substances with amphoteric structure, a part of their molecules can be divided into groups and inorganic surface chemical groups reaction, forming chemical bonds; The groups can react with the chemical groups on the inorganic surface to form chemical b...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية