Categories
new blog
First, material selection and preparation To make the resin crack effect, you first need to prepare the resin and pigment. Resin selection of high transparency, high hardness, wear resistance products, pigments can choose mineral pigments or metal pigments, you can also add a small amount of color pigments to prepare a rich color. Second, color mixing Mix the paint into the resin one by one and st...
Leather surface treatment agent Matte resin is a surface treatment agent, mainly used to add a matte effect to the leather surface. The principle is to form a layer of tiny particles on the surface of the leather material, and the refracted light is dispersed, making the surface appear matte. Automotive interior leather market demand analysis As a high-grade and beautiful material, leather has a w...
Different processing methods will cause different fault manifestations, the following we mainly analyze the causes of paper thermit sealing delamination phenomenon under the gravure and solvent-free composite processing methods. The YBB paper aluminum-plastic composite film standard does not specify the composite strength index of the paper aluminum layer in the paper aluminum-plastic composite fi...
The OPP,PET film substrate | is an environmentally friendly coating using advanced material technology, which can significantly enhance the adhesion of EVA on difficult PET substrates and improve the product quality of PE card film. Card film, also known as plastic film, is a plastic film product coated with adhesive and OPP and PET as the substrate, which is widely used in the storage and protect...
The high adhesion base coating improves the adhesion of the inkjet coating on PP paper Prevent ink from penetrating into PP composite paper substrate Fast drying speed to meet the needs of production line Good weather resistance, no yellowing Easy to use, safe and environmentally friendly Anhui sinograce company's PP composite paper digital inkjet coating adhesive base | Inkblot coating base ...
Many people think that the temperature of the primer baking (dry) of Teflon paint is not important, just bake it, in fact, this is a misunderstanding. If you usually encounter the following situations, please carefully bake the primer. For the primer coating of Teflon paint, we recommend a temperature of 150 ° C, after the workpiece reaches 150 ° C, bake for 5-10 minutes. I. If the temperature of ...
1.Ink The three primary color inks have different degrees of color bias, which will affect the color bias of the whole picture to different degrees. However, a small amount of color bias can be corrected from the ink preparation. When printing to grasp the gray balance of the ink used, the same amount of yellow, product, green do not produce neutral gray, they produce lighter, more turbidity with ...
Insufficient or uneven amount of glue due to insufficient amount of glue produced by the white spot can be observed in the composite machine. In the dry composite process, the coated adhesive must be able to fill the bumps and bumps on the surface of the ink and film to avoid appearance defects such as obvious white spots. When the water-based adhesive dry composite is used to produce lightweight ...
The hardness and softness of the water-based acrylic resin can be adjusted according to specific needs, but it is usually biased towards the harder side. First, the characteristics and application of water-based acrylic resin Water-based acrylic resin is an environmentally friendly water-based resin, with non-toxic, easy to clean, dry fast and other characteristics, widely used in furniture, packa...
The final state of waterborne polyurethane is a solid film. During the process from emulsion to solid film, accompanied by the evaporation of water and the concentration of water dispersion, the latex particles are close to each other. Before the solid content reaches 74%, the dispersion particles can move in the continuous phase of water. Under the influence of water/air interfacial tension, the ...
Due to the hydrophobic properties of waterborne polyurethane resin, it is difficult to dissolve in water or disperse uniformly, and the high reactivity of isocyanate groups to water, the direct synthesis of waterborne polyurethane faces many challenges. Therefore, to achieve the preparation of waterborne polyurethane, the primary strategy is to cleverly integrate hydrophilic functional groups (suc...
The viscosity of waterborne polyurethane emulsion has different distribution range, and the viscosity of waterborne polyurethane emulsion has different requirements when applied in different fields. In addition to adjusting the viscosity by adding thickening agents, it can also affect the viscosity of waterborne polyurethane emulsion from the molecular structure, including the content of hydrophil...
Water based polyurethane emulsion has soft properties, so that it has good adhesion when attached to the surface of the object; At the same time, it can maintain a certain strength and does not crack. It is especially suitable for articles in high temperature, humid and chemically corrosive environment. This substance also has superior wear resistance and film smoothness, so it can form a uniform ...
①The residual ink is converted into gray black ink According to the principle of color science, the complementary color of the ink mixed together, its hue will become gray black (red + green, yellow + blue-purple). Therefore, we can use this principle to deploy the complementary ink into gray-black ink by deploying the special color ink, and add it to the black ink in a certain proportion to use i...
Paper aluminum-plastic composite film in the actual application of medical packaging powder, granule packaging products compared to the plastic aluminum-plastic packaging commonly used in the market now has the following advantages: (1)The mechanical strength of the paper is high, the rigidity is good, and the ability to maintain the bag after forming is strong, which improves the cleanliness of t...
Most coatings are composed of a base material (one or more resin mixtures), pigments (including physical pigments and functional pigments), solvents and some small amounts of additives and other coating raw materials. In the production of coatings, after the selection of various coating raw materials necessary for coating components, the next is how to make reasonable use of the technical and econ...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية