Water Based Dry Lamination Adhesive For PET/ BOPP/ MPET Film paper packaging box glue

Description

water based acrylic polymer emulsion adhesive designed for dry lamination BOPP/PET film to paper process.Dry bond lamination is the process of coating the adhesive to plastic film, drying the adhesive with heat and air flow and then laminating the adhesive to a second substrate(paper/paper board/cardboard etc..) via a heat compression nip.

water based adhesive, free of toluene, eco-friendly.

Type

Self-crosslinking acrylic polymer dispersion

Key Features
-Eco-friendly It is mono-component adhesive with very good adhesion to flexible film

-Low VOC and benzene free

-Good coating effect

-Low dosage surface sizing and low cost

-Apply to manual machine, semi-automatic and full-automatic machine

-Good brightness, high peel strength, no bubbles, smooth, good toughness

-Lower consumption than oil / solvent based lamination adhesives

-Easy to clean the lamination equipment

Can be use for highest speed automatic dry lamination machine.

Typical Properties

Appearance: Milky white liquid

pH: 6.0-8.0 offer different viscosity adhesive, to meet slow, middle and high speed machine

Solid content: 40±1%

Type of emulsion: Anionic

Viscosity (25℃): 100-200mPa·s

Initial adhesive: >14# ball

Holding power: >28h

180° Peel strength: >8N/25mm it can be used for manual, semi-auto, automatic and high speed full automatic lamination machines

Application

-Lamination of BOPP films to printed paper/duplex board

Storage And Handling

-Available in 200 kg/ barrel or 1000 kg/ barrel (IBC)

-Store products in tightly closed original containers at 5-35℃

-Shelf life: 6-9 months from delivery date

-According to non-dangerous goods transport