Categories
new blog
The hardness and softness of the water-based acrylic resin can be adjusted according to specific needs, but it is usually biased towards the harder side. First, the characteristics and application of water-based acrylic resin Water-based acrylic resin is an environmentally friendly water-based resin, with non-toxic, easy to clean, dry fast and other characteristics, widely used in furniture, packa...
The final state of waterborne polyurethane is a solid film. During the process from emulsion to solid film, accompanied by the evaporation of water and the concentration of water dispersion, the latex particles are close to each other. Before the solid content reaches 74%, the dispersion particles can move in the continuous phase of water. Under the influence of water/air interfacial tension, the ...
The viscosity of waterborne polyurethane emulsion has different distribution range, and the viscosity of waterborne polyurethane emulsion has different requirements when applied in different fields. In addition to adjusting the viscosity by adding thickening agents, it can also affect the viscosity of waterborne polyurethane emulsion from the molecular structure, including the content of hydrophil...
Water based polyurethane emulsion has soft properties, so that it has good adhesion when attached to the surface of the object; At the same time, it can maintain a certain strength and does not crack. It is especially suitable for articles in high temperature, humid and chemically corrosive environment. This substance also has superior wear resistance and film smoothness, so it can form a uniform ...
①The residual ink is converted into gray black ink According to the principle of color science, the complementary color of the ink mixed together, its hue will become gray black (red + green, yellow + blue-purple). Therefore, we can use this principle to deploy the complementary ink into gray-black ink by deploying the special color ink, and add it to the black ink in a certain proportion to use i...
Most coatings are composed of a base material (one or more resin mixtures), pigments (including physical pigments and functional pigments), solvents and some small amounts of additives and other coating raw materials. In the production of coatings, after the selection of various coating raw materials necessary for coating components, the next is how to make reasonable use of the technical and econ...
First, what is the adhesion of resin Resin adhesion refers to the ability of the resin coating to adhere to the substrate. Insufficient adhesion of the resin on the surface can cause it to fall off or foam, and affect the service life and performance of the product. Second, how to effectively improve the adhesion of resin 1. Surface treatment Surface treatment is an effective method to improv...
First, emulsion resin Emulsion resin refers to resin particles suspended in water, which is widely used. There are many different emulsion resins on the market, such as polyurethane, acrylic, etc. They have the characteristics of strong adhesion, fast drying, etc., suitable for various printing and coating fields. Second, solvent-based resin Solvent-based resins should pay attention to environment...
First. Application of paper coating Paper coating is mainly used in packaging printing, book printing, poster printing and other fields, which can improve the gloss of paper, waterproof, oil-proof, wear-resistant, anti-folding and other functions. The paper coating can not only improve the quality of the paper, but also enhance the durability, stability and aesthetics of the paper, and is also a s...
First, resin reaction temperature standard The reaction temperature of resin is an important process parameter, which has great influence on the reaction rate, physical properties and chemical stability of resin. In general, the resin reaction temperature should be determined according to different resin types and catalyst types. The following are some commonly used resin reaction temperature stan...
Flexo is a flexible, high resolution, warped letterpress plate. In recent years, flexo printing has developed rapidly in the field of printing, and its development prospects are generally optimistic. Flexographic printing presses transfer the right amount of ink to the substrate through a unique mesh roller. The appropriate use of ink is directly related to the printing production operation and pr...
I.Definition The emulsion is a colloidal system with a particle size of 0.1~10μm formed by two insoluble liquids through the action of emulsifier. Secondary dispersion refers to a colloidal system formed by particles (or molecular groups) less than 1μm are dispersed into a continuous phase (such as water) under the action of a stabilizer. By definition, the formation of emulsions and secondary dis...
1.Type: There are three main types of water-based acrylic resins, including emulsion, water dispersion and aqueous solution. The emulsion is synthesized by emulsifying olefins in water under the action of water-based free radical initiator. The aqueous dispersion is synthesized by free radical solution polymerization or stepwise solution polymerization. Aqueous acrylics are directly soluble in wat...
Water-based resins can be divided into water-emulsion, water-dispersed and water-soluble according to their appearance. There are many people think that this is the same resin, in fact, it is not only the appearance is not the same and the use and characteristics are very different. Water-based acrylic resins are generally divided into water-based emulsion acrylic resins and water-soluble acrylic ...
Water-based coatings, acrylic resins are commonly used resins that can not be avoided, commonly used metal coatings, ABS, PC coatings, glass coatings that require hardness, most of them will be applied to acrylic resins, especially solid acrylic resins. There are many varieties of solid acrylic resins, and some solid acrylic resins can be used to produce water-based paints, including the popular l...
Leather finishing is generally divided into three parts:Primer coat, middle coat, and topcoat.Primer requires strong adhesion, hiding power, good embossing formability and stereotyping, and the middle coating further covers and modifies the color, and finally achieves the visual and physical performance requirements through the topcoat.With a specific topcoat, the effect of extinction or ligh...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية