Categories
new blog
Classification and characteristics of water-based coatings - water-based alkyd paints The vegetable oil is reacted with an acid anhydride after alcoholysis to form an alkyd resin, and the content of the hydrophilic group can be increased to form a water-soluble or water-dispersible resin.Water-soluble water-based alkyds are quite transparent in appearance but have color,The alkyd emulsion was brow...
Rheological AIDS provide a leveling effect under high shear conditions, allowing the painted fluid to level out as quickly as possible, reducing brush marks and avoiding spatter. However, as the drying time goes by, this leveling effect weakens and the film is fixed, which can prevent the fluid from sagging on the vertical surface. Rheological additives can be divided into high, medium and low she...
Types, characteristics and applications of main rheological AIDS Variety Feature Application Methyl Cellulose The water system is thickened and has high efficiency, but the water resistance is not good, it is easy to be degraded by microorganisms, moldy and smelly, and the thixotropy after thickening with the system is strong, and the leveling property is not good. Generally not used in waterborne...
Some surface properties of plastic substrate affect coating, and the properties related to coating mainly include the following aspects: Due to the characteristics of the plastic substrate itself, its smooth and compact, low surface energy is not conducive to the wetting and adhesion of the coating on the substrate. The crystallinity of the plastic affects the adhesion of the film, and its crystal...
The adhesion of the paint film is caused by the mutual attraction between the paint and the polar groups on the surface of the coated substrate, and the mutual attraction between the polar groups is based on the premise that the paint is well wetted on the surface of the coated substrate.Since the wet condition of the coating on the surface of the coated substrate depends on the surface tension of...
Sinograce Chemical - Jingangtai rafting trip On August 17th, Sinograce Chemical Marketing Center carried out the second quarter group building activities of the Rapids Warriors, blue sky and white clouds, green mountains and green waters, riding a rubber boat, leaping in the cool water, Sometimes light as a swallow, Now and then it gallops like a tiger, the event The thrills not only make the...
The third step in the treatment of water-based paint coated substrates is sealing. The role of the water-based putty is to make the surface of the substrate such as wood not very regular and smooth and minor defects and defects, such as pores, fine cracks, pits, joints and concrete, to reduce the surface roughness and increase the flatness.The requirements for water-based putty are good adhesion a...
Spraying construction paint film than brush paint film more flat. Spray with water-based wood paint should be added on the basis of the original paint 5% ~ 30% of the tap water dilute after use, for the viscosity of the paint water should also increase, the diluted paint after its coating a 4 cup viscosity should be around 18 ~ 20s. Dilute mix well should be static at least 20 minutes, until the b...
Waterborne paint testing and standards:hardness Hardness is one of the most important physical properties of a coating. Coating hardness reflects the coating's ability to resist constant dents, scratches, scribes, and penetrations caused by a hard object. Testing the hardness of materials with different methods will give different results because the testing methods are for different amounts of ma...
Polyurethane and general epoxy products application The use of the two products requires strengthened compressive tensile cement floors or floors and drainage ditches that are resistant to corrosion by strong acids and alkalis, such as chemicals, metallurgical plants, electroplating plants, power plants, pharmaceutical plants, PCB circuit board plants, paper mills, Hardware factory, printing and d...
Thank you for the New Year gift of our company. In the New Year, we hope to make our products better and serve our customers better,Hope the performance increase day! Sinograce Chemical wish you a happy New Year!
In February 2020, during the severe situation of covid-19, Sinograce Chemical company dared to assume social responsibilities and made a modest contribution to the fight against covid-19. It donated alcohol and 84 disinfectant and other epidemic prevention materials to hefei primary and secondary schools and universities for daily disinfection of schools, with a total of 10 tons of 84 di...
With the development of The Times, people's invention is more and more magical, super hydrophobic coating is one of them, the use of the product can make the surface of the pollutants or dust can be gravity, rain or wind and other external forces automatically removed or degraded.What factors will affect the coating hydrophobicity, let us know about it. 1 hydrophobic principle The wettability of w...
Nano coating is a very advanced process in recent years. This high-tech coating is not only non-toxic and harmless, but also can effectively prevent moisture and moisture erosion. What benefits can nano coating bring to businesses. Improving Product Quality Nano coating can protect the product from PCBA layer.Assuming no such protection, once liquid such as water or sweat enters, the product may b...
With the development of The Times, many products in the production of nano coating, the coating can be very good protection from water and air substances invasion, the use of nano coating can obtain what characteristics, let us know about it. 1.Features The hardness of the coating is extremely high, which is more than 3 times that of tool and die steel, even more than 4000HV(ceramic characteristic...
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top