• 2020-02-29 17:27:50
• admin

Common problem of lacquer of waterborne woodwork: varnish besmear film is not level off, burnish is not even Phenomenon : Wood is filled with putty hole processing, after sealing the bottom, coating brush varnish, coating film flatness is low, luster is not uniform. Cause : Hole putty poor quality, loose, solvent absorption. The wood fiber and pith ray on the wood surface are relatively loose. The...

• waterborne wood lacquer
• varnish paint
• Water based Tackifier Dispersion

• 2025-01-10 17:36:18
• admin

(1) The use of hydrosol Hydrosol is a polymeric dispersion of very small particles, which has the characteristics of both emulsion system and solution system, and can effectively improve water resistance (2) Reduce the amount of emulsifier Although emulsifier plays an important role in the formation of micelles in polymerization and the stability of the polymerization emulsion, it is als...

• tackifier chemical
• tackifier for water based adhesive
• tackifier resin adhesive

• 2025-01-07 15:12:33
• admin

Water-based viscosification emulsion plays a very important role in water-based acrylic pressure sensitive adhesive, which can improve the adhesion strength and initial viscosity of pressure sensitive adhesive on high and low energy surface, so as to achieve the best balance point, and improve the application range and grade of pressure sensitive products. Today, I will introduce you to the applic...

• viscosifier
• liquid rosin
• tackifier resin

• 2025-12-04 16:03:44
• admin

In many applications, acrylic adhesives do not require the addition of tackifying resins to improve pressure sensitivity, but in most cases, they are necessary: To increase initial tack and peel strength To improve adhesion to low surface energy materials Tackifying resins are commonly used in acrylic emulsion systems, such as paper labels and packaging tapes. They improve peel strength on difficu...

• tackifier
• tackifier acrylic
• tackifier for water based adhesive