Categories
new blog
Adhesives can be used to bond metal, glass, wood, paper, fiber, rubber, plastic and other materials together to produce a function or performance greater than the sum of its part and the whole. Adhesive bonding method is increasingly replacing the mechanical coupling method, which is mainly due to the adhesive bonding method has the following advantages. (1) Film, fiber and small particles an...
Adhesives can be used to bond metal, glass, wood, paper, fiber, rubber, plastic and other materials together to produce a function or performance greater than the sum of its part and the whole. Adhesive bonding method is increasingly replacing the mechanical coupling method, which is mainly due to the adhesive bonding method has the following advantages. (1) Film, fiber and small particles an...
The rubber pressure-sensitive adhesive in addition to the main components of rubber, while adding a thickening resin, plasticizers and so on. The rubber type pressure-sensitive adhesive is made of rubber elastomer, thickener, softener, antioxidant and other components dissolved in the preparation of solvent.In addition to resin, resin pressure-sensitive adhesive must also add to defoamer.Wett...
Water-based pressure sensitive adhesive Typical varieties are: transparent sealing tape, electrical insulation tape, masking tape, surface protection tape, double-sided tape, metal foil tape, pipe anti-corrosion tape, logo tape (printing tape), silicone heat- Conductive tape, shock absorptive tape, medical tape, transfer tape, adhesive labels, stationery adhesive films, advertising adhesive f...
All kinds of sealing tape, transparent tape, packaging tape, bopp tape products,regardless of its type and use, it is made up of three parts: the substrate (rarely the substrate), the pressure sensitive adhesive, the release paper or the separation film. The production process of sealing tape, transparent tape, packaging tape, bopp tape: The pressure-sensitive adhesive is coated on the corona...
With the gradual improvement of national living standards, people on the printing and packaging of exquisite, green and other requirements are getting higher and higher, thus driving the printing and packaging industry to flourish, but also led to a large number of productions about adhesive which is used for printing. One of the water-based adhesive with its water-based environmental protect...
The method to determine whether the quality of the seal printing tape is poor: Ordinary sealing tape glue is acrylic glue, also known as pressure-sensitive adhesive, the main component is tincture. Tincture is a kind of macromolecular active substance. The activity will be affected by the level of temperature. Tincture content of glue will directly affect the use of tape. Some individuals thi...
Classification and quality requirements of BOPP sealing tape (including ordinary sealing tape, printing tape, high-viscosity antifreeze tape):The series of products mainly to polypropylene film, special polypropylene film, acrylic and water-based acrylic plastic as raw materials and has the characteristics of posting smooth. It is suitable for general packaging and fixed and packaging an...
Composition of pressure sensitive tape 1.Pressure sensitive adhesive, 2.substrate 3.Primer 4.Back treatment agent 5.Isolation paper The main components of the pressure sensitive adhesive and resin, including rubber such as polyacrylic acid ester or polyvinyl ether, homogeneous base material requirements, small scale and good to solvent invasive, including, (1) fabric such as cotton, glass cloth or...
The bonding effect can be achieved by applying pressure for a short time (non-aqueous solvent heating) It overcomes the solvent volatilization and drying time needed during the operation of structural adhesive, and can improve the working environment After stripping, it can be corrected without contamination and can be reused for many times Easy to operate, can greatly improve the production effic...
Water-based adhesive with high polymer, water-soluble resin as the main raw materials, water as the solvent, less odor, environmental protection. With the continuous improvement of people's environmental awareness, water-based adhesives have become the mainstream of the market in recent years. Characteristics of water-based adhesive 1.Applicable to the substrate any kind of adhesive is not om...
The composition structure of pressure sensitive tape Under normal circumstances, the composition of single-sided tape structure is: the release of the substrate, adhesive. The following image: Categories of adhesives and their respective properties The main adhesives are acrylic rubber, natural rubber, synthetic rubber, silicone and so on. For different application requirements, coating on the est...
Specialty tapes have a variety of uses, such as automotive, construction and medical. Each application has different requirements, and for the tape industry, we have developed polymer dispersions for different specialty tape pressure-sensitive adhesive coatings, direct coating adhesive formulations and UV curable acrylic hot melt adhesives.From polymer design to odor removal technology, we focus o...
Welcome to Sinograce, a leading brand in the chemical coating industry. In this SEO-optimized article, we will explore the world of BOPP lamination glue and adhesive tape glue, with a focus on Sinograce's exceptional BOPP acrylic clear adhesive. As a trusted manufacturer in the field, Sinograce offers innovative adhesive solutions that enhance the performance and durability of BOPP tapes. Througho...
1
adminpagesCopyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top