Categories
new blog
Waterborne polyurethane (WPU) is a water-based dispersion material, and its unique low viscosity characteristics often bring construction challenges such as flow hanging and penetration. In order to solve these problems and improve its construction performance, self-leveling performance and storage stability, the addition of thickener has become a key step. The thickener not only endows the water-...
The hardness and softness of the water-based acrylic resin can be adjusted according to specific needs, but it is usually biased towards the harder side. First, the characteristics and application of water-based acrylic resin Water-based acrylic resin is an environmentally friendly water-based resin, with non-toxic, easy to clean, dry fast and other characteristics, widely used in furniture, packa...
The final state of waterborne polyurethane is a solid film. During the process from emulsion to solid film, accompanied by the evaporation of water and the concentration of water dispersion, the latex particles are close to each other. Before the solid content reaches 74%, the dispersion particles can move in the continuous phase of water. Under the influence of water/air interfacial tension, the ...
Due to the hydrophobic properties of waterborne polyurethane resin, it is difficult to dissolve in water or disperse uniformly, and the high reactivity of isocyanate groups to water, the direct synthesis of waterborne polyurethane faces many challenges. Therefore, to achieve the preparation of waterborne polyurethane, the primary strategy is to cleverly integrate hydrophilic functional groups (suc...
The viscosity of waterborne polyurethane emulsion has different distribution range, and the viscosity of waterborne polyurethane emulsion has different requirements when applied in different fields. In addition to adjusting the viscosity by adding thickening agents, it can also affect the viscosity of waterborne polyurethane emulsion from the molecular structure, including the content of hydrophil...
Water based polyurethane emulsion has soft properties, so that it has good adhesion when attached to the surface of the object; At the same time, it can maintain a certain strength and does not crack. It is especially suitable for articles in high temperature, humid and chemically corrosive environment. This substance also has superior wear resistance and film smoothness, so it can form a uniform ...
Waterborne Polyurethane (WPU) is a polyurethane system using water as a solvent or dispersion medium. In recent years, with the increasingly strict environmental regulations and the improvement of people's environmental awareness, waterborne polyurethane, as an environmentally friendly material, has received extensive attention and research. First, the characteristics of waterborne polyuretha...
1.Touch optimization: the pursuit of softness and fullness In view of the frequent skin-to-skin contact of fabrics, the primary goal of the design of waterborne polyurethane coatings is to achieve soft touch and full form. This requires us to carefully balance the ratio of hard and soft segments in the formulation adjustment, while carefully selecting the types of both to ensure that the coating r...
There are several main reasons for water-based emulsion breaking: 1.Large temperature changes, water-based emulsion is easy to separate into water phase and oil phase at high temperature, and easy to crystallize at low temperature. 2.The selection of emulsifier is improper, and the type and dosage of emulsifier are different, which has a great impact on the stability of emulsification. The choice ...
Before the textile coating, it is necessary to pretreat the textile surface to ensure the adhesion and quality of the coating. Common surface treatment methods are: cleaning, degreasing, polishing and so on. Cleaning can be done with hot water or solvents, degreasing can be done with alkaline or acid degreasing agents, and polishing is done by mechanical removal of surface hair. The choice of coat...
First, what is the adhesion of resin Resin adhesion refers to the ability of the resin coating to adhere to the substrate. Insufficient adhesion of the resin on the surface can cause it to fall off or foam, and affect the service life and performance of the product. Second, how to effectively improve the adhesion of resin 1. Surface treatment Surface treatment is an effective method to improv...
Leather finishing is generally divided into three parts:Primer coat, middle coat, and topcoat.Primer requires strong adhesion, hiding power, good embossing formability and stereotyping, and the middle coating further covers and modifies the color, and finally achieves the visual and physical performance requirements through the topcoat.With a specific topcoat, the effect of extinction or ligh...
Polyurethane coating film bright and full, hard wear-resistant, oil, acid, chemical and industrial waste gas resistance, good electrical properties, and a variety of resin miscible, can be adjusted in a wide range of formulations to meet different needs. Widely used in wood, automobile, aircraft, machinery, electrical appliances, instruments, plastics, leather, paper, fabric, petrochemical an...
(1)Paint for transportation vehicles cars, ships, aircraft and other transportation vehicles, in addition to meet the requirements of gloss, friction resistance, adhesion, etc., due to its special frequency of use and environment, the waterproof performance of waterborne polyurethane coatings used is also put forward high requirements. The water-based polyurethane waterproof coating referred to he...
Fabric coating is a kind of fabric treated by a special process. It can form a uniform layer of covering material on the surface of the fabric, so as to achieve waterproof, windproof, breathable and other functions. Textile Coating, also known as glue coating, that is, acrylic coating, is the most common and most common kind of coating at present. As a textile person, you must know 15 kinds of coa...
First, the principle of adding water-based ink additives When using water-based ink additives, there are some basic principles that need to be followed. First, the resin and ink should be combined first, and then additives are added. Secondly, the appropriate time and method of addition should be selected according to the type and use of the selected additives. Second, the right steps 1.With resin...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية