• proof coating
    Water based liquid proof coating for textile PF-201
    Non-toxic nanocoating Contact angle of 150º Strong non-stick properties Inhibits the growth of bacteria Super hydrophobic and oleophobic properties Does not affect the feel of the fabric and breathable Washing and cleaning agent resistance up to 20~30 washes
    read more
  • brick water repellent
    Water based building hydrophobic coating PF-212
    Good hydrophobic property Water based hydrophobic coating Good permeability and transparent coating Excellent adhesion and good abrasion resistant Applied to concrete, rooftop, brick, stone and other building products etc
    read more
  • hydrophobic coating spray
    Super hydrophobic coating aerosol spray PF-301
    Slight odor Easy to carry and use Oil resistant and dirty resistant
    read more
  • Polyether modified polysiloxane spray adjuvant
    Polyether modified polysiloxane spray adjuvant WET-628
    Description Polyether modified polysiloxane spray adjuvant WET-628 is a high permeability surfactant/wetting agent based on a polysiloxane. It lowers the surface tension of spray solutions, beyond that which is achievable with conventional adjuvants. Type Polyether modified polysiloxane Key features Nonionic Medium spreading High permeability Promotes spray volume reduction Promotes rapid uptake of agrochemicals (rainfastness) Superspreader for soluble liquid and emulsifiable concentrate formulations Typical properties Appearance:                                    Colorless clear liquid Active content (%):                           100% Density (g/cm3):                               1.01 Viscosity (cp, 25 ℃):                        100-130 Cloud Point (0.1 wt%), (℃):              49 CAS:                                                 No. 27306-78-1 Surface tension (0.1%, dyn/cm):      <22.5 Application -Plant Growth Regulators            0.025% to 0.05% -Herbicide                                    0.025% to 0.15% -Insecticide                                  0.025% to 0.1% -Fungicide                                    0.015% to 0.05% -Fertilizers and Micronutrients     0.015% to 0.1% Note: use rates are dependent on crop, agrochemical and spray volume requirements. Storage and handling Available in 25 kg/barrel or 200kg/barrel Store products in tightly closed original containers at 5-40℃ Shelf life: 12 months from delivery date According to non-dangerous goods transport How to use IN AGROCHEMICAL FORMULATIONS -WET-628 may be used as a component in agrochemical formulations. Although organosilicone surfactants are subject to hydrolysis under acidic or basic conditions, optimum performance is achieved by buffering the formulation to pH 6.5-7.5. Additionally, it is recommended that WET-628 spray adjuvant be used at a concentration of at least 5%,based on the total formulation. A TANK MIX ADJUVANT -WET-628 spray adjuvant, when used as a tank-side adjuvant may be used to improve spray coverage, improve uptake or to allow for a reduction in spray volume. WET-628 spray adjuvant is most effective as a tank-side adjuvant when spray mixtures are 1) within a pH range of 5-8, and 2) used within 24 hours of preparation. -High spray volumes, coupled with high surfactant rates, are not required to achieve sufficient coverage with WET-628 spray adjuvant. In fact, it has the potential to provide adequate coverage in many low volume spray applications at rates between 0.025% and 0.1%.
    read more
  • Flexible cementitious waterproofing emulsion
    Flexible cementitious waterproofing emulsion SA-400
    Acrylic dispersion. Used in adhesives for ceramic tile coverings. Also used for flexible, hydraulic bedding mortars, for flexible, waterproof, two-component cement-bonding mortars and for flexible waterproofing slurries.
    read more
  • Rigid waterproof emulsion
    Rigid waterproof emulsion WF-500
    A Suitable for polymer cement waterproofing slurry and polymer cement waterproof sand
    read more

Copyright © 2015-2017 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.Powered by