The main reason for water-based ink drying

1.Water-based ink: water-based carton ink, non-woven ink, paper towels, paper cups and paper bags and other packaging printing;

2.Water-based polishing oil series: water-based polishing oil, polishing oil, high gloss, wear-resistant, matte, waterproof, antifreeze and other environmental protection water-based products. Water-based ink drying is mainly caused by the following reasons:

Water-based ink drying is mainly caused by the following reasons:

1.The old version was not cleaned when printing.

2.The solvent drying speed is too fast (printing speed and solvent volatilization speed does not match).

3.Dry hot air blowing to the layout.

4.When there is dust, moisture, bubbles and other impurities curing in the contact point between the scraper and the printing ink, the transfer rate of the ink will be reduced due to the decrease in the actual amount of ink in the net hole, and some thicker particles will even be embedded in the net hole.

5.The precision and Angle of electric carving of the mesh hole will also affect the plate making

6.The transfer to the ink, resulting in insufficient or lost outlets.

7.The quality of ink and solvent is also one of the reasons for blocking plate, if the fluidity of the ink is not good, the printing viscosity is too high, the ink has deteriorated or mixed with different series of ink, the use of inappropriate solvent or solvent ratio, and even the improper operation of adding solvent with ink will affect the transfer of ink, resulting in blocking plate.

Sinograce Chemical production ink water-based resin, welcome to buy.