Future development of waterborne paint: In foreign countries, the application of waterborne paint is very wide, especially in the application of home decoration is very mature. In domestic already many enterprises are used at inside ark besmear, cane implement besmear is installed wait With the development of waterborne paint technology, waterborne paint will become a very important paint in furniture coating field. Conclusion: furniture manufacturing will face three trends in the future Environmental protection, environmental protection requirements will be increasingly high. Especially for export orders, merely meeting the requirements of national standards can no longer meet the requirements of customers. High efficiency, high efficiency of production, is one of the most stressed competitiveness of every enterprise. The shortage of labor force forces furniture manufacturing enterprises to improve the automation and assembly line operation of furniture manufacturing. Low cost, as the aggravate of competition, the profit of furniture manufacturing will be lower and lower, this asks manufacturing company should be good at using. New varieties and new technologies enable enterprises to effectively control the overall manufacturing cost.  Sinograce Chemical produces water based coating,Water-based glue, polyurethane coating , Acrylic solution .   visit us sinograce chemical: https://www.sinogracechem.com   Get a Quote Now :sales@sinogracechem.com   Telephone           :+86 0551 63459511

Application of water-based paint coating technology The Paint coating With water-based solvent: non-toxic, non-irritating, environmentally friendly, in line with modern people's fashion taste, convenient construction, good flexibility of paint film. Paint dilution and master the viscosity of the construction directly mixed with water. Advantages of water-based paint: One of the most environmentally friendly paint varieties Extremely convenient for construction Fast drying time, high construction efficiency The activation phase is longer Paint film dry, no smell Disadvantages of water-based paint: The paint film is thinner than solvent - based paint with low fullness Hardness is relatively low solvent - based coatings Common process of water-based paint: Water-based bottom, water surface Water-based bottom, oily surface, etc Common construction method of water - based paint: Mainly manual spraying Precautions for waterborne paint coating: Water-based paint is a kind of natural drying coating: construction of air temperature, relative humidity environment directly affects the drying speed, usually meet with temperature under 10 ℃, relative humidity is over 85%, please don't construction Waterborne, waterborne paint bottom, absolutely to make it fully dry, before coated with PU, NC and other oil-based coating When oily coating is done, water is general cannot do a face. It is difficult for waterborne coatings to adhere to the surface of oily coatings, which will eventually lead to weak adhesion, separation and other coating defects. (it refers to the characteristics of water-based coatings in the market at the present stage.) Coating variety collocation construction technology: in the process of coating construction, there are different requirements for different coating effects. A reasonable, appropriate coating variety collocation process, that can improve the coating effect, reduce the cost of coating, and can improve work efficiency Sinograce Chemical produces water based coating,Water-based glue, polyurethane coating , Acrylic solution .          visit us sinograce chemical: https://www.sinogracechem.com          Get a Quote Now :sales@sinogracechem.com          Telephone           :+86 0551 63459511

Abstract: Reducing the shrinkage of water-based paint film is focused on prevention,designing a rational paint formulation,controlling the paint manufacturing process, and strictly controlling the detection of paint materials, which can reduce the chance of shrinkage. Shrinkage holes have been caused, and it is usually difficult to completely solve them. It is necessary to control the degree of shrinkage holes by internal and external factors. Prevention of shrinkage cavity in water-based paint film 1) Choose a good compatibility defoamer to reduce the chance of shrinkage The prevention and solution of the problem of shrinkage of coatings focuses on controlling the raw materials, production formula and production process of the coatings to ensure the normal production and construction of the coatings. The defoaming agent is used to remove bubbles during the production process of the coatings. The construction process suppresses the generation of bubbles and breaks the bubbles. Release the bubble content air. This is the positive effect of the defoaming agent. The negative effect is to reduce the gloss of the coating film and the poor dispersion of the defoaming agent to form shrinkage cavities. The defoaming agent is a low surface tension material which is insoluble in the system. The dispersing agent with good dispersibility and compatibility can be used to minimize the damage of the shrinkage cavity, and the defoaming agent with good dispersibility and compatibility is in the coating system. It is easy to disperse, the size of the dispersed droplets is suitable, and the defoaming agent in the system is not easy to aggregate into large defoamer droplets. 2) Hydrophobic surface active dispersant used in formula production In the production of paints, raw materials and fillers are often contaminated. The ordinary hydrophilic dispersant is used to grind the surface of the paint slurry to suspend fine oil beads. In severe cases, the flocculent oil powder hybrids will float. The oil powder mixture with fine low surface tension exists inside the paint produced by using such polluted powder, and the construction shrinkage hole is difficult to control. The use of a hydrophobic surfactant-dispersing dispersant and a molecular-grade or non-mineral oil-based defoaming agent ensures the emulsification and dispersion of the oil-contaminated powder. The system has strong tolerance to raw materials and has the potential to prevent shrinkage. Reduce the occurrence of shrinkage cavities. Sinograce chemical produces a variety of additives, such as defoaming agent, wetting agent visit us sinograce chemical: https://www.sinogracechem.com Get a Quote Now :sales@sinogracechem.com Telephone               :+86 0551 63459511

Factors Affecting Shrinkage of Waterborne Coating Films In practice, the main causes of shrinkage are as follows: 1. The substrate is contaminated by oil or impurities 2. Apply a paint to the old paint or finish without sanding 3. The interval between constructions of the two paints is too long 4. Too much defoamer in the paint The following focuses on two factors: defoamer and impurity contamination. The effect of defoaming agent Emulsions, wetting agents, dispersants, defoamers, thickeners, etc. are used in latex paints. The main principles of using defoamers are as follows: The raw material contains a surface active material or a surfactant, and bubbles are easily formed. The foam hinders the dispersion of the pigment and filler, reduces the utilization rate of the equipment, prolongs the production cycle, and seriously brings about coating defects, pinholes and shrinkage cavities. After the second coating is used, the construction tool is brought into the air, and the coating wets the substrate to displace the air in the gap of the substrate. The air becomes a bubble under the action of the surface active material, so the antifoaming agent is used to eliminate these bubble. The surface tension of the defoaming agent should be less than the surface tension of the defoaming liquid. The solubility in the defoaming system is as small as possible and has good dispersibility. Can not react with other substances in the system, does not affect the stability of pigments and emulsions, has a strong diffusion capacity, and can not affect the performance of the coating. The most important choice for defoamer selection is the performance of the dry film. To protect the normal production and construction of the coating, defoamers are often used in coating formulations. From the analysis of the relationship between coating composition and properties, although the defoaming agent has little effect on the properties of coatings and coatings, it is a surfactant. The surface tension of the defoamer is lower than that of the coating system, and its HLB value is usually around 3. The defoamer is not dissolved in the coating system, but can be dispersed in the coating system in the form of tiny droplets. The optimal droplet size is the wall thickness of the bubble wall. If the droplets of the defoamer are too large or too small, the performance of the coating will be affected. The droplets of the defoamer will be too small (the excessive dispersion of the defoaming agent) will weaken the defoaming performance; if it is too large, the surface tension in the coating system will be lower than that. The presence of droplets of the bulk coating results in shrinkage of the coating film. Therefore, the shrinkage cavities caused by the defoaming agent are mainly due to the poor compatibility of the defoaming agent itself, or the poor dispersibility, the particles of the defoaming agent dispersed in the coating system are too large, or the defoaming active substances are e...