Categories
new blog
Enhance the adhesion of UV ink and UV varnish on paper products! The tape won't come off Fast drying speed to meet the needs of production line Good affinity with UV varnish and UV ink Excellent strength and toughness Water-based UV base oil for high adhesion paper products Anhui Sinograce Chemical waterborne UV primer for high adhesion paper products is a high-performance waterborne coa...
Waterborne polyurethane (WPU) is a water-based dispersion material, and its unique low viscosity characteristics often bring construction challenges such as flow hanging and penetration. In order to solve these problems and improve its construction performance, self-leveling performance and storage stability, the addition of thickener has become a key step. The thickener not only endows the water-...
Rubber mold, silicone mold, shoe mold, latex pillow mattress mold, anti-stick easy mold Teflon spray, good model flon coating, non-stick mold surface treatment process The role of mold coating Molds are common tools in the manufacturing industry and are used to make a variety of products. In order to capture the service life and production efficiency of the mold, people often coat the surface of t...
The most important difference between non-stick cookware and ordinary cookware is that the surface is coated with a layer of non-stick paint, and the Teflon non-stick cookware commonly used on the market is to coat the main raw material of fluorinated resin such as polytetrafluoroethylene coating on the metal surface such as aluminum, copper or iron, and through sintering. Properties of NI-PTFE co...
Insufficient or uneven amount of glue due to insufficient amount of glue produced by the white spot can be observed in the composite machine. In the dry composite process, the coated adhesive must be able to fill the bumps and bumps on the surface of the ink and film to avoid appearance defects such as obvious white spots. When the water-based adhesive dry composite is used to produce lightweight ...
The final state of waterborne polyurethane is a solid film. During the process from emulsion to solid film, accompanied by the evaporation of water and the concentration of water dispersion, the latex particles are close to each other. Before the solid content reaches 74%, the dispersion particles can move in the continuous phase of water. Under the influence of water/air interfacial tension, the ...
Due to the hydrophobic properties of waterborne polyurethane resin, it is difficult to dissolve in water or disperse uniformly, and the high reactivity of isocyanate groups to water, the direct synthesis of waterborne polyurethane faces many challenges. Therefore, to achieve the preparation of waterborne polyurethane, the primary strategy is to cleverly integrate hydrophilic functional groups (suc...
The viscosity of waterborne polyurethane emulsion has different distribution range, and the viscosity of waterborne polyurethane emulsion has different requirements when applied in different fields. In addition to adjusting the viscosity by adding thickening agents, it can also affect the viscosity of waterborne polyurethane emulsion from the molecular structure, including the content of hydrophil...
Water based polyurethane emulsion has soft properties, so that it has good adhesion when attached to the surface of the object; At the same time, it can maintain a certain strength and does not crack. It is especially suitable for articles in high temperature, humid and chemically corrosive environment. This substance also has superior wear resistance and film smoothness, so it can form a uniform ...
Waterborne Polyurethane (WPU) is a polyurethane system using water as a solvent or dispersion medium. In recent years, with the increasingly strict environmental regulations and the improvement of people's environmental awareness, waterborne polyurethane, as an environmentally friendly material, has received extensive attention and research. First, the characteristics of waterborne polyuretha...
1.Touch optimization: the pursuit of softness and fullness In view of the frequent skin-to-skin contact of fabrics, the primary goal of the design of waterborne polyurethane coatings is to achieve soft touch and full form. This requires us to carefully balance the ratio of hard and soft segments in the formulation adjustment, while carefully selecting the types of both to ensure that the coating r...
Aluminum foil can also be printed with water-based ink. As a non-absorbent substrate, aluminum foil poses a major challenge to water-based ink printing. However, some aluminum foil products that require food-grade printing cannot be printed with oil-based inks, so water-based inks have become the best choice. However, due to the poor absorption of aluminum foil to water-based ink, many inexperienc...
First, water-based lotion Aqueous emulsion is a colloidal dispersion system with water as the continuous phase and oil or other non-aqueous substances as the dispersing phase. It is a stable dispersion system formed by tiny oil droplets coated with surfactants. Water-based emulsion has many significant advantages, such as its low viscosity, easy to brush, easy to clean, non-toxic and harmless. The...
There are several main reasons for water-based emulsion breaking: 1.Large temperature changes, water-based emulsion is easy to separate into water phase and oil phase at high temperature, and easy to crystallize at low temperature. 2.The selection of emulsifier is improper, and the type and dosage of emulsifier are different, which has a great impact on the stability of emulsification. The choice ...
Before the textile coating, it is necessary to pretreat the textile surface to ensure the adhesion and quality of the coating. Common surface treatment methods are: cleaning, degreasing, polishing and so on. Cleaning can be done with hot water or solvents, degreasing can be done with alkaline or acid degreasing agents, and polishing is done by mechanical removal of surface hair. The choice of coat...
The role of wax emulsion in various coatings, in the coating formulation, polyethylene wax emulsion can effectively improve the wear resistance of the paint film, the paint film is very smooth, effectively reduce the friction coefficient of the coating, play a non-adhesive role, but also improve the service life of the product. 1.Synthetic wax emulsion can improve the toughness of the coating: whe...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية