• 2017-07-29 09:26:37
• admin

At present, nearly half of all aircrafts flying in the sky are being leased by airline companies from aircraft leasing companies. Renting a standard white plane and modifying the logo is significantly more economical and convenient than redrawing the entire aircraft, what's more, some aircraft leasing companies are not allowed hire debit to change the color of the aircraft. Expensive decoration Th...

• Plans paint
• more fuel consumption
• higher cost

• 2019-07-20 17:02:42
• admin

March 10, 2018，Anhui sinograce Chemical Co., Ltd held an event launching ceremony of “2018 Orange War” in Hefei Big Shu mountain.

• 2018 Orange War
• sinogracechem
• We continue to fight

• 2019-03-13 09:38:42
• admin

Water-in-water multi-color paint spray guns to use most of the spray, for the operation, but also because of the improper use of the gun caused by uneven distribution of the coating,the following together to see how to solve it. The smaller the gun distance, the greater the pressure of the spray, the greater the impact of the product by the pressure of the water, water-in-watercolorful paint coati...

• STYRENE ACRYLIC EMULSION FOR REAL STONE PAINT
• Architectural Coatings
• modified silicone acrylic emulsion,

• 2020-02-29 17:42:30
• admin

water-based resin | water-based industrial coating (a) water paint common problems Common problems with water-based lacquer wood paint: transparency, Color fullness of shade The complaint that often hears about paint of ability in water is paint of ability in water diapure is poor, cannot show the plump godliness of woodiness. In general, the transparency of water-based paint is determined by the ...

• wetting agent
• leveling agent
• silicone additives

• 2020-02-22 14:49:19
• admin

Classification and characteristics of waterborne coatings - Waterborne acrylic coatings The emulsifier that USES when polymerization can be anionic, also can be nonionic or cationic, corresponding latex and the lacquer that make also can call anionic, nonionic or cationic. Acrylic waterborne wood lacquer is a variety of applications that have been used earlier and are still in large quantities. Si...

• Phenyl acrylic water based paint
• Fluorocarbon water based paint
• Silicone acrylic water based paint

• 2020-02-21 17:52:50
• admin

Defoamer is one of the most difficult additives in waterborne wood coatings to control the balance between defoaming and leveling.The paint liquid will generate bubbles during the application due to agitation .If the bubbles present in the paint are not removed in time, the film will dry and form an unacceptable flaw.The paint also produces air bubbles during production, pumping and filling. Defoa...

• defoamer agent
• Machine silicon defoaming agent
• waterborne wood lacquers

• 2020-02-21 16:55:34
• admin

The types and functions of surface control agents include: 1.Improve flow and leveling 2.Reduce friction coefficient and increase slip 3.Enhanced scratch resistance 4.Anti-blocking 5.Enhance the arrangement of matte powder, etc. 6.Special feel, such as softness, etc. 7.Others such as improving the water resistance and stain resistance of the coating film On the one hand, they balance the surface t...

• Organosilicon agent
• surface control agents
• wax emulsions

• 2020-02-20 22:28:22
• admin

What parameters of resin determine coating gloss? Question: What parameters of the resin determine the gloss of the film? Some people say that it is solid content, some people say it is OH value. So, what is the most important determinant of gloss? Answer: There are many parameters that determine the gloss of the paint film. The saturation of the resin: that is, its monomer structure, this index d...

• resin
• resin emulsion
• solid content

• 2020-04-08 16:03:24
• admin

1.Introduction to silicone acrylic emulsion Silicon-acrylic emulsion is a kind of composite emulsion. It is a copolymer emulsion of organosilicone and acrylate.Acrylic resin has many excellent characteristics, such as weather resistance and light resistance, long time under ultraviolet irradiation is not easy to yellow。In addition, it also has flexibility, so it is often used as a leather finishin...

• water based polyurethane
• Silicon acrylic emulsion
• water based polyurethane emulsion

• 2022-07-09 11:38:16
• admin

1.After besmear brushes its film sex is good, the surface after coating solidifies can form uniform rubber shape elastomer, and this kind of coating suits special-shaped structure very much. 3.It is very convenient when construction, suit any besmear to brush means, be it wet surface also can construct. 4.Coating itself is absolutely environmental protection, non-toxic without any smell, the use o...

• non stick pan silicone
• non stick silicone
• nonstick cooking silicone

• 2022-07-09 11:06:53
• admin

Waterborne polyurethane is often used in the preparation of waterborne coatings because of its excellent film formation and adhesion, excellent flexibility and wear resistance.However, water-based polyurethane dispersion contains a lot of surfactant, easy to produce bubbles, and because of the special properties of water-based polyurethane, it is necessary to use the characteristics of water-based...

• defoamer
• antifoam defoamer
• silicone defoamer

• 2022-07-09 10:59:52
• admin

Plastic film as the object of packaging printing, many kinds, and the use of printing also involves many aspects, so the variety of this kind of ink is extremely wide.In particular, this ink shall have the characteristics of fastness to adhesion printing effect processing tolerance and other requirements.The surface of plastic film is smooth, and the ink can not be permeated, so it must be printed...

• printing ink for plastic
• plastisol ink screen printing
• silk screen printing glass ink

• 2022-07-28 16:19:29
• admin

Silicone antifoaming agent is a white viscous emulsion.It has been used in various industrial fields since the 1960s, but large-scale and comprehensive rapid development began in the 1980s.As silicone defoaming agent, its application field is also very wide, more and more attention by all walks of life. In chemical industry, papermaking, paint, food, textile, pharmaceutical and other industrial de...

• antifoam chemical
• silicone antifoam
• silicone antifoam emulsion

• 2022-08-08 16:55:53
• admin

In the process of coating manufacturing, it is necessary to belong to the hydrophilic polar material Yan, fillers dispersed to belong to the hydrophobic non-polar material organic base material.In order to increase the affinity between inorganic matter and organic polymer, it is generally necessary to use coupling agent or other surfactants to treat the surface of inorganic matter, so that it chan...

• silicone surfactant
• silicone polyether surfactant
• coupling agent

• 2023-06-08 17:20:36
• admin

Surfactants are now used not only in herbicides but in all forms of pesticides. Surfactants can be used to make pesticide preparations that can not be used directly. As a pesticide additive applied to pesticides, it can not only improve the use effect of pesticides, but also reduce the amount of pesticides, reduce the impact of pesticides on the environment, and bring great benefits to agricultura...

• Suspoemulsion
• Agricultural organosilicon additives
• organosilicon additives

• 2023-09-01 17:36:28
• admin

Advantages and disadvantages of the same type of defoamer Organic defoamer such as mineral oils, amides, low alcohols, fatty acids, fatty acid esters and phosphate esters has been studied and applied earlier, belonging to the first generation of defoamer, which has the advantages of easy access to raw materials, high environmental performance and low production cost.The disadvantages are low defoa...

• silicon defoaming agent
• anti-foaming agent
• defoaming agent