High quality durable fabric waterproof spray paint product

SINOGRACE Chemical provides database on CAS including chemical name, synonyms, structure, formula, application etc,and also offers price quotation on durable fabric waterproof spray paint product different grades.If you want to buy durable fabric waterproof spray paint product, please feel free to contact sales@sinogracechem.com 

Durable fabric waterproof spray paint product PF-206 from China Sinograce Chemical company, is an Yellowish aqueous emulsion and containing no flammable solvents, the new C6-fluorocarbon shows full performance regarding water, soil and oil repellency after drying. Suitable for fiber types, laminates, leather and hard surfaces.

Type

-Textile self-cleaning nano coating

Key features

-Free of PFOA and PFOS

-Fabric color and handle are not affected

-Outstanding and durable oil, soil and water repellency

-No silicone-based and metalorganic compounds contained

-Resistant to washing and dry cleaning when combined with crosslinker

Typical properties

pH (50% in water)： 3.0-5.0

Density (g/cm3 at 20℃)： 1.07±0.03

Viscosity (mPa·s at 20℃)： 30-150mPa·s at 20℃

Dilute ratio： 1:10

Application

-Fabric, Textile, Cotton, Wool, Polyester fabric, Suede/leather corduroy etc.

Home application

-Clean the textile products (clothes, shoes etc)

-Dry it under room temperature

-Dilute the PF-206 by mixing with water (1 part PF-206 to 10~12 parts water)

-Spray the diluted solution on the textile products or dipping it into solution

-Dry it under high temperature (>100℃) for 10-15min by using dryer, household electric iron, blower and laundry drier etc.

Industrial application

The preparation of solution

-Firstly, add the quantitative PF-206 into a container, and then the quantitative water is added into. Finally, stir the solution at a

low speed until uniformity.

-While using it with crosslinking agent, penetrating agent, crease resistant resin and other additives together, all of these additives

should be separately diluted and avoid additives raw solution mixing.

The recommended dosage

-Polyester fabric: 10~25 g/L

-Nylon fabric: 10~ 25g/L

-Polyester or cotton fabric: 15~40 g/L

The application method

-Pad-roll

-Predrying temperature: 100~120℃

-Dry: Recommended 150-170℃ by the stenter setting machine for 60 seconds.

Storage and handling

According to non-dangerous goods transport

For other information, please refer to the attached PDF manual