Categories
new blog
Plastics are classified into two types: thermosetting and thermoplastic.Among them, thermosetting plastics have high cross-linking density, good solvent resistance and heat resistance, relatively high surface polarity, and wide range of coatings available.For example, unsaturated polyester is called polyester fiberglass. The texture is hard and polar, and there are many coatings that can be used. ...
Some surface properties of plastic substrate affect coating, and the properties related to coating mainly include the following aspects: Due to the characteristics of the plastic substrate itself, its smooth and compact, low surface energy is not conducive to the wetting and adhesion of the coating on the substrate. The crystallinity of the plastic affects the adhesion of the film, and its crystal...
Material property (pu for short) is divided into: Pouring polyurethane elastomer (CPU for short) is one of the most widely used polyurethane elastomers with the largest yield. Thermoplastic polyurethane elastomer (TPU) -- thermoplastic polyurethane elastomer accounts for about 25% of the total amount of polyurethane.Mixed polyurethane elastomer (MPU) - accounts for about 10% of the total amount of...
Water - based ink is composed of adhesives pigment additives and other substances such as uniform slurry material,Binders provide ink with the necessary transfer properties, pigments give ink color. Water-based ink linker is mainly divided into two types: water dilution and water dispersion.The former can be used in many types of resin, such as maleic acid resin lac maleic acid resin modified shel...
(1)The labels on the market (especially film labels) mostly use screen printing and flexographic printing, which not only has a complex processing process, a long cycle, but also has poor timeliness. (2)In terms of product design, the selection of design scheme needs to be modified repeatedly, which is not only troublesome, but also costly (3)The traditional printing method to achieve variable dat...
Water-based ink is composed of resin (water-soluble resin colloidal dispersion emulsion polymer) aqueous amine (mainly ammonia) pigment (organic pigment inorganic pigment) and additives.The so-called water-based ink is mainly water as a solvent by scientific processing, compared with other printing ink, water-based ink, because it does not contain volatile toxic organic solvents, so in the printin...
In the process of coating manufacturing, it is necessary to belong to the hydrophilic polar material Yan, fillers dispersed to belong to the hydrophobic non-polar material organic base material.In order to increase the affinity between inorganic matter and organic polymer, it is generally necessary to use coupling agent or other surfactants to treat the surface of inorganic matter, so that it chan...
Introduction Of Electrostatic Flocking Electrostatic flocking is widely used and popular in industrially developed countries, such as the United States, Italy, Germany and Japan, because of its unique decorative effect of suede and embroidery, as well as its simple process, low cost and strong adaptability.In recent years, a variety of electrostatic flocking products have also been developed...
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. On January 16, 2023, Sinograce Chemical held a year-end work summary meeting and a New Year party. Sinograce Chemical wishes all customers a happy New Year and a better and better New Year.
The addition of wetting dispersant has obvious effect on the foam of some water-based ink.For example, polyacrylic acid wetting dispersants foam more than other types of wetting dispersants.Generally speaking, wetting dispersant foam with low dispersion capacity is also less. If diisobutyl sulfonate is based on disate, there is little foam at its content of 0.1-0.25%. The use of thickeners will ma...
Water-based pressure-sensitive adhesive is a type of adhesive that uses water as a solvent and is pressure-sensitive, that is, it can adhere quickly to the surface when slight pressure is applied. Due to its environmental protection, non-toxic, cost-effective, adjustable viscosity and other advantages, it has gradually become the mainstream product in the pressure sensitive adhesive market. Accord...
That is, metal foil printing adhesive, commonly known as hot stamping adhesive, is a special performance adhesive, but also the key to the success of metal foil printing. product presentation Hot stamping adhesive consists of a special adhesive composed of a suitable hot melt adhesive and a bonding resin, which is composed of two points: 1.There are polyamide series, polyester series, polyethylene...
There are four common waterborne polyurethane thickeners: ①Inorganic thickeners, such as flake silicates, fumed silica, etc.; ②Natural organic thickeners, such as cellulose ethers; ③Synthetic organic thickeners, such as polyacrylates, polyvinylpyrrolidone; ④associative thickener. This paper mainly introduces the associated emulsion thickener. Associative emulsion thickeners are non-ionic synthetic...
First. Application of paper coating Paper coating is mainly used in packaging printing, book printing, poster printing and other fields, which can improve the gloss of paper, waterproof, oil-proof, wear-resistant, anti-folding and other functions. The paper coating can not only improve the quality of the paper, but also enhance the durability, stability and aesthetics of the paper, and is also a s...
Leather finishing is generally divided into three parts:Primer coat, middle coat, and topcoat.Primer requires strong adhesion, hiding power, good embossing formability and stereotyping, and the middle coating further covers and modifies the color, and finally achieves the visual and physical performance requirements through the topcoat.With a specific topcoat, the effect of extinction or ligh...
Compared with natural latex, the commonality of synthetic latex lies in its excellent storage stability, mechanical stability, chemical stability and freeze-thaw stability during storage and application. The characteristics of different kinds of synthetic latex are as follows: Styrene-butadiene latex Butadiene series latex is a copolymer latex synthesized mainly by butadiene and styrene monomer. B...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية