Categories
new blog
Cold winter can not stop the fiery heart, amiable yadav, traveled across the sea traveled to Anhui sinograce in the Nien water based adhesive business negotiations for the cooperation between the two sides opened the first step to success, I believe we will be more and more cooperation in the further.
Characteristics of water-based pressure-sensitive adhesive: 1. Diluted with deionized water 2. At room temperature (25 ~ 30 ℃), the glue sizing 24 hours after the bonding force to reach the maximum, can be tested. At low temperatures, the glue drying time is longer, should be based on the actual situation after the test time or sizing as much as possible after the use of heating b...
Chemical properties and performance of water-based pressure-sensitive adhesive mainly reflect in the following nine aspects: 1. Adhesive properties 2. Infiltration performance 3. Anti - peel performance 4. Early sticky and sticky performance 5. Creep shear resistance 6. Temperature resistance 7. Flame retardant 8. Anti-aging, anti-oxidation 9. ...
1. Water-based polyurethane pressure-sensitive adhesive for its environmentally friendly non-polluting characteristics, the future will become the ultimate direction of development of pressure-sensitive adhesive; cost slightly higher than the acrylic, generally used for relatively high-end industries. 2. Solvent-based pressure-sensitive adhesive as a result of a v...
Introduction: Water-based adhesives to water as a dispersion medium adhesive, is a major category of environmentally friendly adhesives. The solvent-based adhesive is a homogeneous system with organic solvents such as benzene and toluene as the dispersion medium. The water-based adhesive is a heterogeneous system with water as the dispersion medium. Classification: Water as a disper...
September 1, 2018,Anhui sinograce Chemical Co., Ltd held an event launching ceremony of “The third Orange War”.
The Selection of good quality water-based adhesive not only help to improve the production efficiency, but also to protect the appearance of the product quality. Such as widely used in the field of self-adhesive water-based pressure-sensitive adhesive, such as water-based pressure-sensitive adhesive which is widely used in the field of stickers. This adhesive has many advantages, it is particularl...
Some of the traditional glue in the adhesion of a great advantage is good adhesion, and the efficiency is very low, the most important thing is relatively low cost, most are someorganic materials. Relatively speaking,the biggest advantage of water-based adhesive is green, the traditional glue is inorganic materials, so it is not very environmentally friendly, pollution is relatively large, water-b...
Colorful paint is mainly used in imitation stone effect, so also known as liquid stone and the horizon exterior paint.is composed of incompatible two-phase components, one of the dispersion medium for the continuous phase, the other phase for the dispersed phase. Painting, through a one-time spray, you can get luxury, beautiful, colorful patterns. The pattern formed by the one-time spraying is com...
Water-in-water multi-color paint spray guns to use most of the spray, for the operation, but also because of the improper use of the gun caused by uneven distribution of the coating,the following together to see how to solve it. The smaller the gun distance, the greater the pressure of the spray, the greater the impact of the product by the pressure of the water, water-in-watercolorful paint coati...
water-based resin | water-based industrial coating (a) water paint common problems Water based paint common problem: bubble - big bubble Large bubbles are large, visible bubbles that are visible to the naked eye. Bulk bubbles generally occur during the production or application of water-based paints. Possible solutions: 1. Use appropriate defoaming agents In the process of producing water-based pa...
water-based resin | water-based industrial coating (a) water paint common problems Water - based paint common problems: bubble - microbubble Microbubbles are tiny bubbles. If there are microbubbles in the varnish layer, this will reduce the "warmness" of the wood.Each microbubble appears to be a small curved lens that reflects and refracts light, summing up, resulting in a yellow and red color red...
water-based resin | water-based industrial coating (a) water paint common problems Common problems with water-based lacquer wood paint: transparency, Color fullness of shade The complaint that often hears about paint of ability in water is paint of ability in water diapure is poor, cannot show the plump godliness of woodiness. In general, the transparency of water-based paint is determined by the ...
Common problems with water-based paint: oil slick surface of paint Problem: The finished product has floating black spots or impurities on the surface. A lot of coating produce technical personnel to had encountered similar problem, there is in coating production process "small bubble" or small black dot cannot eliminate. Carefully examine these "little bubbles" ~ they are actually small black oil...
Asked by water-based paint experts: water-based wood lacquer wood grain display is not clear enough Question: Our company is now doing the first coat of wood lacquer and tried a water-based resin (polyurethane). and there is no problem with the adhesion.The current problem is that after adding color essence, it is applied to the floor and the wood grain display is not clear enough. The amount of t...
Asked by water-based paint experts: water-based paints appear flocculated in the production process Problem: Our company produced a batch of waterborne paint last week. The formula remains unchanged. After the completion of production, the coating appears a mass flocculent,it is difficult to remove the filtration, the quality of waterborne coating is reduced. What is the cause? What method c...
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top